Re: [PATCH] iio: hid-sensor-als: Don't stop probing at non-supported attribute

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 16 Dec 2023 13:42:29 +0200
Yauhen Kharuzhy <jekhor@xxxxxxxxx> wrote:

> Some ambient light sensors don't support color temperature and
> chromaticity attributes. The driver stops probing if it finds this.
> 
> To support sensors without of color temperature and chromaticity
> attributes, just skip them at probing if they weren't found.
> 
> Tested at Lenovo Yogabook YB1-X91L tablet.
> 
> Signed-off-by: Yauhen Kharuzhy <jekhor@xxxxxxxxx>
i reviewed this one as as well as Srinivas' as that had issues that need solving.

This one just seems to half paper over the problem  It won't update the channels
etc but the set of channels provided to userspace are still garbage.

So better than before, but not fixing the issue fully.

Jonathan

> ---
>  drivers/iio/light/hid-sensor-als.c | 39 ++++++++++++++++++------------
>  1 file changed, 23 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c
> index f17304b54468..b711bac3bb2b 100644
> --- a/drivers/iio/light/hid-sensor-als.c
> +++ b/drivers/iio/light/hid-sensor-als.c
> @@ -314,8 +314,11 @@ static int als_parse_report(struct platform_device *pdev,
>  						usage_id,
>  						HID_USAGE_SENSOR_LIGHT_ILLUM,
>  						&st->als[i]);
> -		if (ret < 0)
> +		if (ret < 0) {
> +			dev_err(&pdev->dev,
> +				"Failed to setup Illuminance attribute\n");
>  			return ret;
> +		}

Unrelated change. For a fix we should look to keep things minimal.

>  		als_adjust_channel_bit_mask(channels, i, st->als[i].size);
>  
>  		dev_dbg(&pdev->dev, "als %x:%x\n", st->als[i].index,
> @@ -326,14 +329,16 @@ static int als_parse_report(struct platform_device *pdev,
>  				usage_id,
>  				HID_USAGE_SENSOR_LIGHT_COLOR_TEMPERATURE,
>  				&st->als[CHANNEL_SCAN_INDEX_COLOR_TEMP]);
> -	if (ret < 0)
> -		return ret;
> -	als_adjust_channel_bit_mask(channels, CHANNEL_SCAN_INDEX_COLOR_TEMP,
> -				st->als[CHANNEL_SCAN_INDEX_COLOR_TEMP].size);
> +	if (!ret) {
> +		dev_info(&pdev->dev, "Color temperature is supported\n");

I'd argue we shouldn't print a message on this.
Use the availability of channels after driver is probed to figure this out if
needed. 

> +		als_adjust_channel_bit_mask(channels,
> +			CHANNEL_SCAN_INDEX_COLOR_TEMP,
> +			st->als[CHANNEL_SCAN_INDEX_COLOR_TEMP].size);
>  
> -	dev_dbg(&pdev->dev, "als %x:%x\n",
> -		st->als[CHANNEL_SCAN_INDEX_COLOR_TEMP].index,
> -		st->als[CHANNEL_SCAN_INDEX_COLOR_TEMP].report_id);
> +		dev_dbg(&pdev->dev, "als %x:%x\n",
> +			st->als[CHANNEL_SCAN_INDEX_COLOR_TEMP].index,
> +			st->als[CHANNEL_SCAN_INDEX_COLOR_TEMP].report_id);
> +	}
>  
>  	for (i = 0; i < 2; i++) {
>  		int next_scan_index = CHANNEL_SCAN_INDEX_CHROMATICITY_X + i;
> @@ -342,23 +347,25 @@ static int als_parse_report(struct platform_device *pdev,
>  				HID_INPUT_REPORT, usage_id,
>  				HID_USAGE_SENSOR_LIGHT_CHROMATICITY_X + i,
>  				&st->als[next_scan_index]);
> -		if (ret < 0)
> -			return ret;
> -
> -		als_adjust_channel_bit_mask(channels,
> +		if (!ret) {
> +			dev_info(&pdev->dev,
> +				 "Light chromaticity %c is supported\n",
> +				 i ? 'Y' : 'X');
> +			als_adjust_channel_bit_mask(channels,
>  					CHANNEL_SCAN_INDEX_CHROMATICITY_X + i,
>  					st->als[next_scan_index].size);
>  
> -		dev_dbg(&pdev->dev, "als %x:%x\n",
> -			st->als[next_scan_index].index,
> -			st->als[next_scan_index].report_id);
> +			dev_dbg(&pdev->dev, "als %x:%x\n",
> +				st->als[next_scan_index].index,
> +				st->als[next_scan_index].report_id);
> +		}
>  	}
>  
>  	st->scale_precision = hid_sensor_format_scale(usage_id,
>  				&st->als[CHANNEL_SCAN_INDEX_INTENSITY],
>  				&st->scale_pre_decml, &st->scale_post_decml);
>  
> -	return ret;
> +	return 0;
>  }
>  
>  /* Function to initialize the processing for usage id */





[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux