Allow configuring an optional dedicated wakeirq for gpio-keys that
some SoCs have.
Let's use the common interrupt naming "irq" and "wakeup" that we already
have in use for some drivers and subsystems like i2c framework.
Note that the gpio-keys interrupt property is optional. If only a gpio
property is specified, the driver tries to translate the gpio into an
interrupt.
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
Changes since v1:
- Run make dt_binding_check on the binding
- Add better checks for interrupt-names as suggested by Rob, it is
now required if two interrupts are configured
- Add more decription entries
- Add a new example for key-wakeup
---
.../devicetree/bindings/input/gpio-keys.yaml | 41 ++++++++++++++++++-
1 file changed, 40 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml
--- a/Documentation/devicetree/bindings/input/gpio-keys.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml
@@ -31,7 +31,23 @@ patternProperties:
maxItems: 1
interrupts:
- maxItems: 1
+ oneOf:
+ - items:
+ - description: Optional key interrupt or wakeup interrupt
+ - items:
+ - description: Key interrupt
+ - description: Wakeup interrupt
+
+ interrupt-names:
+ description:
+ Optional interrupt names, can be used to specify a separate dedicated
+ wake-up interrupt in addition to the gpio irq
+ oneOf:
+ - items:
+ - enum: [ irq, wakeup ]
+ - items:
+ - const: irq
+ - const: wakeup
label:
description: Descriptive name of the key.
@@ -97,6 +113,20 @@ patternProperties:
- required:
- gpios
+ allOf:
+ - if:
+ properties:
+ interrupts:
+ minItems: 2
+ required:
+ - interrupts
+ then:
+ properties:
+ interrupt-names:
+ minItems: 2
+ required:
+ - interrupt-names
+
dependencies:
wakeup-event-action: [ wakeup-source ]
linux,input-value: [ gpios ]
@@ -137,6 +167,15 @@ examples:
linux,code = <108>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
};
+
+ key-wakeup {
+ label = "GPIO Key WAKEUP";
+ linux,code = <143>;
+ interrupts-extended = <&intc 2 IRQ_TYPE_EDGE_FALLING>,
+ <&intc_wakeup 0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "irq", "wakeup";
+ wakeup-source;
+ };
};
...
--
2.42.0
