Re: [PATCH] HID: i2c-hid: fix handling of unpopulated devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 18, 2023 at 08:00:15AM -0700, Doug Anderson wrote:
> On Mon, Sep 18, 2023 at 6:00 AM Johan Hovold <johan+linaro@xxxxxxxxxx> wrote:
> > A recent commit reordered probe so that the interrupt line is now
> > requested before making sure that the device exists.
> >
> > This breaks machines like the Lenovo ThinkPad X13s which rely on the
> > HID driver to probe second-source devices and only register the variant
> > that is actually populated. Specifically, the interrupt line may now
> > already be (temporarily) claimed when doing asynchronous probing of the
> > touchpad:
> >
> >         genirq: Flags mismatch irq 191. 00082008 (hid-over-i2c) vs. 00082008 (hid-over-i2c)
> >         i2c_hid_of 21-0015: Could not register for hid-over-i2c interrupt, irq = 191, ret = -16
> >         i2c_hid_of: probe of 21-0015 failed with error -16
> >
> > Fix this by restoring the old behaviour of first making sure the device
> > exists before requesting the interrupt line.

> Ugh, sorry for the regression. :( It actually turns out that I've been
> digging into this same issue on a different device (see
> mt8173-elm-hana). I hadn't realized that it was a regression caused by
> my recent change, though.
> 
> I haven't yet reviewed your change in detail, but to me it seems like
> at most a short term fix. Specifically, I think the way that this has
> been working has been partially via hacks and partially via luck. Let
> me explain...
> 
> Currently, to make this work the `sc8280xp-lenovo-thinkpad-x13s.dts`
> file has a hack in it. You can see that the `tpad_default` pinctrl
> entry has been moved up to the i2c bus level even though it doesn't
> belong there (it should be in each trackpad). This is because,
> otherwise, you would have run into similar type problems as the device
> core would have failed to claim the pin for one of the devices.

Ḯ'm well aware of that and it was mentioned in the commit message for
4367d763698c ("arm64: dts: qcom: sc8280xp-x13s: enable alternate
touchpad") as well as discussed briefly with Rob here:

	https://lore.kernel.org/all/Y3teH14YduOQQkNn@xxxxxxxxxxxxxxxxxxxx/

> Currently, we're getting a bit lucky with
> `sc8280xp-lenovo-thinkpad-x13s.dts` that there are no other shared
> resources between the two devices besides the interrupt. Specifically
> a number of trackpads / touchscreens also have a "reset" GPIO that
> needs to be power sequenced properly in order to talk to the
> touchscreen. In this case we'll be stuck again because both instances
> would need to grab the "reset" GPIO before being able to confirm if
> the device is there.

Right, this will only work for fairly simple cases, but we do have a few
of those in tree since some years back.

> This is an old problem. The first I remember running into it was back
> in 2015 on rk3288-veryron-minnie. We had a downstream hack to make
> this work with -EPROBE_DEFER. https://crrev.com/c/266224. By the time
> we shipped, though, we decided not to do the 2nd sourcing. After that
> I always NAKed HW designs like this, but I guess that didn't help with
> Mediatek hardware I wasn't involved with. :( ...and, of course, it
> didn't help with devices that aren't Chromebooks like the Thinkpad
> X13S.
> 
> FWIW: as a short term solution, we ended up forcing synchronous probe
> in <https://crrev.com/c/4857566>. This has some pretty serious boot
> time implications, but it's also very simple.
> 
> 
> I'm actively working on coming up with a better solution here. My
> current thought is that that maybe we want to do:
> 
> 1. Undo the hack in the device tree and have each "2nd source" have
> its own pinctrl entry.
> 
> 2. In core pinctrl / device probing code detect the pinctrl conflict
> and only probe one of the devices at a time.
> 
> ...that sounds like a nice/elegant solution and I'm trying to make it
> work, though it does have some downsides. Namely:
> 
> a) It requires "dts" changes to work. Namely we've got to undo the
> hack that pushed the pinctrl up to the controller level (or, in the
> case of mt8173-elm-hana, that just totally skipped the "pinctrl" entry
> altogether). Unfortunately those same "dts" changes will actually make
> things _worse_ if you don't have the code change. :(

Right, a proper solution will likely require an updated DT.

> b) It only handles the case where the resources shared by 2nd sourcing
> are expressed by pinctrl. In a practical sense this seems to be most
> cases, but conceivably you could imagine running into this situation
> with a non-pin-related shared resource.

Indeed.

> c) To solve this in the core, we have to make sure we properly handle
> (without hanging/failing) multiple partially-conflicting devices and
> devices that might acquire resources in arbitrary orders.
> 
> Though the above solution detecting the pinctrl conflicts sounds
> appealing and I'm currently working on prototyping it, I'm still not
> 100% convinced. I'm worried about the above downsides.

Yes, I agree that we'd need to take a broader look at this and not just
focus on the immediate pinctrl issue.
 
> Personally, I feel like we could add information to the device tree
> that would help us out. The question is: is this an abuse of device
> tree for something that Linux ought to be able to figure out on its
> own, or is it OK? To make it concrete, I was thinking about something
> like this:
> 
> / {
>   tp_ex_group: trackpad-exclusion-group {
>     members = <&tp1>, <&tp2>, <&tp3>;
>   };
> };
> 
> &i2c_bus {
>   tp1: trackpad@10 {
>     ...
>     mutual-exclusion-group = <&tp_ex_group>;
>   };
>   tp2: trackpad@20 {
>     ...
>     mutual-exclusion-group = <&tp_ex_group>;
>   };
>   tp3: trackpad@30 {
>     ...
>     mutual-exclusion-group = <&tp_ex_group>;
>   };
> };
> 
> Then the device core would know not to probe devices in the same
> "mutual-exclusion-group" at the same time.
> 
> If DT folks are OK with the "mutual-exclusion-group" idea then I'll
> probably backburner my attempt to make this work on the pinctrl level
> and go with that.

I expressed something along these lines in the thread above:

	It seems we'd need some way to describe the devices as mutually
	exclusive...

but given that we had prior art for handling simple cases and due to
lack of time, I left it on the ever-growing todo list.

But regardless of what a long-term proper solution to this may look
like, we need to fix the regression in 6.6-rc1 by restoring the old
behaviour.

Johan



[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux