The CAN Broadcast Manager now has the capability to dispatch CANFD
frames marked with the id LINBUS_RXOFFLOAD_ID. This patch introduces
functionality to interpret these specific frames, enabling the
configuration of RX offloading within the LIN driver.
Signed-off-by: Christoph Fritz <christoph.fritz@xxxxxxxxx>
---
drivers/net/can/lin.c | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/net/can/lin.c b/drivers/net/can/lin.c
index 95906003666fb..ee2ebea2c865f 100644
--- a/drivers/net/can/lin.c
+++ b/drivers/net/can/lin.c
@@ -194,6 +194,27 @@ static void lin_remove_sysfs_id_files(struct net_device *ndev)
}
}
+static int lin_setup_rxoffload(struct lin_device *ldev,
+ struct canfd_frame *cfd)
+{
+ struct lin_responder_answer answ;
+
+ if (!(cfd->flags & CANFD_FDF))
+ return -EMSGSIZE;
+
+ BUILD_BUG_ON(sizeof(struct lin_responder_answer) > sizeof(cfd->data));
+ memcpy(&answ, cfd->data, sizeof(struct lin_responder_answer));
+
+ answ.lf.checksum_mode = (cfd->can_id & LIN_ENHANCED_CKSUM_FLAG) ?
+ LINBUS_ENHANCED : LINBUS_CLASSIC;
+
+ if (answ.lf.lin_id > LIN_ID_MASK ||
+ answ.event_associated_id > LIN_ID_MASK)
+ return -EINVAL;
+
+ return ldev->ldev_ops->update_responder_answer(ldev, &answ);
+}
+
static void lin_tx_work_handler(struct work_struct *ws)
{
struct lin_device *ldev = container_of(ws, struct lin_device,
@@ -206,6 +227,14 @@ static void lin_tx_work_handler(struct work_struct *ws)
ldev->tx_busy = true;
cfd = (struct canfd_frame *)ldev->tx_skb->data;
+
+ if (cfd->can_id & LIN_RXOFFLOAD_DATA_FLAG) {
+ ret = lin_setup_rxoffload(ldev, cfd);
+ if (ret < 0)
+ netdev_err(ndev, "setting up rx failed %d\n", ret);
+ goto lin_tx_out;
+ }
+
lf.checksum_mode = (cfd->can_id & LIN_ENHANCED_CKSUM_FLAG) ?
LINBUS_ENHANCED : LINBUS_CLASSIC;
lf.lin_id = cfd->can_id & LIN_ID_MASK;
--
2.39.2
