On all i2c-hid devices seen sofar the reset-ack either works, or the hw is
somehow buggy and does not (always) ack the reset properly, yet it still
works fine.
Lower the very long reset timeout to 1 second which should be plenty
and change the reset not getting acked from an error into a warning.
This results in a bit cleaner code and avoids the need to add more
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET quirks in the future.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/hid/i2c-hid/i2c-hid-core.c | 11 +++--------
1 file changed, 3 insertions(+), 8 deletions(-)
diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index 48582c75a51b..96fb5aafc1fa 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -481,9 +481,9 @@ static int i2c_hid_finish_hwreset(struct i2c_hid *ihid)
if (!wait_event_timeout(ihid->wait,
!test_bit(I2C_HID_RESET_PENDING, &ihid->flags),
- msecs_to_jiffies(5000))) {
- ret = -ENODATA;
- goto err_clear_reset;
+ msecs_to_jiffies(1000))) {
+ dev_warn(&ihid->client->dev, "device did not ack reset within 1000 ms\n");
+ clear_bit(I2C_HID_RESET_PENDING, &ihid->flags);
}
i2c_hid_dbg(ihid, "%s: finished.\n", __func__);
@@ -492,11 +492,6 @@ static int i2c_hid_finish_hwreset(struct i2c_hid *ihid)
ret = i2c_hid_set_power(ihid, I2C_HID_PWR_ON);
return ret;
-
-err_clear_reset:
- clear_bit(I2C_HID_RESET_PENDING, &ihid->flags);
- i2c_hid_set_power(ihid, I2C_HID_PWR_SLEEP);
- return ret;
}
static void i2c_hid_get_input(struct i2c_hid *ihid)
--
2.41.0
