Re: [PATCH] Input: psmouse - add resync_on_resume dmi check

[Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>]

On Mon, Mar 04, 2024 at 11:17:31AM -0600, Jonathan Denose wrote:
> I disabled the ideapad driver by rebuilding the kernel without the
> ideapad_laptop module. That does fix the suspend/resume issue!
> 
> Attached are the logs. Is there a way to make this permanent?

Could you please try the patch below? Thanks!

---

diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 9fbb8d31575a..2f0c143c3137 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -127,6 +127,7 @@ MODULE_PARM_DESC(unmask_kbd_data, "Unconditional enable (may reveal sensitive da
 #endif
 
 static bool i8042_present;
+static bool i8042_ready;
 static bool i8042_bypass_aux_irq_test;
 static char i8042_kbd_firmware_id[128];
 static char i8042_aux_firmware_id[128];
@@ -190,6 +191,26 @@ void i8042_unlock_chip(void)
 }
 EXPORT_SYMBOL(i8042_unlock_chip);
 
+int i8042_device_link_add(struct device *consumer)
+{
+	if (!i8042_present)
+		return -ENODEV;
+
+	if (!i8042_platform_device || !i8042_ready)
+		return -EPROBE_DEFER;
+
+	return device_link_add(consumer, &i8042_platform_device->dev,
+			       DL_FLAG_STATELESS) != NULL;
+}
+EXPORT_SYMBOL(i8042_device_link_add);
+
+void i8042_device_link_remove(struct device *consumer)
+{
+	if (i8042_platform_device)
+		device_link_remove(consumer, &i8042_platform_device->dev);
+}
+EXPORT_SYMBOL(i8042_device_link_remove);
+
 int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str,
 					struct serio *serio))
 {
@@ -1574,6 +1595,7 @@ static int i8042_probe(struct platform_device *dev)
  */
 	i8042_register_ports();
 
+	i8042_ready = true;
 	return 0;
 
  out_fail:
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index ac037540acfc..d4d1bccbe882 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -1842,6 +1842,13 @@ static int ideapad_acpi_add(struct platform_device *pdev)
 			ideapad_register_rfkill(priv, i);
 
 	ideapad_sync_rfk_state(priv);
+
+	err = i8042_device_link_add(&pdev->dev);
+	if (err) {
+		dev_err(&pdev->dev, "failed to link with 8042 controller :%d", err);
+		goto i8042_link_failed;
+	}
+
 	ideapad_sync_touchpad_state(priv, false);
 
 	err = ideapad_dytc_profile_init(priv);
@@ -1882,7 +1889,9 @@ static int ideapad_acpi_add(struct platform_device *pdev)
 
 backlight_failed:
 	ideapad_dytc_profile_exit(priv);
+	i8042_device_link_remove(&pdev->dev);
 
+i8042_link_failed:
 	for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++)
 		ideapad_unregister_rfkill(priv, i);
 
@@ -1909,6 +1918,7 @@ static void ideapad_acpi_remove(struct platform_device *pdev)
 
 	ideapad_backlight_exit(priv);
 	ideapad_dytc_profile_exit(priv);
+	i8042_device_link_remove(&pdev->dev);
 
 	for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++)
 		ideapad_unregister_rfkill(priv, i);
diff --git a/include/linux/i8042.h b/include/linux/i8042.h
index 95b07f8b77fe..ce45569f5246 100644
--- a/include/linux/i8042.h
+++ b/include/linux/i8042.h
@@ -52,12 +52,15 @@
 #define I8042_CTR_AUXDIS	0x20
 #define I8042_CTR_XLATE		0x40
 
+struct device;
 struct serio;
 
 #if defined(CONFIG_SERIO_I8042) || defined(CONFIG_SERIO_I8042_MODULE)
 
 void i8042_lock_chip(void);
 void i8042_unlock_chip(void);
+int i8042_device_link_add(struct device *dev);
+void i8042_device_link_remove(struct device *dev);
 int i8042_command(unsigned char *param, int command);
 int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str,
 					struct serio *serio));
@@ -74,6 +77,15 @@ static inline void i8042_unlock_chip(void)
 {
 }
 
+int i8042_device_link_add(struct device *dev)
+{
+	return -ENODEV;
+}
+
+void i8042_device_link_remove(struct device *dev)
+{
+}
+
 static inline int i8042_command(unsigned char *param, int command)
 {
 	return -ENODEV;



Thanks.

-- 
Dmitry