Re: [PATCH v3 3/3] Input: novatek-nvt-ts: add support for NT36672A touchscreen

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 6/1/24 2:10 AM, Joel Selvaraj wrote:
> Hi Hans de Goede,
> 
> On 5/27/24 03:42, Hans de Goede wrote:
>> Hi Joel,
>>
>> On 5/27/24 5:26 AM, Joel Selvaraj via B4 Relay wrote:
>>> From: Joel Selvaraj <joelselvaraj.oss@xxxxxxxxx>
>>>
>>> ---
>>>   drivers/input/touchscreen/novatek-nvt-ts.c | 78 +++++++++++++++++++++++++++---
>>>   1 file changed, 72 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/drivers/input/touchscreen/novatek-nvt-ts.c b/drivers/input/touchscreen/novatek-nvt-ts.c
>>> index 224fd112b25a9..7a82a1b09f9d5 100644
>>> --- a/drivers/input/touchscreen/novatek-nvt-ts.c
>>> +++ b/drivers/input/touchscreen/novatek-nvt-ts.c
>>> @@ -139,9 +143,23 @@ static irqreturn_t nvt_ts_irq(int irq, void *dev_id)
>>>       return IRQ_HANDLED;
>>>   }
>>>   +static void nvt_ts_disable_regulators(void *_data)
>>> +{
>>> +    struct nvt_ts_data *data = _data;
>>> +
>>> +    regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators);
>>> +}
>>> +
>>>   static int nvt_ts_start(struct input_dev *dev)
>>>   {
>>>       struct nvt_ts_data *data = input_get_drvdata(dev);
>>> +    int error;
>>> +
>>> +    error = regulator_bulk_enable(ARRAY_SIZE(data->regulators), data->regulators);
>>> +    if (error) {
>>> +        dev_err(&data->client->dev, "failed to enable regulators\n");
>>> +        return error;
>>> +    }
>>>   
>>
>> This is weird, you already enable the regulators in probe() and
>> those get disabled again on remove() by the devm action you add.
>>
>> So there is no need to enable / disable the regulators on start/stop .
>>
>> If you want the regulators to only be enabled when the touchscreen
>> is on then you should disable the regulators again in probe()
>> after the nvt_ts_read_data() call there (and drop the devm action).
> 
> Yes, I want the regulators to be enabled only when the touchscreen is on/active. I will disable the regulators in probe and remove the devm action in v4.

Sounds good.

It is great to see people working on getting mainline
kernels to work on phones like the work you are doing here.
Thank you for doing this work!

Regards,

Hans









[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux