This introduces yet another second-source touchscreen found on Hana.
This is a G2touch G7500 touchscreen, which is compatible with HID over
I2C.
Add a device node for it. In keeping with the new scheme for second
source components, mark it as "failed-needs-probe".
Signed-off-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
---
Changes since v2:
- Drop class from status
---
arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
index 1d68bc6834e4..216d8b43be05 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
@@ -31,6 +31,15 @@ touchscreen3: touchscreen@20 {
interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
status = "fail-needs-probe";
};
+
+ touchscreen4: touchscreen@40 {
+ compatible = "hid-over-i2c";
+ reg = <0x40>;
+ hid-descr-addr = <0x0001>;
+ interrupt-parent = <&pio>;
+ interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+ status = "fail-needs-probe";
+ };
};
&i2c4 {
--
2.43.0.rc1.413.gea7ed67945-goog
