atkbd serio0: Failed to deactivate keyboard on isa0060/serio0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear Linux folks,


On a Dell XPS 13 9360, Linux “6.9-rc0” still logs errors after

    936e4d49ecbc Input: atkbd - skip ATKBD_CMD_GETID in translated mode
58f65f9db7e0 Input: atkbd - use ab83 as id when skipping the getid command 683cd8259a9b Input: atkbd - skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID 9cf6e24c9fbf Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID

Today the first time during cold boot (which I do not do often), so I noticed it on the console:

[ 0.565863] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [ 0.974053] atkbd serio0: Failed to enable keyboard on isa0060/serio0

Looking through the logs, throughout the 6.8 cycle Linux often logged the line below during resume from ACPI S3.

    atkbd serio0: Failed to deactivate keyboard on isa0060/serio0

In the attached logs it was only logged during the second ACPI S3 suspend/resume cycle.


Kind regards,

Paul
[    0.000000] Linux version 6.8.0+ (build@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc (Debian 13.2.0-16.1) 13.2.0, GNU ld (GNU Binutils for Debian) 2.42) #67 SMP PREEMPT_DYNAMIC Fri Mar 22 16:40:31 CET 2024
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.8.0+ root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer mem_sleep_default=deep log_buf_len=8M cryptomgr.notests
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000556aafff] usable
[    0.000000] BIOS-e820: [mem 0x00000000556ab000-0x00000000556abfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000556ac000-0x00000000556acfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000556ad000-0x0000000064df3fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000064df4000-0x000000006517ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000065180000-0x00000000651c3fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000651c4000-0x000000006f871fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000006f872000-0x000000006fffefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000070000000-0x0000000077ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000078000000-0x00000000785fffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078600000-0x000000007c7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004817fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] e820: update [mem 0x513f1018-0x51401057] usable ==> usable
[    0.000000] e820: update [mem 0x513f1018-0x51401057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000513f1017] usable
[    0.000000] reserve setup_data: [mem 0x00000000513f1018-0x0000000051401057] usable
[    0.000000] reserve setup_data: [mem 0x0000000051401058-0x00000000556aafff] usable
[    0.000000] reserve setup_data: [mem 0x00000000556ab000-0x00000000556abfff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000556ac000-0x00000000556acfff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000556ad000-0x0000000064df3fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000064df4000-0x000000006517ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000065180000-0x00000000651c3fff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000651c4000-0x000000006f871fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000006f872000-0x000000006fffefff] reserved
[    0.000000] reserve setup_data: [mem 0x000000006ffff000-0x000000006fffffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000070000000-0x0000000077ffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000078000000-0x00000000785fffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000078600000-0x000000007c7fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000004817fffff] usable
[    0.000000] efi: EFI v2.4 by American Megatrends
[    0.000000] efi: ACPI=0x6518d000 ACPI 2.0=0x6518d000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 TPMFinalLog=0x6f812000 ESRT=0x6fc86698 MEMATTR=0x62679298 INITRD=0x5577da98 TPMEventLog=0x5577e018 
[    0.000000] efi: Remove mem34: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[    0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
[    0.000000] efi: Not removing mem35: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[    0.000000] efi: Not removing mem36: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem37: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[    0.000000] efi: Remove mem38: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[    0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022
[    0.000000] tsc: Detected 2900.000 MHz processor
[    0.000000] tsc: Detected 2899.886 MHz TSC
[    0.000792] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000794] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000802] last_pfn = 0x481800 max_arch_pfn = 0x400000000
[    0.000805] MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs
[    0.000807] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001117] last_pfn = 0x78600 max_arch_pfn = 0x400000000
[    0.007628] esrt: Reserving ESRT space from 0x000000006fc86698 to 0x000000006fc866d0.
[    0.007633] Using GB pages for direct mapping
[    0.014155] printk: log_buf_len: 8388608 bytes
[    0.014156] printk: early log buf free: 125344(95%)
[    0.014157] Secure boot disabled
[    0.014158] RAMDISK: [mem 0x51402000-0x5271cfff]
[    0.014161] ACPI: Early table checksum verification disabled
[    0.014164] ACPI: RSDP 0x000000006518D000 000024 (v02 DELL  )
[    0.014168] ACPI: XSDT 0x000000006518D0C8 00010C (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.014174] ACPI: FACP 0x00000000651B2A48 00010C (v05 DELL   CBX3     01072009 AMI  00010013)
[    0.014178] ACPI: DSDT 0x000000006518D260 0257E7 (v02 DELL   CBX3     01072009 INTL 20160422)
[    0.014181] ACPI: FACS 0x000000006F86F180 000040
[    0.014183] ACPI: APIC 0x00000000651B2B58 000084 (v03 DELL   CBX3     01072009 AMI  00010013)
[    0.014186] ACPI: FPDT 0x00000000651B2BE0 000044 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.014188] ACPI: FIDT 0x00000000651B2C28 0000AC (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.014191] ACPI: MCFG 0x00000000651B2CD8 00003C (v01 DELL   CBX3     01072009 MSFT 00000097)
[    0.014194] ACPI: HPET 0x00000000651B2D18 000038 (v01 DELL   CBX3     01072009 AMI. 0005000B)
[    0.014196] ACPI: SSDT 0x00000000651B2D50 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[    0.014199] ACPI: BOOT 0x00000000651B30B0 000028 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.014201] ACPI: SSDT 0x00000000651B30D8 0012CF (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.014204] ACPI: HPET 0x00000000651B43A8 000038 (v01 INTEL  KBL-ULT  00000001 MSFT 0000005F)
[    0.014207] ACPI: SSDT 0x00000000651B43E0 000D84 (v02 INTEL  xh_rvp07 00000000 INTL 20160422)
[    0.014209] ACPI: UEFI 0x00000000651B5168 000042 (v01                 00000000      00000000)
[    0.014212] ACPI: SSDT 0x00000000651B51B0 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.014215] ACPI: LPIT 0x00000000651B6090 000094 (v01 INTEL  KBL-ULT  00000000 MSFT 0000005F)
[    0.014217] ACPI: WSMT 0x00000000651B6128 000028 (v01 DELL   CBX3     00000000 MSFT 0000005F)
[    0.014220] ACPI: SSDT 0x00000000651B6150 000161 (v02 INTEL  HdaDsp   00000000 INTL 20160422)
[    0.014222] ACPI: SSDT 0x00000000651B62B8 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
[    0.014225] ACPI: SSDT 0x00000000651B6558 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
[    0.014228] ACPI: SSDT 0x00000000651B9560 0000DB (v02 INTEL  TbtTypeC 00000000 INTL 20160422)
[    0.014230] ACPI: DBGP 0x00000000651B9640 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.014233] ACPI: DBG2 0x00000000651B9678 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.014235] ACPI: SSDT 0x00000000651B96D0 0007DD (v02 INTEL  UsbCTabl 00001000 INTL 20160422)
[    0.014238] ACPI: SSDT 0x00000000651B9EB0 0084F1 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[    0.014241] ACPI: SLIC 0x00000000651C23A8 000176 (v03 DELL   CBX3     01072009 MSFT 00010013)
[    0.014243] ACPI: NHLT 0x00000000651C2520 00002D (v00 INTEL  EDK2     00000002      01000013)
[    0.014246] ACPI: BGRT 0x00000000651C2550 000038 (v00                 01072009 AMI  00010013)
[    0.014249] ACPI: TPM2 0x00000000651C2588 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
[    0.014251] ACPI: ASF! 0x00000000651C25C0 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.014254] ACPI: DMAR 0x00000000651C2660 0000F0 (v01 INTEL  KBL      00000001 INTL 00000001)
[    0.014256] ACPI: Reserving FACP table memory at [mem 0x651b2a48-0x651b2b53]
[    0.014258] ACPI: Reserving DSDT table memory at [mem 0x6518d260-0x651b2a46]
[    0.014258] ACPI: Reserving FACS table memory at [mem 0x6f86f180-0x6f86f1bf]
[    0.014259] ACPI: Reserving APIC table memory at [mem 0x651b2b58-0x651b2bdb]
[    0.014260] ACPI: Reserving FPDT table memory at [mem 0x651b2be0-0x651b2c23]
[    0.014260] ACPI: Reserving FIDT table memory at [mem 0x651b2c28-0x651b2cd3]
[    0.014261] ACPI: Reserving MCFG table memory at [mem 0x651b2cd8-0x651b2d13]
[    0.014262] ACPI: Reserving HPET table memory at [mem 0x651b2d18-0x651b2d4f]
[    0.014263] ACPI: Reserving SSDT table memory at [mem 0x651b2d50-0x651b30a8]
[    0.014263] ACPI: Reserving BOOT table memory at [mem 0x651b30b0-0x651b30d7]
[    0.014264] ACPI: Reserving SSDT table memory at [mem 0x651b30d8-0x651b43a6]
[    0.014265] ACPI: Reserving HPET table memory at [mem 0x651b43a8-0x651b43df]
[    0.014265] ACPI: Reserving SSDT table memory at [mem 0x651b43e0-0x651b5163]
[    0.014266] ACPI: Reserving UEFI table memory at [mem 0x651b5168-0x651b51a9]
[    0.014267] ACPI: Reserving SSDT table memory at [mem 0x651b51b0-0x651b608d]
[    0.014267] ACPI: Reserving LPIT table memory at [mem 0x651b6090-0x651b6123]
[    0.014268] ACPI: Reserving WSMT table memory at [mem 0x651b6128-0x651b614f]
[    0.014269] ACPI: Reserving SSDT table memory at [mem 0x651b6150-0x651b62b0]
[    0.014269] ACPI: Reserving SSDT table memory at [mem 0x651b62b8-0x651b6556]
[    0.014270] ACPI: Reserving SSDT table memory at [mem 0x651b6558-0x651b9559]
[    0.014271] ACPI: Reserving SSDT table memory at [mem 0x651b9560-0x651b963a]
[    0.014271] ACPI: Reserving DBGP table memory at [mem 0x651b9640-0x651b9673]
[    0.014272] ACPI: Reserving DBG2 table memory at [mem 0x651b9678-0x651b96cb]
[    0.014273] ACPI: Reserving SSDT table memory at [mem 0x651b96d0-0x651b9eac]
[    0.014274] ACPI: Reserving SSDT table memory at [mem 0x651b9eb0-0x651c23a0]
[    0.014274] ACPI: Reserving SLIC table memory at [mem 0x651c23a8-0x651c251d]
[    0.014275] ACPI: Reserving NHLT table memory at [mem 0x651c2520-0x651c254c]
[    0.014276] ACPI: Reserving BGRT table memory at [mem 0x651c2550-0x651c2587]
[    0.014276] ACPI: Reserving TPM2 table memory at [mem 0x651c2588-0x651c25bb]
[    0.014277] ACPI: Reserving ASF! table memory at [mem 0x651c25c0-0x651c265f]
[    0.014278] ACPI: Reserving DMAR table memory at [mem 0x651c2660-0x651c274f]
[    0.014404] No NUMA configuration found
[    0.014405] Faking a node at [mem 0x0000000000000000-0x00000004817fffff]
[    0.014412] NODE_DATA(0) allocated [mem 0x47f3d3000-0x47f3fdfff]
[    0.014557] Zone ranges:
[    0.014557]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.014559]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.014560]   Normal   [mem 0x0000000100000000-0x00000004817fffff]
[    0.014562]   Device   empty
[    0.014562] Movable zone start for each node
[    0.014565] Early memory node ranges
[    0.014565]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.014566]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.014567]   node   0: [mem 0x0000000000100000-0x00000000556aafff]
[    0.014568]   node   0: [mem 0x00000000556ad000-0x0000000064df3fff]
[    0.014569]   node   0: [mem 0x000000006ffff000-0x000000006fffffff]
[    0.014570]   node   0: [mem 0x0000000078000000-0x00000000785fffff]
[    0.014570]   node   0: [mem 0x0000000100000000-0x00000004817fffff]
[    0.014572] Initmem setup node 0 [mem 0x0000000000001000-0x00000004817fffff]
[    0.014576] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.014578] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.014609] On node 0, zone DMA: 98 pages in unavailable ranges
[    0.016952] On node 0, zone DMA32: 2 pages in unavailable ranges
[    0.017391] On node 0, zone DMA32: 45579 pages in unavailable ranges
[    0.017916] On node 0, zone Normal: 31232 pages in unavailable ranges
[    0.018174] On node 0, zone Normal: 26624 pages in unavailable ranges
[    0.018182] Reserving Intel graphics memory at [mem 0x7a800000-0x7c7fffff]
[    0.018373] ACPI: PM-Timer IO Port: 0x1808
[    0.018379] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.018381] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.018381] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.018382] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.018408] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.018411] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.018412] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.018416] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.018417] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.018422] e820: update [mem 0x62260000-0x623ecfff] usable ==> reserved
[    0.018432] TSC deadline timer available
[    0.018436] CPU topo: Max. logical packages:   1
[    0.018437] CPU topo: Max. logical dies:       1
[    0.018437] CPU topo: Max. dies per package:   1
[    0.018441] CPU topo: Max. threads per core:   2
[    0.018442] CPU topo: Num. cores per package:     2
[    0.018443] CPU topo: Num. threads per package:   4
[    0.018443] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.018457] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.018459] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.018460] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[    0.018462] PM: hibernation: Registered nosave memory: [mem 0x513f1000-0x513f1fff]
[    0.018463] PM: hibernation: Registered nosave memory: [mem 0x51401000-0x51401fff]
[    0.018464] PM: hibernation: Registered nosave memory: [mem 0x556ab000-0x556abfff]
[    0.018465] PM: hibernation: Registered nosave memory: [mem 0x556ac000-0x556acfff]
[    0.018466] PM: hibernation: Registered nosave memory: [mem 0x62260000-0x623ecfff]
[    0.018468] PM: hibernation: Registered nosave memory: [mem 0x64df4000-0x6517ffff]
[    0.018468] PM: hibernation: Registered nosave memory: [mem 0x65180000-0x651c3fff]
[    0.018469] PM: hibernation: Registered nosave memory: [mem 0x651c4000-0x6f871fff]
[    0.018469] PM: hibernation: Registered nosave memory: [mem 0x6f872000-0x6fffefff]
[    0.018471] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x77ffffff]
[    0.018472] PM: hibernation: Registered nosave memory: [mem 0x78600000-0x7c7fffff]
[    0.018473] PM: hibernation: Registered nosave memory: [mem 0x7c800000-0xfdffffff]
[    0.018474] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.018474] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.018475] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.018475] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.018477] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.018478] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[    0.018481] [mem 0x7c800000-0xfdffffff] available for PCI devices
[    0.018482] Booting paravirtualized kernel on bare hardware
[    0.018484] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.023259] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.023555] percpu: Embedded 65 pages/cpu s229376 r8192 d28672 u524288
[    0.023560] pcpu-alloc: s229376 r8192 d28672 u524288 alloc=1*2097152
[    0.023562] pcpu-alloc: [0] 0 1 2 3 
[    0.023578] Kernel command line: BOOT_IMAGE=/vmlinuz-6.8.0+ root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer mem_sleep_default=deep log_buf_len=8M cryptomgr.notests
[    0.023646] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.8.0+", will be passed to user space.
[    0.023680] random: crng init done
[    0.025176] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.025936] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.025996] Fallback order for Node 0: 0 
[    0.025999] Built 1 zonelists, mobility grouping on.  Total pages: 4026691
[    0.026000] Policy zone: Normal
[    0.026004] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.026012] software IO TLB: area num 4.
[    0.044060] Memory: 1618196K/16363068K available (16384K kernel code, 2385K rwdata, 6028K rodata, 4032K init, 5548K bss, 496724K reserved, 0K cma-reserved)
[    0.044242] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.044258] Kernel/User page tables isolation: enabled
[    0.044291] ftrace: allocating 43302 entries in 170 pages
[    0.051448] ftrace: allocated 170 pages with 4 groups
[    0.052069] Dynamic Preempt: voluntary
[    0.052100] rcu: Preemptible hierarchical RCU implementation.
[    0.052100] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.052102] 	Trampoline variant of Tasks RCU enabled.
[    0.052102] 	Rude variant of Tasks RCU enabled.
[    0.052102] 	Tracing variant of Tasks RCU enabled.
[    0.052103] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.052104] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.052108] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.052110] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.052111] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.054635] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[    0.054839] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.054999] Console: colour dummy device 80x25
[    0.055002] printk: legacy console [tty0] enabled
[    0.055036] ACPI: Core revision 20230628
[    0.055182] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.055183] APIC: Switch to symmetric I/O mode setup
[    0.055185] DMAR: Host address width 39
[    0.055186] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.055191] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.055193] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.055197] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.055199] DMAR: RMRR base: 0x00000064ec2000 end: 0x00000064ee1fff
[    0.055201] DMAR: RMRR base: 0x0000007a000000 end: 0x0000007c7fffff
[    0.055202] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[    0.055203] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[    0.055204] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.055206] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.055207] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.056834] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.056836] x2apic enabled
[    0.056893] APIC: Switched APIC routing to: cluster x2apic
[    0.060818] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29ccd767b87, max_idle_ns: 440795223720 ns
[    0.060823] Calibrating delay loop (skipped), value calculated using timer frequency.. 5799.77 BogoMIPS (lpj=11599544)
[    0.060853] CPU0: Thermal monitoring enabled (TM1)
[    0.060887] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.060888] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.060892] process: using mwait in idle threads
[    0.060893] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.060895] Spectre V2 : Mitigation: IBRS
[    0.060896] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.060897] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.060898] RETBleed: Mitigation: IBRS
[    0.060900] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.060901] Spectre V2 : User space: Mitigation: STIBP via prctl
[    0.060902] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.060910] MDS: Mitigation: Clear CPU buffers
[    0.060911] MMIO Stale Data: Mitigation: Clear CPU buffers
[    0.060915] SRBDS: Mitigation: Microcode
[    0.060921] GDS: Mitigation: Microcode
[    0.060926] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.060928] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.060929] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.060930] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.060931] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.060932] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.060934] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.060935] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.060936] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.064821] Freeing SMP alternatives memory: 36K
[    0.064821] pid_max: default: 32768 minimum: 301
[    0.064821] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,ima,evm
[    0.064821] landlock: Up and running.
[    0.064821] Yama: becoming mindful.
[    0.064821] AppArmor: AppArmor initialized
[    0.064821] TOMOYO Linux initialized
[    0.064821] LSM support for eBPF active
[    0.064821] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.064821] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.064821] smpboot: CPU0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[    0.064821] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.064821] ... version:                4
[    0.064821] ... bit width:              48
[    0.064821] ... generic registers:      4
[    0.064821] ... value mask:             0000ffffffffffff
[    0.064821] ... max period:             00007fffffffffff
[    0.064821] ... fixed-purpose events:   3
[    0.064821] ... event mask:             000000070000000f
[    0.064821] signal: max sigframe size: 2032
[    0.064821] Estimated ratio of average max frequency by base frequency (times 1024): 1235
[    0.064821] rcu: Hierarchical SRCU implementation.
[    0.064821] rcu: 	Max phase no-delay instances is 1000.
[    0.064821] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.064821] smp: Bringing up secondary CPUs ...
[    0.064821] smpboot: x86: Booting SMP configuration:
[    0.064821] .... node  #0, CPUs:      #1 #2 #3
[    0.064821] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.064821] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[    0.064821] smp: Brought up 1 node, 4 CPUs
[    0.064821] smpboot: Total of 4 processors activated (23199.08 BogoMIPS)
[    0.084849] node 0 deferred pages initialised in 20ms
[    0.085803] devtmpfs: initialized
[    0.085803] x86/mm: Memory block size: 128MB
[    0.086169] ACPI: PM: Registering ACPI NVS region [mem 0x556ab000-0x556abfff] (4096 bytes)
[    0.086169] ACPI: PM: Registering ACPI NVS region [mem 0x651c4000-0x6f871fff] (174776320 bytes)
[    0.090220] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.090228] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.090282] pinctrl core: initialized pinctrl subsystem
[    0.090740] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.090963] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.091084] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.091202] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.091222] audit: initializing netlink subsys (disabled)
[    0.091238] audit: type=2000 audit(1711173480.028:1): state=initialized audit_enabled=0 res=1
[    0.091238] thermal_sys: Registered thermal governor 'fair_share'
[    0.091238] thermal_sys: Registered thermal governor 'bang_bang'
[    0.091238] thermal_sys: Registered thermal governor 'step_wise'
[    0.091238] thermal_sys: Registered thermal governor 'user_space'
[    0.091238] thermal_sys: Registered thermal governor 'power_allocator'
[    0.091238] cpuidle: using governor ladder
[    0.091238] cpuidle: using governor menu
[    0.091238] Simple Boot Flag at 0x47 set to 0x80
[    0.091238] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.091238] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.091238] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[    0.091238] PCI: not using ECAM ([mem 0xe0000000-0xefffffff] not reserved)
[    0.091238] PCI: Using configuration type 1 for base access
[    0.091238] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.091238] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.091238] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.091238] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.091238] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.091238] Demotion targets for Node 0: null
[    0.091238] ACPI: Added _OSI(Module Device)
[    0.091238] ACPI: Added _OSI(Processor Device)
[    0.091238] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.091238] ACPI: Added _OSI(Processor Aggregator Device)
[    0.131871] ACPI: 11 ACPI AML tables successfully acquired and loaded
[    0.138778] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.144827] ACPI: Dynamic OEM Table Load:
[    0.144834] ACPI: SSDT 0xFFFF939B012C7400 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.146177] ACPI: Dynamic OEM Table Load:
[    0.146182] ACPI: SSDT 0xFFFF939B01B58000 0006F6 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.148284] ACPI: Dynamic OEM Table Load:
[    0.148289] ACPI: SSDT 0xFFFF939B01B5B000 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.149928] ACPI: Dynamic OEM Table Load:
[    0.149932] ACPI: SSDT 0xFFFF939B010B8400 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.152979] ACPI: _OSC evaluated successfully for all CPUs
[    0.153164] ACPI: EC: EC started
[    0.153165] ACPI: EC: interrupt blocked
[    0.158912] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.158915] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[    0.158916] ACPI: Interpreter enabled
[    0.158953] ACPI: PM: (supports S0 S3 S4 S5)
[    0.158961] ACPI: Using IOAPIC for interrupt routing
[    0.158996] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[    0.159924] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource
[    0.159933] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.159935] PCI: Using E820 reservations for host bridge windows
[    0.160578] ACPI: Enabled 8 GPEs in block 00 to 7F
[    0.164575] ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource
[    0.164914] ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource
[    0.165235] ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource
[    0.165554] ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource
[    0.165874] ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource
[    0.166197] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource
[    0.167022] ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource
[    0.167344] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource
[    0.167667] ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource
[    0.167986] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource
[    0.168305] ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource
[    0.168624] ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource
[    0.168947] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource
[    0.169276] ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource
[    0.169598] ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource
[    0.169917] ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource
[    0.170236] ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource
[    0.171586] ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource
[    0.171906] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource
[    0.172225] ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource
[    0.195606] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.195613] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.195811] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[    0.196182] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR]
[    0.196184] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.197146] PCI host bridge to bus 0000:00
[    0.197148] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.197150] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.197152] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    0.197154] pci_bus 0000:00: root bus resource [mem 0x7c800000-0xdfffffff window]
[    0.197155] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.197157] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.197173] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000 conventional PCI endpoint
[    0.197247] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
[    0.197254] pci 0000:00:02.0: BAR 0 [mem 0xdb000000-0xdbffffff 64bit]
[    0.197259] pci 0000:00:02.0: BAR 2 [mem 0x90000000-0x9fffffff 64bit pref]
[    0.197263] pci 0000:00:02.0: BAR 4 [io  0xf000-0xf03f]
[    0.197277] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.197433] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 conventional PCI endpoint
[    0.197441] pci 0000:00:04.0: BAR 0 [mem 0xdc320000-0xdc327fff 64bit]
[    0.197723] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 conventional PCI endpoint
[    0.197740] pci 0000:00:14.0: BAR 0 [mem 0xdc310000-0xdc31ffff 64bit]
[    0.197799] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.198345] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 conventional PCI endpoint
[    0.198360] pci 0000:00:14.2: BAR 0 [mem 0xdc334000-0xdc334fff 64bit]
[    0.198500] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 conventional PCI endpoint
[    0.198531] pci 0000:00:15.0: BAR 0 [mem 0xdc333000-0xdc333fff 64bit]
[    0.198876] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 conventional PCI endpoint
[    0.198921] pci 0000:00:15.1: BAR 0 [mem 0xdc332000-0xdc332fff 64bit]
[    0.199293] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 conventional PCI endpoint
[    0.199307] pci 0000:00:16.0: BAR 0 [mem 0xdc331000-0xdc331fff 64bit]
[    0.199351] pci 0000:00:16.0: PME# supported from D3hot
[    0.199681] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 PCIe Root Port
[    0.199702] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[    0.199707] pci 0000:00:1c.0:   bridge window [mem 0xc4000000-0xda0fffff]
[    0.199714] pci 0000:00:1c.0:   bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[    0.199765] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.200258] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400 PCIe Root Port
[    0.200280] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[    0.200284] pci 0000:00:1c.4:   bridge window [mem 0xdc000000-0xdc1fffff]
[    0.200342] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.200839] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400 PCIe Root Port
[    0.200858] pci 0000:00:1d.0: PCI bridge to [bus 3b]
[    0.200862] pci 0000:00:1d.0:   bridge window [mem 0xdc200000-0xdc2fffff]
[    0.200912] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.201423] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100 conventional PCI endpoint
[    0.201736] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 conventional PCI endpoint
[    0.201748] pci 0000:00:1f.2: BAR 0 [mem 0xdc32c000-0xdc32ffff]
[    0.201981] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380 conventional PCI endpoint
[    0.202001] pci 0000:00:1f.3: BAR 0 [mem 0xdc328000-0xdc32bfff 64bit]
[    0.202025] pci 0000:00:1f.3: BAR 4 [mem 0xdc300000-0xdc30ffff 64bit]
[    0.202066] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.202669] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 conventional PCI endpoint
[    0.202728] pci 0000:00:1f.4: BAR 0 [mem 0xdc330000-0xdc3300ff 64bit]
[    0.202799] pci 0000:00:1f.4: BAR 4 [io  0xf040-0xf05f]
[    0.203151] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[    0.203599] pci 0000:3a:00.0: [168c:003e] type 00 class 0x028000 PCIe Endpoint
[    0.203818] pci 0000:3a:00.0: BAR 0 [mem 0xdc000000-0xdc1fffff 64bit]
[    0.204933] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold
[    0.206668] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[    0.206769] pci 0000:3b:00.0: [1c5c:1284] type 00 class 0x010802 PCIe Endpoint
[    0.206789] pci 0000:3b:00.0: BAR 0 [mem 0xdc200000-0xdc203fff 64bit]
[    0.206901] pci 0000:3b:00.0: PME# supported from D0 D1 D3hot
[    0.207282] pci 0000:00:1d.0: PCI bridge to [bus 3b]
[    0.210342] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[    0.210342] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.210342] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.210342] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.210342] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[    0.210342] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[    0.210342] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.210342] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.223794] ACPI: EC: interrupt unblocked
[    0.223796] ACPI: EC: event unblocked
[    0.223801] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.223803] ACPI: EC: GPE=0x14
[    0.223804] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
[    0.223806] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
[    0.223882] iommu: Default domain type: Translated
[    0.223882] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.223882] pps_core: LinuxPPS API ver. 1 registered
[    0.223882] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[    0.223882] PTP clock support registered
[    0.223882] EDAC MC: Ver: 3.0.0
[    0.223882] efivars: Registered efivars operations
[    0.223882] NetLabel: Initializing
[    0.223882] NetLabel:  domain hash size = 128
[    0.223882] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.223882] NetLabel:  unlabeled traffic allowed by default
[    0.223882] PCI: Using ACPI for IRQ routing
[    0.247397] PCI: pci_cache_line_size set to 64 bytes
[    0.247773] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.247775] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.247776] e820: reserve RAM buffer [mem 0x513f1018-0x53ffffff]
[    0.247777] e820: reserve RAM buffer [mem 0x556ab000-0x57ffffff]
[    0.247778] e820: reserve RAM buffer [mem 0x62260000-0x63ffffff]
[    0.247779] e820: reserve RAM buffer [mem 0x64df4000-0x67ffffff]
[    0.247780] e820: reserve RAM buffer [mem 0x78600000-0x7bffffff]
[    0.247781] e820: reserve RAM buffer [mem 0x481800000-0x483ffffff]
[    0.248830] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.248830] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.248831] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.248834] vgaarb: loaded
[    0.248887] clocksource: Switched to clocksource tsc-early
[    0.249461] VFS: Disk quotas dquot_6.6.0
[    0.249478] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.249614] AppArmor: AppArmor Filesystem Enabled
[    0.249626] pnp: PnP ACPI init
[    0.249802] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.249805] system 00:00: [io  0xffff] has been reserved
[    0.249807] system 00:00: [io  0xffff] has been reserved
[    0.249808] system 00:00: [io  0xffff] has been reserved
[    0.249810] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.249811] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.249956] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.250377] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.250380] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.250382] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.250383] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.250385] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.250387] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.250388] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.250390] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.250392] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.250393] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[    0.250433] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.250435] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.250437] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.250438] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.250440] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.250441] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.250443] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.250728] system 00:07: [io  0xff00-0xfffe] has been reserved
[    0.251890] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[    0.251893] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[    0.255665] pnp: PnP ACPI: found 9 devices
[    0.261489] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.261533] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000 conventional PCI endpoint
[    0.261592] pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit]
[    0.261874] NET: Registered PF_INET protocol family
[    0.261994] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.264282] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.264307] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.264368] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.264545] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.264742] TCP: Hash tables configured (established 131072 bind 65536)
[    0.264819] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.264859] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.264891] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.264951] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.264956] NET: Registered PF_XDP protocol family
[    0.264964] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01-39] add_size 1000
[    0.264974] pci 0000:00:1c.0: bridge window [io  0x2000-0x2fff]: assigned
[    0.264977] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[    0.264979] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.264983] pci 0000:00:1c.0:   bridge window [mem 0xc4000000-0xda0fffff]
[    0.264986] pci 0000:00:1c.0:   bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[    0.264990] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[    0.264994] pci 0000:00:1c.4:   bridge window [mem 0xdc000000-0xdc1fffff]
[    0.265000] pci 0000:00:1d.0: PCI bridge to [bus 3b]
[    0.265002] pci 0000:00:1d.0:   bridge window [mem 0xdc200000-0xdc2fffff]
[    0.265008] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.265010] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.265011] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
[    0.265012] pci_bus 0000:00: resource 7 [mem 0x7c800000-0xdfffffff window]
[    0.265014] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.265015] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.265016] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff]
[    0.265017] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
[    0.265019] pci_bus 0000:3a: resource 1 [mem 0xdc000000-0xdc1fffff]
[    0.265021] pci_bus 0000:3b: resource 1 [mem 0xdc200000-0xdc2fffff]
[    0.265662] PCI: CLS 0 bytes, default 64
[    0.265673] DMAR: ACPI device "device:79" under DMAR at fed91000 as 00:15.0
[    0.265677] DMAR: ACPI device "device:7a" under DMAR at fed91000 as 00:15.1
[    0.265685] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.265686] software IO TLB: mapped [mem 0x000000005e260000-0x0000000062260000] (64MB)
[    0.265719] Unpacking initramfs...
[    0.265745] sgx: EPC section 0x70200000-0x75f7ffff
[    0.266605] Initialise system trusted keyrings
[    0.266617] Key type blacklist registered
[    0.266698] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    0.266723] zbud: loaded
[    0.266915] fuse: init (API version 7.40)
[    0.267203] integrity: Platform Keyring initialized
[    0.267211] integrity: Machine keyring initialized
[    0.267215] Key type asymmetric registered
[    0.267218] Asymmetric key parser 'x509' registered
[    0.295920] Freeing initrd memory: 19564K
[    0.299316] alg: self-tests disabled
[    0.299386] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.299414] io scheduler mq-deadline registered
[    0.300481] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.302622] thermal LNXTHERM:00: registered as thermal_zone0
[    0.302624] ACPI: thermal: Thermal Zone [THM] (25 C)
[    0.302778] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.303402] hpet_acpi_add: no address or irqs in _CRS
[    0.315800] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 4)
[    0.355599] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.355970] i8042: Warning: Keylock active
[    0.357750] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.357755] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.357849] mousedev: PS/2 mouse device common for all mice
[    0.357873] rtc_cmos 00:01: RTC can wake from S4
[    0.358596] rtc_cmos 00:01: registered as rtc0
[    0.358728] rtc_cmos 00:01: setting system clock to 2024-03-23T05:58:00 UTC (1711173480)
[    0.358752] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[    0.358850] intel_pstate: Intel P-state driver initializing
[    0.358979] intel_pstate: HWP enabled
[    0.359001] ledtrig-cpu: registered to indicate activity on CPUs
[    0.359290] efifb: probing for efifb
[    0.359302] efifb: framebuffer at 0x90000000, using 22500k, total 22500k
[    0.359304] efifb: mode is 3200x1800x32, linelength=12800, pages=1
[    0.359306] efifb: scrolling: redraw
[    0.359306] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.359383] Console: switching to colour frame buffer device 200x56
[    0.363275] fb0: EFI VGA frame buffer device
[    0.363450] NET: Registered PF_INET6 protocol family
[    0.367532] Segment Routing with IPv6
[    0.367546] In-situ OAM (IOAM) with IPv6
[    0.367571] mip6: Mobile IPv6
[    0.367576] NET: Registered PF_PACKET protocol family
[    0.367637] mpls_gso: MPLS GSO support
[    0.367967] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.368080] microcode: Current revision: 0x000000f4
[    0.368083] microcode: Updated early from: 0x000000f0
[    0.368229] IPI shorthand broadcast: enabled
[    0.369467] sched_clock: Marking stable (362355159, 5855388)->(403861059, -35650512)
[    0.369600] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.369703] registered taskstats version 1
[    0.369733] Loading compiled-in X.509 certificates
[    0.370356] Loaded X.509 cert 'Build time autogenerated kernel key: d47c33c70b7d8c925a93309ef39ed6f8acab6016'
[    0.372133] Key type .fscrypt registered
[    0.372135] Key type fscrypt-provisioning registered
[    0.377659] cryptd: module verification failed: signature and/or required key missing - tainting kernel
[    0.378226] cryptd: max_cpu_qlen set to 1000
[    0.379431] AVX2 version of gcm_enc/dec engaged.
[    0.379472] AES CTR mode by8 optimization enabled
[    0.393421] Key type encrypted registered
[    0.393427] AppArmor: AppArmor sha256 policy hashing enabled
[    0.393674] integrity: Loading X.509 certificate: UEFI:db
[    0.393703] integrity: Loaded X.509 cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7'
[    0.393704] integrity: Loading X.509 certificate: UEFI:db
[    0.393725] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.393727] integrity: Loading X.509 certificate: UEFI:db
[    0.393743] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.394088] ima: Allocated hash algorithm: sha256
[    0.435231] ima: No architecture policies found
[    0.435255] evm: Initialising EVM extended attributes:
[    0.435256] evm: security.selinux
[    0.435258] evm: security.SMACK64 (disabled)
[    0.435259] evm: security.SMACK64EXEC (disabled)
[    0.435261] evm: security.SMACK64TRANSMUTE (disabled)
[    0.435262] evm: security.SMACK64MMAP (disabled)
[    0.435263] evm: security.apparmor
[    0.435264] evm: security.ima
[    0.435265] evm: security.capability
[    0.435267] evm: HMAC attrs: 0x1
[    0.436779] RAS: Correctable Errors collector initialized.
[    0.436831] clk: Disabling unused clocks
[    0.438122] Freeing unused decrypted memory: 2036K
[    0.438767] Freeing unused kernel image (initmem) memory: 4032K
[    0.438858] Write protecting the kernel read-only data: 22528k
[    0.439224] Freeing unused kernel image (rodata/data gap) memory: 116K
[    0.499027] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.499030] x86/mm: Checking user space page tables
[    0.540595] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.540600] Run /init as init process
[    0.540601]   with arguments:
[    0.540603]     /init
[    0.540604]   with environment:
[    0.540604]     HOME=/
[    0.540605]     TERM=linux
[    0.540606]     BOOT_IMAGE=/vmlinuz-6.8.0+
[    0.565863] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[    0.667066] hid: raw HID events driver (C) Jiri Kosina
[    0.667941] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    0.671185] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    0.681464] ACPI: bus type USB registered
[    0.681503] usbcore: registered new interface driver usbfs
[    0.681513] usbcore: registered new interface driver hub
[    0.681526] usbcore: registered new device driver usb
[    0.690303] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[    0.690581] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    0.705926] ACPI: bus type drm_connector registered
[    0.706055] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    0.706082] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    0.719661] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.719671] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.720737] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[    0.721202] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.721207] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.721211] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    0.721265] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
[    0.721267] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.721269] usb usb1: Product: xHCI Host Controller
[    0.721270] usb usb1: Manufacturer: Linux 6.8.0+ xhci-hcd
[    0.721271] usb usb1: SerialNumber: 0000:00:14.0
[    0.721549] hub 1-0:1.0: USB hub found
[    0.721571] hub 1-0:1.0: 12 ports detected
[    0.723869] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08
[    0.723872] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.723874] usb usb2: Product: xHCI Host Controller
[    0.723876] usb usb2: Manufacturer: Linux 6.8.0+ xhci-hcd
[    0.723877] usb usb2: SerialNumber: 0000:00:14.0
[    0.723977] hub 2-0:1.0: USB hub found
[    0.723992] hub 2-0:1.0: 6 ports detected
[    0.883527] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input1
[    0.883775] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input2
[    0.883950] hid-generic 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
[    0.893404] nvme nvme0: pci function 0000:3b:00.0
[    0.911085] nvme nvme0: 4/0/0 default/read/poll queues
[    0.917526]  nvme0n1: p1 p2 p3 p4
[    0.974053] atkbd serio0: Failed to enable keyboard on isa0060/serio0
[    0.974439] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.986070] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[    1.136681] usb 1-3: New USB device found, idVendor=0cf3, idProduct=e300, bcdDevice= 0.01
[    1.136699] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.365290] tsc: Refined TSC clocksource calibration: 2904.000 MHz
[    1.365296] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc05e54fc, max_idle_ns: 440795291716 ns
[    1.365319] clocksource: Switched to clocksource tsc
[    1.422161] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[    1.566634] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[    1.572324] usb 1-4: New USB device found, idVendor=04f3, idProduct=2234, bcdDevice=11.11
[    1.572341] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[    1.572349] usb 1-4: Product: Touchscreen
[    1.572355] usb 1-4: Manufacturer: ELAN
[    1.702112] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[    1.911293] usb 1-5: New USB device found, idVendor=0c45, idProduct=670c, bcdDevice=56.26
[    1.911311] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    1.911318] usb 1-5: Product: Integrated_Webcam_HD
[    1.911324] usb 1-5: Manufacturer: CN09GTFMLOG008C8B7FWA01
[    1.942280] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input5
[    1.942581] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input6
[    1.942666] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input7
[    1.942878] hid-generic 0003:04F3:2234.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[    1.942907] usbcore: registered new interface driver usbhid
[    1.942908] usbhid: USB HID core driver
[    1.959227] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    1.959255] device-mapper: uevent: version 1.0.3
[    1.959345] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@xxxxxxxxxxxxxxx
[   40.435988] PM: Image not found (code -22)
[   40.572313] EXT4-fs (dm-0): mounted filesystem 32e29882-d94d-4a92-9ee4-4d03002bfa29 ro with ordered data mode. Quota mode: none.
[   40.595777] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[   40.689819] systemd[1]: Inserted module 'autofs4'
[   40.737225] systemd[1]: systemd 255.4-1+b1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[   40.737270] systemd[1]: Detected architecture x86-64.
[   40.739359] systemd[1]: Hostname set to <abreu>.
[   40.960254] systemd[1]: Queued start job for default target graphical.target.
[   40.995043] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[   40.996040] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[   40.996311] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice - Encrypted Volume Units Service Slice.
[   40.996577] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[   40.996785] systemd[1]: Created slice user.slice - User and Session Slice.
[   40.996854] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[   40.996902] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[   40.997063] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[   40.997083] systemd[1]: Expecting device dev-disk-by\x2ddiskseq-1\x2dpart4.device - /dev/disk/by-diskseq/1-part4...
[   40.997089] systemd[1]: Expecting device dev-disk-by\x2duuid-2d23fd4c\x2d5d03\x2d4e1a\x2d8a42\x2d0e859d1f00d8.device - /dev/disk/by-uuid/2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8...
[   40.997095] systemd[1]: Expecting device dev-disk-by\x2duuid-61be8f50\x2d69c5\x2d49a5\x2dbcad\x2d3f4521e9c7b5.device - /dev/disk/by-uuid/61be8f50-69c5-49a5-bcad-3f4521e9c7b5...
[   40.997100] systemd[1]: Expecting device dev-disk-by\x2duuid-96BD\x2d5653.device - /dev/disk/by-uuid/96BD-5653...
[   40.997115] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[   40.997133] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[   40.997142] systemd[1]: Reached target paths.target - Path Units.
[   40.997155] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[   40.997163] systemd[1]: Reached target slices.target - Slice Units.
[   40.997191] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[   40.998377] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
[   40.998469] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[   40.998525] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[   40.998642] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[   40.998761] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[   40.998797] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   40.999088] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[   40.999180] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[   41.000243] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[   41.001200] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[   41.002284] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[   41.006055] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[   41.007858] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[   41.011513] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[   41.014621] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[   41.017300] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[   41.024909] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[   41.026298] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[   41.028137] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[   41.028274] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[   41.031103] systemd[1]: Starting systemd-journald.service - Journal Service...
[   41.033147] pstore: Using crash dump compression: deflate
[   41.037625] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[   41.037659] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   41.040154] pstore: Registered efi_pstore as persistent store backend
[   41.040420] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[   41.040487] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   41.046169] loop: module loaded
[   41.046747] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[   41.049145] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[   41.049315] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[   41.049437] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[   41.049544] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[   41.049806] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[   41.050298] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[   41.050465] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[   41.050818] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[   41.050988] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[   41.051310] systemd[1]: modprobe@drm.service: Deactivated successfully.
[   41.051464] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[   41.051791] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[   41.051945] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[   41.052381] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[   41.052566] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[   41.052955] systemd[1]: modprobe@loop.service: Deactivated successfully.
[   41.053121] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[   41.058044] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[   41.060809] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[   41.060892] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[   41.062260] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[   41.064636] systemd-journald[481]: Collecting audit messages is disabled.
[   41.066091] lp: driver loaded but no devices found
[   41.066581] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[   41.070140] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[   41.072785] ppdev: user-space parallel port driver
[   41.087469] EXT4-fs (dm-0): re-mounted 32e29882-d94d-4a92-9ee4-4d03002bfa29 r/w. Quota mode: none.
[   41.088807] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[   41.089685] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[   41.089750] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[   41.118142] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[   41.118169] systemd[1]: systemd-tpm2-setup.service - TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[   41.118454] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[   41.118713] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully.
[   41.118842] systemd[1]: Started systemd-journald.service - Journal Service.
[   41.140672] systemd-journald[481]: Received client request to flush runtime journal.
[   41.157132] systemd-journald[481]: /var/log/journal/16ae67b9dca94ecebbc8ec78ab24e074/system.journal: Journal file uses a different sequence number ID, rotating.
[   41.157141] systemd-journald[481]: Rotating system journal.
[   41.322665] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input9
[   41.339612] ACPI: button: Lid Switch [LID0]
[   41.339693] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input10
[   41.340214] ACPI: AC: AC Adapter [AC] (off-line)
[   41.371558] input: Intel HID events as /devices/platform/INT33D5:00/input/input11
[   41.385792] Consider using thermal netlink events interface
[   41.386730] wmi_bus wmi_bus-PNP0C14:01: [Firmware Bug]: WQBC data block query control method not found
[   41.388444] input: Intel Virtual Buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input12
[   41.398225] ACPI: button: Power Button [PBTN]
[   41.398288] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input14
[   41.398365] ACPI: button: Sleep Button [SBTN]
[   41.398429] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input15
[   41.400091] intel-hid INT33D5:00: platform supports 5 button array
[   41.400136] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input16
[   41.420546] ACPI: battery: Slot [BAT0] (battery present)
[   41.464333] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[   41.466803] Adding 8387904k swap on /dev/nvme0n1p4.  Priority:-2 extents:1 across:8387904k SS
[   41.489617] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input17
[   41.489674] ACPI: button: Power Button [PWRF]
[   41.489946] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input18
[   41.494070] hid-multitouch 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
[   41.498735] intel_pmc_core INT33A1:00:  initialized
[   41.610730] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input20
[   41.613547] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input21
[   41.614214] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input22
[   41.618511] hid-multitouch 0003:04F3:2234.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[   41.957130] input: PC Speaker as /devices/platform/pcspkr/input/input24
[   41.960182] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[   42.047297] intel_rapl_common: Found RAPL domain package
[   42.047314] intel_rapl_common: Found RAPL domain dram
[   42.100476] mc: Linux media interface: v0.10
[   42.106634] iTCO_vendor_support: vendor-support=0
[   42.123640] EXT4-fs (nvme0n1p2): mounted filesystem 2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8 r/w with ordered data mode. Quota mode: none.
