Some third-party controllers never switch to the full 0x11 report.
They keep sending the short 0x01 report, so let's parse that instead.
Signed-off-by: Max Staudt <max@xxxxxxxxx>
---
drivers/hid/hid-playstation.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/hid/hid-playstation.c b/drivers/hid/hid-playstation.c
index 53bfc2828a61..6b0f25688657 100644
--- a/drivers/hid/hid-playstation.c
+++ b/drivers/hid/hid-playstation.c
@@ -287,6 +287,8 @@ struct dualsense_output_report {
#define DS4_INPUT_REPORT_USB 0x01
#define DS4_INPUT_REPORT_USB_SIZE 64
+#define DS4_INPUT_REPORT_BT_MINIMAL 0x01
+#define DS4_INPUT_REPORT_BT_MINIMAL_SIZE 10
#define DS4_INPUT_REPORT_BT 0x11
#define DS4_INPUT_REPORT_BT_SIZE 78
#define DS4_OUTPUT_REPORT_USB 0x05
@@ -2196,6 +2198,7 @@ static int dualshock4_parse_report(struct ps_device *ps_dev, struct hid_report *
int battery_status, i, j;
uint16_t sensor_timestamp;
unsigned long flags;
+ bool is_minimal = false;
/*
* DualShock4 in USB uses the full HID report for reportID 1, but
@@ -2223,6 +2226,18 @@ static int dualshock4_parse_report(struct ps_device *ps_dev, struct hid_report *
ds4_report = &bt->common;
num_touch_reports = bt->num_touch_reports;
touch_reports = bt->touch_reports;
+ } else if (hdev->bus == BUS_BLUETOOTH &&
+ report->id == DS4_INPUT_REPORT_BT_MINIMAL &&
+ size == DS4_INPUT_REPORT_BT_MINIMAL_SIZE) {
+ /* Some third-party pads never switch to the full 0x11 report.
+ * The short 0x01 report is 10 bytes long:
+ * u8 report_id == 0x01
+ * u8 first_bytes_of_full_report[9]
+ * So let's reuse the full report parser, and stop it after
+ * parsing the buttons.
+ */
+ ds4_report = (struct dualshock4_input_report_common *)&data[1];
+ is_minimal = true;
} else {
hid_err(hdev, "Unhandled reportID=%d\n", report->id);
return -1;
@@ -2256,6 +2271,9 @@ static int dualshock4_parse_report(struct ps_device *ps_dev, struct hid_report *
input_report_key(ds4->gamepad, BTN_MODE, ds4_report->buttons[2] & DS_BUTTONS2_PS_HOME);
input_sync(ds4->gamepad);
+ if (is_minimal)
+ return 0;
+
/* Parse and calibrate gyroscope data. */
for (i = 0; i < ARRAY_SIZE(ds4_report->gyro); i++) {
int raw_data = (short)le16_to_cpu(ds4_report->gyro[i]);
--
2.39.2
