On Thu, 02 May 2024 09:55:28 +0200, Christoph Fritz wrote: > This patch adds dt-bindings for serial LIN bus adapters. These adapters are > basically just LIN transceivers that get hard-wired with serial devices. > > Signed-off-by: Christoph Fritz <christoph.fritz@xxxxxxxxx> > --- > .../bindings/net/can/hexdev,lin-serdev.yaml | 32 +++++++++++++++++++ > 1 file changed, 32 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/can/hexdev,lin-serdev.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/net/can/hexdev,lin-serdev.example.dtb: /example-0/serial/linbus: failed to match any schema with compatible: ['linux,lin-serdev'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240502075534.882628-7-christoph.fritz@xxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
