When support for Silead touchscreens was orginal added some touchscreens
with older firmware versions only supported 5 fingers and this was made
the default requiring the setting of a "silead,max-fingers=10" uint32
device-property for all touchscreen models which do support 10 fingers.
There are very few models with the old 5 finger fw, so in practice the
setting of the "silead,max-fingers=10" is boilerplate which needs to
be copy and pasted to every touchscreen config.
Reporting that 10 fingers are supported on devices which only support
5 fingers doesn't cause any problems for userspace in practice, since
at max 4 finger gestures are supported anyways. Drop the max_fingers
configuration and simply always assume 10 fingers.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/input/touchscreen/silead.c | 19 +++++--------------
1 file changed, 5 insertions(+), 14 deletions(-)
diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c
index 62f562ad5026..050fa9ca4ec9 100644
--- a/drivers/input/touchscreen/silead.c
+++ b/drivers/input/touchscreen/silead.c
@@ -71,7 +71,6 @@ struct silead_ts_data {
struct regulator_bulk_data regulators[2];
char fw_name[64];
struct touchscreen_properties prop;
- u32 max_fingers;
u32 chip_id;
struct input_mt_pos pos[SILEAD_MAX_FINGERS];
int slots[SILEAD_MAX_FINGERS];
@@ -136,7 +135,7 @@ static int silead_ts_request_input_dev(struct silead_ts_data *data)
touchscreen_parse_properties(data->input, true, &data->prop);
silead_apply_efi_fw_min_max(data);
- input_mt_init_slots(data->input, data->max_fingers,
+ input_mt_init_slots(data->input, SILEAD_MAX_FINGERS,
INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED |
INPUT_MT_TRACK);
@@ -256,10 +255,10 @@ static void silead_ts_read_data(struct i2c_client *client)
return;
}
- if (buf[0] > data->max_fingers) {
+ if (buf[0] > SILEAD_MAX_FINGERS) {
dev_warn(dev, "More touches reported then supported %d > %d\n",
- buf[0], data->max_fingers);
- buf[0] = data->max_fingers;
+ buf[0], SILEAD_MAX_FINGERS);
+ buf[0] = SILEAD_MAX_FINGERS;
}
if (silead_ts_handle_pen_data(data, buf))
@@ -315,7 +314,6 @@ static void silead_ts_read_data(struct i2c_client *client)
static int silead_ts_init(struct i2c_client *client)
{
- struct silead_ts_data *data = i2c_get_clientdata(client);
int error;
error = i2c_smbus_write_byte_data(client, SILEAD_REG_RESET,
@@ -325,7 +323,7 @@ static int silead_ts_init(struct i2c_client *client)
usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX);
error = i2c_smbus_write_byte_data(client, SILEAD_REG_TOUCH_NR,
- data->max_fingers);
+ SILEAD_MAX_FINGERS);
if (error)
goto i2c_write_err;
usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX);
@@ -591,13 +589,6 @@ static void silead_ts_read_props(struct i2c_client *client)
const char *str;
int error;
- error = device_property_read_u32(dev, "silead,max-fingers",
- &data->max_fingers);
- if (error) {
- dev_dbg(dev, "Max fingers read error %d\n", error);
- data->max_fingers = 5; /* Most devices handle up-to 5 fingers */
- }
-
error = device_property_read_string(dev, "firmware-name", &str);
if (!error)
snprintf(data->fw_name, sizeof(data->fw_name),
--
2.45.1
