Hi Jiri and Benjamin, On Tue, May 07, 2024 at 04:48:14PM +0200, Johan Hovold wrote: > The Elan eKTH5015M touch controller on the X13s requires a 300 ms delay > before sending commands after having deasserted reset during power on. > > This series switches the X13s devicetree to use the Elan specific > binding so that the OS can determine the required power-on sequence and > make sure that the controller is always detected during boot. [1] > The devicetree changes are expected to go in through the Qualcomm tree > once the binding and driver updates have been merged. > [1] The reset signal is currently deasserted using the pin configuration > and the controller would be detected if probe is deferred or if user > space triggers a reprobe through sysfs. > Johan Hovold (7): > dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema > dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M > dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property > HID: i2c-hid: elan: fix reset suspend current leakage Could you consider picking the first four patches up for 6.10-rc3 so that Bjorn can take the devicetree changes? > arm64: dts: qcom: sc8280xp-x13s: fix touchscreen power on > arm64: dts: qcom: sc8280xp-crd: use external pull up for touch reset > arm64: defconfig: enable Elan i2c-hid driver Johan