[   42.128691] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[   42.132940] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   42.175774] videodev: Linux video capture interface: v2.00
[   42.213648] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input25
[   42.269932] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[   42.269936] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   42.269937] RAPL PMU: hw unit of domain package 2^-14 Joules
[   42.269938] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   42.269939] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   42.269940] RAPL PMU: hw unit of domain psys 2^-14 Joules
[   42.276964] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   42.277206] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   42.280286] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   42.282807] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[   42.309098] intel_rapl_common: Found RAPL domain package
[   42.309103] intel_rapl_common: Found RAPL domain core
[   42.309104] intel_rapl_common: Found RAPL domain uncore
[   42.309105] intel_rapl_common: Found RAPL domain dram
[   42.309107] intel_rapl_common: Found RAPL domain psys
[   42.309139] Bluetooth: Core ver 2.22
[   42.309159] NET: Registered PF_BLUETOOTH protocol family
[   42.309161] Bluetooth: HCI device and connection manager initialized
[   42.309164] Bluetooth: HCI socket layer initialized
[   42.309167] Bluetooth: L2CAP socket layer initialized
[   42.309171] Bluetooth: SCO socket layer initialized
[   42.368003] usb 1-5: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c)
[   42.389587] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[   42.389609] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[   42.450835] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[   42.452683] usbcore: registered new interface driver uvcvideo
[   42.463092] audit: type=1400 audit(1711173522.598:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=615 comm="apparmor_parser"
[   42.463106] audit: type=1400 audit(1711173522.598:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=615 comm="apparmor_parser"
[   42.468619] audit: type=1400 audit(1711173522.606:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=614 comm="apparmor_parser"
[   42.481040] audit: type=1400 audit(1711173522.618:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=616 comm="apparmor_parser"
[   42.481050] audit: type=1400 audit(1711173522.618:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=616 comm="apparmor_parser"
[   42.481054] audit: type=1400 audit(1711173522.618:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=616 comm="apparmor_parser"
[   42.481057] audit: type=1400 audit(1711173522.618:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=616 comm="apparmor_parser"
[   42.490483] audit: type=1400 audit(1711173522.630:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=619 comm="apparmor_parser"
[   42.490494] audit: type=1400 audit(1711173522.630:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=619 comm="apparmor_parser"
[   42.490497] audit: type=1400 audit(1711173522.630:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=619 comm="apparmor_parser"
[   42.496341] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[   42.496889] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[   42.497250] usbcore: registered new interface driver btusb
[   42.509784] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[   42.509790] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[   42.884213] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[   42.911669] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[   42.942538] stackdepot: allocating hash table of 1048576 entries via kvcalloc
[   42.953919] Console: switching to colour dummy device 80x25
[   42.953983] i915 0000:00:02.0: vgaarb: deactivate vga console
[   42.996760] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   42.998313] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[   43.002988] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[   43.077812] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[   43.142340] snd_soc_avs 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[   43.275108] ath10k_pci 0000:3a:00.0: enabling device (0000 -> 0002)
[   43.278965] ath10k_pci 0000:3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[   43.329105] sof-audio-pci-intel-skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[   43.418728] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[   43.421921] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[   43.421942] snd_soc_avs 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[   43.421952] sof-audio-pci-intel-skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[   43.566692] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[   43.566698] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[   43.567088] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00288- api 6 features wowlan,ignore-otp,mfp crc32 bf907c7c
[   43.637222] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
[   43.647165] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[   43.654380] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
[   43.669522] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[   43.705729] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0
[   43.719405] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   43.723779] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input26
[   43.723945] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[   43.724202] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[   43.724210] snd_soc_avs 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[   43.724218] sof-audio-pci-intel-skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[   43.728318] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[   43.742948] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[   43.765940] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   43.797454] fbcon: i915drmfb (fb0) is primary device
[   43.817213] Console: switching to colour frame buffer device 200x56
[   43.844821] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[   43.856551] ath: EEPROM regdomain: 0x6c
[   43.856554] ath: EEPROM indicates we should expect a direct regpair map
[   43.856555] ath: Country alpha2 being used: 00
[   43.856556] ath: Regpair used: 0x6c
[   43.869616] Initializing XFRM netlink socket
[   43.870958] ath10k_pci 0000:3a:00.0 wlp58s0: renamed from wlan0
[   43.916913] IPsec XFRM device driver
[   43.951746] PPP generic driver version 2.4.2
[   43.958318] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   43.958326] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   43.958329] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   43.958332] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   43.958334] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   43.958336] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[   43.958338] snd_hda_codec_realtek hdaudioC0D0:      Headphone Mic=0x1a
[   43.958340] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   44.099147] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[   44.099351] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
[   44.100336] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
[   44.100439] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
[   44.100529] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31
[   44.376323] NET: Registered PF_PPPOX protocol family
[   44.669435] l2tp_core: L2TP core driver, V2.0
[   44.671187] l2tp_netlink: L2TP netlink interface
[   44.674946] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   47.396979] rfkill: input handler disabled
[   59.890659] wlp58s0: no HE support, limiting to HT/VHT
[   59.890666] wlp58s0: determined local STA to be HT, BW limited to 40 MHz
[   59.890677] wlp58s0: determined AP 88:71:b1:81:93:1a to be HT
[   59.890680] wlp58s0: connecting with HT mode, max bandwidth 40 MHz
[   59.945149] wlp58s0: authenticate with 88:71:b1:81:93:1a (local address=9c:b6:d0:d1:6a:b1)
[   59.945156] wlp58s0: send auth to 88:71:b1:81:93:1a (try 1/3)
[   60.046059] wlp58s0: send auth to 88:71:b1:81:93:1a (try 2/3)
[   60.150063] wlp58s0: send auth to 88:71:b1:81:93:1a (try 3/3)
[   60.254071] wlp58s0: authentication with 88:71:b1:81:93:1a timed out
[   65.247925] wlp58s0: no HE support, limiting to HT/VHT
[   65.247932] wlp58s0: determined local STA to be HT, BW limited to 40 MHz
[   65.247943] wlp58s0: determined AP 88:71:b1:81:93:1a to be HT
[   65.247946] wlp58s0: connecting with HT mode, max bandwidth 40 MHz
[   65.300994] wlp58s0: authenticate with 88:71:b1:81:93:1a (local address=9c:b6:d0:d1:6a:b1)
[   65.301000] wlp58s0: send auth to 88:71:b1:81:93:1a (try 1/3)
[   65.406089] wlp58s0: send auth to 88:71:b1:81:93:1a (try 2/3)
[   65.509980] wlp58s0: send auth to 88:71:b1:81:93:1a (try 3/3)
[   65.614055] wlp58s0: authentication with 88:71:b1:81:93:1a timed out
[   71.003269] wlp58s0: no HE support, limiting to HT/VHT
[   71.003274] wlp58s0: determined local STA to be HT, BW limited to 40 MHz
[   71.003283] wlp58s0: determined AP 88:71:b1:81:93:1a to be HT
[   71.003286] wlp58s0: connecting with HT mode, max bandwidth 40 MHz
[   71.056546] wlp58s0: authenticate with 88:71:b1:81:93:1a (local address=9c:b6:d0:d1:6a:b1)
[   71.056553] wlp58s0: send auth to 88:71:b1:81:93:1a (try 1/3)
[   71.158076] wlp58s0: send auth to 88:71:b1:81:93:1a (try 2/3)
[   71.262083] wlp58s0: send auth to 88:71:b1:81:93:1a (try 3/3)
[   71.365981] wlp58s0: authentication with 88:71:b1:81:93:1a timed out
[   77.265665] wlp58s0: no HE support, limiting to HT/VHT
[   77.265676] wlp58s0: determined local STA to be HT, BW limited to 40 MHz
[   77.265699] wlp58s0: determined AP 88:71:b1:81:93:1a to be HT
[   77.265707] wlp58s0: connecting with HT mode, max bandwidth 40 MHz
[   77.319241] wlp58s0: authenticate with 88:71:b1:81:93:1a (local address=9c:b6:d0:d1:6a:b1)
[   77.319255] wlp58s0: send auth to 88:71:b1:81:93:1a (try 1/3)
[   77.422069] wlp58s0: send auth to 88:71:b1:81:93:1a (try 2/3)
[   77.526067] wlp58s0: send auth to 88:71:b1:81:93:1a (try 3/3)
[   77.630078] wlp58s0: authentication with 88:71:b1:81:93:1a timed out
[   90.070558] wlp58s0: no HE support, limiting to HT/VHT
[   90.070568] wlp58s0: determined local STA to be HT, BW limited to 40 MHz
[   90.070589] wlp58s0: determined AP 88:71:b1:81:93:1a to be HT
[   90.070596] wlp58s0: connecting with HT mode, max bandwidth 40 MHz
[   90.123851] wlp58s0: authenticate with 88:71:b1:81:93:1a (local address=9c:b6:d0:d1:6a:b1)
[   90.123864] wlp58s0: send auth to 88:71:b1:81:93:1a (try 1/3)
[   90.226090] wlp58s0: send auth to 88:71:b1:81:93:1a (try 2/3)
[   90.330094] wlp58s0: send auth to 88:71:b1:81:93:1a (try 3/3)
[   90.434087] wlp58s0: authentication with 88:71:b1:81:93:1a timed out
[   97.963931] systemd-journald[481]: /var/log/journal/16ae67b9dca94ecebbc8ec78ab24e074/user-5272.journal: Journal file uses a different sequence number ID, rotating.
