On Mon, Jan 29, 2024 at 08:47:47AM -0800, Bjorn Andersson wrote: > Some I2C HID devices has a reset pin and requires that some specified > time elapses after this reset pin is deasserted, before communication > with the device is attempted. > > The Linux implementation is looking for these in the "reset-gpios" and > "post-reset-deassert-delay-ms" properties already, so use these property > names. > + post-reset-deassert-delay-ms: > + description: Time required by the device after reset has been deasserted, > + before it is ready for communication. > + > + reset-gpios: true Hmm, for the third time, it seems you ignored my comment that you need to remove the comment about these properties from the driver as part of this series. /* * Note this is a kernel internal device-property set by x86 platform code, * this MUST not be used in devicetree files without first adding it to * the DT bindings. */ if (!device_property_read_u32(dev, "post-reset-deassert-delay-ms", &val)) ihid_of->post_reset_delay_ms = val; > + > touchscreen-inverted-x: true > > touchscreen-inverted-y: true Johan
