From: Hans de Goede <hdegoede@xxxxxxxxxx> [ Upstream commit 0b178b02673998f5acca5a0365a8858ca45beedb ] On x86/ACPI platforms touchscreens mostly just work without needing any device/model specific configuration. But in some cases (mostly with Silead and Goodix touchscreens) it is still necessary to manually specify various touchscreen-properties on a per model basis. touchscreen_dmi is a special place for DMI quirks for this, but it can be challenging for users to figure out the right property values, especially for Silead touchscreens where non of these can be read back from the touchscreen-controller. ATM users can only test touchscreen properties by editing touchscreen_dmi.c and then building a completely new kernel which makes it unnecessary difficult for users to test and submit properties when necessary for their laptop / tablet model. Add support for specifying properties on the kernel commandline to allow users to easily figure out the right settings. See the added documentation in kernel-parameters.txt for the commandline syntax. Cc: Gregor Riepl <onitake@xxxxxxxxx> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> Link: https://lore.kernel.org/r/20240523143601.47555-1-hdegoede@xxxxxxxxxx Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- .../admin-guide/kernel-parameters.txt | 22 ++++++ drivers/platform/x86/touchscreen_dmi.c | 79 ++++++++++++++++++- 2 files changed, 98 insertions(+), 3 deletions(-) diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 66dfc348043d6..0aeb00732820a 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -1866,6 +1866,28 @@ Format: <bus_id>,<clkrate> + i2c_touchscreen_props= [HW,ACPI,X86] + Set device-properties for ACPI-enumerated I2C-attached + touchscreen, to e.g. fix coordinates of upside-down + mounted touchscreens. If you need this option please + submit a drivers/platform/x86/touchscreen_dmi.c patch + adding a DMI quirk for this. + + Format: + <ACPI_HW_ID>:<prop_name>=<val>[:prop_name=val][:...] + Where <val> is one of: + Omit "=<val>" entirely Set a boolean device-property + Unsigned number Set a u32 device-property + Anything else Set a string device-property + + Examples (split over multiple lines): + i2c_touchscreen_props=GDIX1001:touchscreen-inverted-x: + touchscreen-inverted-y + + i2c_touchscreen_props=MSSL1680:touchscreen-size-x=1920: + touchscreen-size-y=1080:touchscreen-inverted-y: + firmware-name=gsl1680-vendor-model.fw:silead,home-button + i8042.debug [HW] Toggle i8042 debug mode i8042.unmask_kbd_data [HW] Enable printing of interrupt data from the KBD port diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c index 630ed0515b1e9..dc244e17754e6 100644 --- a/drivers/platform/x86/touchscreen_dmi.c +++ b/drivers/platform/x86/touchscreen_dmi.c @@ -9,10 +9,13 @@ */ #include <linux/acpi.h> +#include <linux/ctype.h> #include <linux/device.h> #include <linux/dmi.h> #include <linux/efi_embedded_fw.h> #include <linux/i2c.h> +#include <linux/init.h> +#include <linux/kstrtox.h> #include <linux/notifier.h> #include <linux/property.h> #include <linux/string.h> @@ -1822,7 +1825,7 @@ const struct dmi_system_id touchscreen_dmi_table[] = { { } }; -static const struct ts_dmi_data *ts_data; +static struct ts_dmi_data *ts_data; static void ts_dmi_add_props(struct i2c_client *client) { @@ -1857,6 +1860,64 @@ static int ts_dmi_notifier_call(struct notifier_block *nb, return 0; } +#define MAX_CMDLINE_PROPS 16 + +static struct property_entry ts_cmdline_props[MAX_CMDLINE_PROPS + 1]; + +static struct ts_dmi_data ts_cmdline_data = { + .properties = ts_cmdline_props, +}; + +static int __init ts_parse_props(char *str) +{ + /* Save the original str to show it on syntax errors */ + char orig_str[256]; + char *name, *value; + u32 u32val; + int i, ret; + + strscpy(orig_str, str, sizeof(orig_str)); + + /* + * str is part of the static_command_line from init/main.c and poking + * holes in that by writing 0 to it is allowed, as is taking long + * lasting references to it. + */ + ts_cmdline_data.acpi_name = strsep(&str, ":"); + + for (i = 0; i < MAX_CMDLINE_PROPS; i++) { + name = strsep(&str, ":"); + if (!name || !name[0]) + break; + + /* Replace '=' with 0 and make value point past '=' or NULL */ + value = name; + strsep(&value, "="); + if (!value) { + ts_cmdline_props[i] = PROPERTY_ENTRY_BOOL(name); + } else if (isdigit(value[0])) { + ret = kstrtou32(value, 0, &u32val); + if (ret) + goto syntax_error; + + ts_cmdline_props[i] = PROPERTY_ENTRY_U32(name, u32val); + } else { + ts_cmdline_props[i] = PROPERTY_ENTRY_STRING(name, value); + } + } + + if (!i || str) + goto syntax_error; + + ts_data = &ts_cmdline_data; + return 1; + +syntax_error: + pr_err("Invalid '%s' value for 'i2c_touchscreen_props='\n", orig_str); + return 1; /* "i2c_touchscreen_props=" is still a known parameter */ +} +__setup("i2c_touchscreen_props=", ts_parse_props); + static struct notifier_block ts_dmi_notifier = { .notifier_call = ts_dmi_notifier_call, }; @@ -1864,13 +1925,25 @@ static struct notifier_block ts_dmi_notifier = { static int __init ts_dmi_init(void) { const struct dmi_system_id *dmi_id; + struct ts_dmi_data *ts_data_dmi; int error; dmi_id = dmi_first_match(touchscreen_dmi_table); - if (!dmi_id) + ts_data_dmi = dmi_id ? dmi_id->driver_data : NULL; + + if (ts_data) { + /* + * Kernel cmdline provided data takes precedence, copy over + * DMI efi_embedded_fw info if available. + */ + if (ts_data_dmi) + ts_data->embedded_fw = ts_data_dmi->embedded_fw; + } else if (ts_data_dmi) { + ts_data = ts_data_dmi; + } else { return 0; /* Not an error */ + } - ts_data = dmi_id->driver_data; /* Some dmi table entries only provide an efi_embedded_fw_desc */ if (!ts_data->properties) return 0; -- 2.43.0