[   98.364947] rfkill: input handler enabled
[  101.770628] rfkill: input handler disabled
[  105.335265] wlp58s0: no VHT 160 MHz capability on 5 GHz, limiting to 80 MHz
[  105.335270] wlp58s0: no HE support, limiting to HT/VHT
[  105.335272] wlp58s0: determined local STA to be VHT, BW limited to 80 MHz
[  105.335284] wlp58s0: determined AP 88:71:b1:81:93:1b to be VHT
[  105.335287] wlp58s0: connecting with VHT mode, max bandwidth 80 MHz
[  105.374782] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[  105.374789] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[  105.477884] wlp58s0: send auth to 88:71:b1:81:93:1b (try 2/3)
[  105.581888] wlp58s0: send auth to 88:71:b1:81:93:1b (try 3/3)
[  105.685906] wlp58s0: authentication with 88:71:b1:81:93:1b timed out
[  135.493967] wlp58s0: no VHT 160 MHz capability on 5 GHz, limiting to 80 MHz
[  135.493972] wlp58s0: no HE support, limiting to HT/VHT
[  135.493976] wlp58s0: determined local STA to be VHT, BW limited to 80 MHz
[  135.493989] wlp58s0: determined AP 88:71:b1:81:93:1b to be VHT
[  135.493993] wlp58s0: connecting with VHT mode, max bandwidth 80 MHz
[  135.526622] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[  135.526629] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[  135.629899] wlp58s0: send auth to 88:71:b1:81:93:1b (try 2/3)
[  135.733900] wlp58s0: send auth to 88:71:b1:81:93:1b (try 3/3)
[  135.837879] wlp58s0: authentication with 88:71:b1:81:93:1b timed out
[  136.026843] wlp58s0: no HE support, limiting to HT/VHT
[  136.026849] wlp58s0: determined local STA to be HT, BW limited to 40 MHz
[  136.026860] wlp58s0: determined AP 88:71:b1:81:93:1a to be HT
[  136.026863] wlp58s0: connecting with HT mode, max bandwidth 40 MHz
[  136.081810] wlp58s0: authenticate with 88:71:b1:81:93:1a (local address=9c:b6:d0:d1:6a:b1)
[  136.081815] wlp58s0: send auth to 88:71:b1:81:93:1a (try 1/3)
[  136.185904] wlp58s0: send auth to 88:71:b1:81:93:1a (try 2/3)
[  136.289904] wlp58s0: send auth to 88:71:b1:81:93:1a (try 3/3)
[  136.393911] wlp58s0: authentication with 88:71:b1:81:93:1a timed out
[  141.474986] wlp58s0: no VHT 160 MHz capability on 5 GHz, limiting to 80 MHz
[  141.474991] wlp58s0: no HE support, limiting to HT/VHT
[  141.474994] wlp58s0: determined local STA to be VHT, BW limited to 80 MHz
[  141.475005] wlp58s0: determined AP 88:71:b1:81:93:1b to be VHT
[  141.475008] wlp58s0: connecting with VHT mode, max bandwidth 80 MHz
[  141.505430] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[  141.505435] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[  141.609921] wlp58s0: send auth to 88:71:b1:81:93:1b (try 2/3)
[  141.713916] wlp58s0: send auth to 88:71:b1:81:93:1b (try 3/3)
[  141.817885] wlp58s0: authentication with 88:71:b1:81:93:1b timed out
[  142.902546] wlp58s0: no HE support, limiting to HT/VHT
[  142.902551] wlp58s0: determined local STA to be HT, BW limited to 40 MHz
[  142.902559] wlp58s0: determined AP 88:71:b1:81:93:1a to be HT
[  142.902562] wlp58s0: connecting with HT mode, max bandwidth 40 MHz
[  142.958355] wlp58s0: authenticate with 88:71:b1:81:93:1a (local address=9c:b6:d0:d1:6a:b1)
[  142.958360] wlp58s0: send auth to 88:71:b1:81:93:1a (try 1/3)
[  143.061922] wlp58s0: send auth to 88:71:b1:81:93:1a (try 2/3)
[  143.165917] wlp58s0: send auth to 88:71:b1:81:93:1a (try 3/3)
[  143.269919] wlp58s0: authentication with 88:71:b1:81:93:1a timed out
[  153.855159] wlp58s0: no VHT 160 MHz capability on 5 GHz, limiting to 80 MHz
[  153.855164] wlp58s0: no HE support, limiting to HT/VHT
[  153.855166] wlp58s0: determined local STA to be VHT, BW limited to 80 MHz
[  153.855179] wlp58s0: determined AP 88:71:b1:81:93:1b to be VHT
[  153.855182] wlp58s0: connecting with VHT mode, max bandwidth 80 MHz
[  153.885776] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[  153.885781] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[  153.989909] wlp58s0: send auth to 88:71:b1:81:93:1b (try 2/3)
[  154.093908] wlp58s0: send auth to 88:71:b1:81:93:1b (try 3/3)
[  154.197908] wlp58s0: authentication with 88:71:b1:81:93:1b timed out
[  165.666279] wlp58s0: no VHT 160 MHz capability on 5 GHz, limiting to 80 MHz
[  165.666284] wlp58s0: no HE support, limiting to HT/VHT
[  165.666287] wlp58s0: determined local STA to be VHT, BW limited to 80 MHz
[  165.666300] wlp58s0: determined AP 88:71:b1:81:93:1b to be VHT
[  165.666303] wlp58s0: connecting with VHT mode, max bandwidth 80 MHz
[  165.695710] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[  165.695716] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[  165.697577] wlp58s0: authenticated
[  165.697753] wlp58s0: no VHT 160 MHz capability on 5 GHz, limiting to 80 MHz
[  165.697756] wlp58s0: no HE support, limiting to HT/VHT
[  165.697759] wlp58s0: determined local STA to be VHT, BW limited to 80 MHz
[  165.697891] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3)
[  165.718275] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=1)
[  165.720864] wlp58s0: associated
[  165.794175] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 88:71:b1:81:93:1b
[ 5944.835372] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING)
[ 5950.844234] PM: hibernation: hibernation entry
[ 5950.857258] Filesystems sync: 0.010 seconds
[ 5950.857640] Freezing user space processes
[ 5950.862413] Freezing user space processes completed (elapsed 0.004 seconds)
[ 5950.862424] OOM killer disabled.
[ 5950.862719] PM: hibernation: Marking nosave pages: [mem 0x00000000-0x00000fff]
[ 5950.862727] PM: hibernation: Marking nosave pages: [mem 0x00058000-0x00058fff]
[ 5950.862731] PM: hibernation: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[ 5950.862738] PM: hibernation: Marking nosave pages: [mem 0x513f1000-0x513f1fff]
[ 5950.862741] PM: hibernation: Marking nosave pages: [mem 0x51401000-0x51401fff]
[ 5950.862744] PM: hibernation: Marking nosave pages: [mem 0x556ab000-0x556acfff]
[ 5950.862747] PM: hibernation: Marking nosave pages: [mem 0x62260000-0x623ecfff]
[ 5950.862762] PM: hibernation: Marking nosave pages: [mem 0x64df4000-0x6fffefff]
[ 5950.864185] PM: hibernation: Marking nosave pages: [mem 0x70000000-0x77ffffff]
[ 5950.864454] PM: hibernation: Marking nosave pages: [mem 0x78600000-0xffffffff]
[ 5950.869464] PM: hibernation: Basic memory bitmaps created
[ 5950.869466] PM: hibernation: Preallocating image memory
[ 5958.848483] PM: hibernation: Allocated 1706818 pages for snapshot
[ 5958.848488] PM: hibernation: Allocated 6827272 kbytes in 7.97 seconds (856.62 MB/s)
[ 5958.848491] Freezing remaining freezable tasks
[ 5958.850025] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 5958.869814] printk: Suspending console(s) (use no_console_suspend to debug)
[ 5959.433934] ACPI: EC: interrupt blocked
[ 5959.442042] Disabling non-boot CPUs ...
[ 5959.445197] smpboot: CPU 1 is now offline
[ 5959.450298] smpboot: CPU 2 is now offline
[ 5959.453062] smpboot: CPU 3 is now offline
[ 5959.455164] PM: hibernation: Creating image:
[ 5959.728130] PM: hibernation: Need to copy 1694382 pages
[ 5959.728133] PM: hibernation: Normal pages needed: 1694382 + 1024, available pages: 2395520
[ 5961.008800] PM: hibernation: Image created (1103483 pages copied, 590899 zero pages)
[ 5959.456230] Enabling non-boot CPUs ...
[ 5959.456258] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 5959.456953] CPU1 is up
[ 5959.456970] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 5959.457701] CPU2 is up
[ 5959.457720] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 5959.458391] CPU3 is up
[ 5959.460163] ACPI: EC: interrupt unblocked
[ 5959.497630] nvme nvme0: 4/0/0 default/read/poll queues
[ 5959.802964] PM: Using 3 thread(s) for lzo compression
[ 5959.802981] PM: Compressing and saving image data (1106793 pages)...
[ 5959.803063] PM: Image saving progress:   0%
[ 5959.803726] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 5960.268391] PM: Image saving progress:  10%
[ 5960.733863] PM: Image saving progress:  20%
[ 5961.207809] PM: Image saving progress:  30%
[ 5961.604119] PM: Image saving progress:  40%
[ 5961.963254] PM: Image saving progress:  50%
[ 5962.292222] PM: Image saving progress:  60%
[ 5962.634869] PM: Image saving progress:  70%
[ 5962.978929] PM: Image saving progress:  80%
[ 5963.384730] PM: Image saving progress:  90%
[ 5963.750858] PM: Image saving progress: 100%
[ 5963.750962] PM: Image saving done
[ 5963.750963] PM: hibernation: Wrote 4427172 kbytes in 3.94 seconds (1123.64 MB/s)
[ 5963.750965] PM: Image size after compression: 620576 kbytes
[ 5963.751020] PM: S|
[ 5963.970131] printk: Suspending console(s) (use no_console_suspend to debug)
[ 5964.525026] ACPI: EC: interrupt blocked
[ 5964.561017] ACPI: PM: Preparing to enter system sleep state S3
[ 5964.571379] ACPI: EC: event blocked
[ 5964.571383] ACPI: EC: EC stopped
[ 5964.571384] ACPI: PM: Saving platform NVS memory
[ 5964.573987] Disabling non-boot CPUs ...
[ 5964.575764] smpboot: CPU 1 is now offline
[ 5964.578499] smpboot: CPU 2 is now offline
[ 5964.581437] smpboot: CPU 3 is now offline
[ 5964.586491] ACPI: PM: Low-level resume complete
[ 5964.586535] ACPI: EC: EC started
[ 5964.586536] ACPI: PM: Restoring platform NVS memory
[ 5964.588467] Enabling non-boot CPUs ...
[ 5964.588499] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 5964.589266] CPU1 is up
[ 5964.589284] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 5964.590059] CPU2 is up
[ 5964.590079] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 5964.590789] CPU3 is up
[ 5964.593764] ACPI: PM: Waking up from system sleep state S3
[ 5964.632697] ACPI: EC: interrupt unblocked
[ 5964.677424] ACPI: EC: event unblocked
[ 5964.690051] nvme nvme0: 4/0/0 default/read/poll queues
[ 5964.703397] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 5964.710019] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 5964.724664] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 5964.935375] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[ 5964.943582] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[ 5965.219543] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[ 5965.495639] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 5965.682087] PM: hibernation: Basic memory bitmaps freed
[ 5965.682178] OOM killer enabled.
[ 5965.682179] Restarting tasks ... done.
[ 5965.935181] PM: hibernation: hibernation exit
[ 5965.935657] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 5965.935661] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[ 5966.160147] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 5966.296230] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 5966.325025] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 5966.609067] Process accounting resumed
[ 5966.609350] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ 5971.833642] wlp58s0: no VHT 160 MHz capability on 5 GHz, limiting to 80 MHz
[ 5971.833649] wlp58s0: no HE support, limiting to HT/VHT
[ 5971.833653] wlp58s0: determined local STA to be VHT, BW limited to 80 MHz
[ 5971.833667] wlp58s0: determined AP 88:71:b1:81:93:1b to be VHT
[ 5971.833670] wlp58s0: connecting with VHT mode, max bandwidth 80 MHz
[ 5971.869002] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[ 5971.869009] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[ 5971.871083] wlp58s0: authenticated
[ 5971.871338] wlp58s0: no VHT 160 MHz capability on 5 GHz, limiting to 80 MHz
[ 5971.871342] wlp58s0: no HE support, limiting to HT/VHT
[ 5971.871345] wlp58s0: determined local STA to be VHT, BW limited to 80 MHz
[ 5971.875304] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3)
[ 5971.895801] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=1)
[ 5971.898966] wlp58s0: associated
[ 5971.910870] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 88:71:b1:81:93:1b
[ 8571.537694] ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)
[ 8576.657514] ucsi_acpi USBC000:00: GET_CABLE_PROPERTY failed (-110)
[ 8576.810905] ucsi_acpi USBC000:00: UCSI_GET_PD_MESSAGE failed (-95)
[ 8582.033276] ucsi_acpi USBC000:00: GET_CONNECTOR_STATUS failed (-110)
[ 8582.495520] ucsi_acpi USBC000:00: UCSI_GET_PD_MESSAGE failed (-95)
[ 8588.176564] ucsi_acpi USBC000:00: GET_CONNECTOR_STATUS failed (-110)
[ 8835.495979] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING)
[ 8839.953992] PM: suspend entry (deep)
[ 8839.965618] Filesystems sync: 0.011 seconds
[ 8839.973167] Freezing user space processes
[ 8839.976658] Freezing user space processes completed (elapsed 0.003 seconds)
[ 8839.976672] OOM killer disabled.
[ 8839.976676] Freezing remaining freezable tasks
[ 8839.978391] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 8839.978506] printk: Suspending console(s) (use no_console_suspend to debug)
[ 8840.568863] ACPI: EC: interrupt blocked
[ 8840.604409] ACPI: PM: Preparing to enter system sleep state S3
[ 8840.626378] ACPI: EC: event blocked
[ 8840.626379] ACPI: EC: EC stopped
[ 8840.626380] ACPI: PM: Saving platform NVS memory
[ 8840.627902] Disabling non-boot CPUs ...
[ 8840.629232] smpboot: CPU 1 is now offline
[ 8840.631873] smpboot: CPU 2 is now offline
[ 8840.633446] smpboot: CPU 3 is now offline
[ 8840.640816] ACPI: PM: Low-level resume complete
[ 8840.640861] ACPI: EC: EC started
[ 8840.640861] ACPI: PM: Restoring platform NVS memory
[ 8840.642748] Enabling non-boot CPUs ...
[ 8840.642781] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 8840.643525] CPU1 is up
[ 8840.643544] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 8840.644297] CPU2 is up
[ 8840.644315] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 8840.645008] CPU3 is up
[ 8840.647948] ACPI: PM: Waking up from system sleep state S3
[ 8840.699304] ACPI: EC: interrupt unblocked
[ 8840.718438] ACPI: EC: event unblocked
[ 8840.731576] nvme nvme0: 4/0/0 default/read/poll queues
[ 8840.735252] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 8840.744590] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 8840.767103] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 8840.976606] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[ 8841.028820] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[ 8841.308795] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 8841.588790] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[ 8841.742813] OOM killer enabled.
[ 8841.742816] Restarting tasks ... done.
[ 8841.753171] random: crng reseeded on system resumption
[ 8841.863622] PM: suspend exit
[ 8841.937529] Process accounting resumed
[ 8841.948290] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 8842.245719] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 8847.043697] wlp58s0: no VHT 160 MHz capability on 5 GHz, limiting to 80 MHz
[ 8847.043704] wlp58s0: no HE support, limiting to HT/VHT
[ 8847.043708] wlp58s0: determined local STA to be VHT, BW limited to 80 MHz
[ 8847.043733] wlp58s0: determined AP 88:71:b1:81:93:1b to be VHT
[ 8847.043741] wlp58s0: connecting with VHT mode, max bandwidth 80 MHz
[ 8847.076931] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[ 8847.076947] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[ 8847.080080] wlp58s0: authenticated
[ 8847.080680] wlp58s0: no VHT 160 MHz capability on 5 GHz, limiting to 80 MHz
[ 8847.080689] wlp58s0: no HE support, limiting to HT/VHT
[ 8847.080692] wlp58s0: determined local STA to be VHT, BW limited to 80 MHz
[ 8847.084419] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3)
[ 8847.107729] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=1)
[ 8847.110716] wlp58s0: associated
[ 8847.171767] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 88:71:b1:81:93:1b
[ 8847.768614] ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)
[ 9263.633136] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING)
[ 9266.842134] PM: suspend entry (deep)
[ 9266.856869] Filesystems sync: 0.014 seconds
[ 9266.873376] Freezing user space processes
[ 9266.880672] Freezing user space processes completed (elapsed 0.007 seconds)
[ 9266.880688] OOM killer disabled.
[ 9266.880692] Freezing remaining freezable tasks
[ 9266.882529] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 9266.882656] printk: Suspending console(s) (use no_console_suspend to debug)
[ 9267.476915] ACPI: EC: interrupt blocked
[ 9267.512372] ACPI: PM: Preparing to enter system sleep state S3
[ 9267.525003] ACPI: EC: event blocked
[ 9267.525008] ACPI: EC: EC stopped
[ 9267.525010] ACPI: PM: Saving platform NVS memory
[ 9267.528328] Disabling non-boot CPUs ...
[ 9267.530335] smpboot: CPU 1 is now offline
[ 9267.533569] smpboot: CPU 2 is now offline
[ 9267.538408] smpboot: CPU 3 is now offline
[ 9267.546488] ACPI: PM: Low-level resume complete
[ 9267.546531] ACPI: EC: EC started
[ 9267.546532] ACPI: PM: Restoring platform NVS memory
[ 9267.548430] Enabling non-boot CPUs ...
[ 9267.548456] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 9267.549185] CPU1 is up
[ 9267.549204] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 9267.549951] CPU2 is up
[ 9267.549969] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 9267.550647] CPU3 is up
[ 9267.553610] ACPI: PM: Waking up from system sleep state S3
[ 9267.592556] ACPI: EC: interrupt unblocked
[ 9267.614609] ACPI: EC: event unblocked
[ 9267.627256] nvme nvme0: 4/0/0 default/read/poll queues
[ 9267.635115] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 9267.644548] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 9267.658040] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 9267.860571] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[ 9267.932710] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[ 9268.213115] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 9268.492685] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[ 9268.647351] OOM killer enabled.
[ 9268.647353] Restarting tasks ... done.
[ 9268.653410] random: crng reseeded on system resumption
[ 9268.744771] PM: suspend exit
[ 9268.845208] Process accounting resumed
[ 9268.851205] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 9269.080955] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 9273.998457] wlp58s0: no VHT 160 MHz capability on 5 GHz, limiting to 80 MHz
[ 9273.998462] wlp58s0: no HE support, limiting to HT/VHT
[ 9273.998466] wlp58s0: determined local STA to be VHT, BW limited to 80 MHz
[ 9273.998478] wlp58s0: determined AP 88:71:b1:81:93:1b to be VHT
[ 9273.998482] wlp58s0: connecting with VHT mode, max bandwidth 80 MHz
[ 9274.034595] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[ 9274.034621] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[ 9274.037746] wlp58s0: authenticated
[ 9274.038493] wlp58s0: no VHT 160 MHz capability on 5 GHz, limiting to 80 MHz
[ 9274.038504] wlp58s0: no HE support, limiting to HT/VHT
[ 9274.038512] wlp58s0: determined local STA to be VHT, BW limited to 80 MHz
[ 9274.040850] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3)
[ 9274.072590] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=1)
[ 9274.077283] wlp58s0: associated
[ 9274.120593] wlp58s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 88:71:b1:81:93:1b

[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux