Re: [PATCH] HID: intel-ish-hid: ipc: Rework EHL OOB wakeup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Even,

On Mon, Sep 18, 2023 at 8:33 AM Xu, Even <even.xu@xxxxxxxxx> wrote:
>
> Hi, Kai-Heng,
>
> I just got feedback, for testing EHL S5 wakeup feature, you need several steps to setup and access  "https://portal.devicewise.com/things/browse"; to trigger wake.
> But currently, our test account of this website are all out of data.
> So maybe you need double check with the team who required you preparing the patch for the verification.

The patch is to solve the GPE refcount overflow, while maintaining S5
wakeup. I don't have any mean to test S5 wake.

So if you also don't have ways to verify S5 wake functionality, maybe
we can simply revert 2e23a70edabe  ("HID: intel-ish-hid: ipc: finish
power flow for EHL OOB") as alternative?

Kai-Heng

> Thanks!
>
> Best Regards,
> Even Xu
>
> -----Original Message-----
> From: Xu, Even
> Sent: Friday, September 15, 2023 3:27 PM
> To: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
> Cc: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>; jikos@xxxxxxxxxx; benjamin.tissoires@xxxxxxxxxx; linux-pm@xxxxxxxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx; Lee, Jian Hui <jianhui.lee@xxxxxxxxxxxxx>; Zhang, Lixu <Lixu.Zhang@xxxxxxxxx>; Ba, Najumon <najumon.ba@xxxxxxxxx>; linux-input@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Subject: RE: [PATCH] HID: intel-ish-hid: ipc: Rework EHL OOB wakeup
>
> Hi, Kai-Heng,
>
> I am also not familiar with this S5 wakeup test case.
> I already sent out mails to ask for help on it.
> Will come back to you once I get feedback.
> Thanks!
>
> Best Regards,
> Even Xu
>
> -----Original Message-----
> From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
> Sent: Friday, September 15, 2023 2:01 PM
> To: Xu, Even <even.xu@xxxxxxxxx>
> Cc: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>; jikos@xxxxxxxxxx; benjamin.tissoires@xxxxxxxxxx; linux-pm@xxxxxxxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx; Lee, Jian Hui <jianhui.lee@xxxxxxxxxxxxx>; Zhang, Lixu <lixu.zhang@xxxxxxxxx>; Ba, Najumon <najumon.ba@xxxxxxxxx>; linux-input@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH] HID: intel-ish-hid: ipc: Rework EHL OOB wakeup
>
> Hi Even,
>
> On Fri, Sep 15, 2023 at 1:31 PM Xu, Even <even.xu@xxxxxxxxx> wrote:
> >
> > Hi, Srinivas,
> >
> > Sure, I will test it.
> > As long term not working on EHL, I doesn't have EHL board on hand right now, I can test this patch on other ISH related platforms.
> > From the patch, it's focus on EHL platform, I assume Kai-Heng already verified the function on EHL board.
>
> I only made sure the GPE overflow issue is fixed by the patch, but I didn't test the S5 wakeup.
> That's because I don't know how to test it on the EHL system I have.
> I'll test it if you can let me know how to test the S5 wakeup.
>
> Kai-Heng
>
> > I don't think it will take effect on other platforms, anyway, I will test it on the platforms I have to provide cross platform verification.
> >
> > Thanks!
> >
> > Best Regards,
> > Even Xu
> >
> > -----Original Message-----
> > From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
> > Sent: Friday, September 15, 2023 12:11 AM
> > To: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>; jikos@xxxxxxxxxx;
> > benjamin.tissoires@xxxxxxxxxx
> > Cc: linux-pm@xxxxxxxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx; Lee, Jian Hui
> > <jianhui.lee@xxxxxxxxxxxxx>; Xu, Even <even.xu@xxxxxxxxx>; Zhang, Lixu
> > <lixu.zhang@xxxxxxxxx>; Ba, Najumon <najumon.ba@xxxxxxxxx>;
> > linux-input@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> > Subject: Re: [PATCH] HID: intel-ish-hid: ipc: Rework EHL OOB wakeup
> >
> > Hi Even,
> >
> > On Thu, 2023-09-14 at 12:18 +0800, Kai-Heng Feng wrote:
> > > System cannot suspend more than 255 times because the driver doesn't
> > > have corresponding acpi_disable_gpe() for acpi_enable_gpe(), so the
> > > GPE refcount overflows.
> > >
> > > Since PCI core and ACPI core already handles PCI PME wake and GPE
> > > wake when the device has wakeup capability, use device_init_wakeup()
> > > to let them do the wakeup setting work.
> > >
> > > Also add a shutdown callback which uses pci_prepare_to_sleep() to
> > > let PCI and ACPI set OOB wakeup for S5.
> > >
> > Please test this change.
> >
> > Thanks,
> > Srinivas
> >
> > > Fixes: 2e23a70edabe ("HID: intel-ish-hid: ipc: finish power flow for
> > > EHL OOB")
> > > Cc: Jian Hui Lee <jianhui.lee@xxxxxxxxxxxxx>
> > > Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
> > > ---
> > >  drivers/hid/intel-ish-hid/ipc/pci-ish.c | 59
> > > +++++++----------------
> > > --
> > >  1 file changed, 15 insertions(+), 44 deletions(-)
> > >
> > > diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c
> > > b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
> > > index 55cb25038e63..65e7eeb2fa64 100644
> > > --- a/drivers/hid/intel-ish-hid/ipc/pci-ish.c
> > > +++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
> > > @@ -119,42 +119,6 @@ static inline bool ish_should_leave_d0i3(struct
> > > pci_dev *pdev)
> > >         return !pm_resume_via_firmware() || pdev->device ==
> > > CHV_DEVICE_ID;  }
> > >
> > > -static int enable_gpe(struct device *dev) -{ -#ifdef CONFIG_ACPI
> > > -       acpi_status acpi_sts;
> > > -       struct acpi_device *adev;
> > > -       struct acpi_device_wakeup *wakeup;
> > > -
> > > -       adev = ACPI_COMPANION(dev);
> > > -       if (!adev) {
> > > -               dev_err(dev, "get acpi handle failed\n");
> > > -               return -ENODEV;
> > > -       }
> > > -       wakeup = &adev->wakeup;
> > > -
> > > -       acpi_sts = acpi_enable_gpe(wakeup->gpe_device, wakeup-
> > > >gpe_number);
> > > -       if (ACPI_FAILURE(acpi_sts)) {
> > > -               dev_err(dev, "enable ose_gpe failed\n");
> > > -               return -EIO;
> > > -       }
> > > -
> > > -       return 0;
> > > -#else
> > > -       return -ENODEV;
> > > -#endif
> > > -}
> > > -
> > > -static void enable_pme_wake(struct pci_dev *pdev) -{
> > > -       if ((pci_pme_capable(pdev, PCI_D0) ||
> > > -            pci_pme_capable(pdev, PCI_D3hot) ||
> > > -            pci_pme_capable(pdev, PCI_D3cold)) && !enable_gpe(&pdev-
> > > >dev)) {
> > > -               pci_pme_active(pdev, true);
> > > -               dev_dbg(&pdev->dev, "ish ipc driver pme wake
> > > enabled\n");
> > > -       }
> > > -}
> > > -
> > >  /**
> > >   * ish_probe() - PCI driver probe callback
> > >   * @pdev:      pci device
> > > @@ -225,7 +189,7 @@ static int ish_probe(struct pci_dev *pdev, const
> > > struct pci_device_id *ent)
> > >
> > >         /* Enable PME for EHL */
> > >         if (pdev->device == EHL_Ax_DEVICE_ID)
> > > -               enable_pme_wake(pdev);
> > > +               device_init_wakeup(dev, true);
> > >
> > >         ret = ish_init(ishtp);
> > >         if (ret)
> > > @@ -248,6 +212,19 @@ static void ish_remove(struct pci_dev *pdev)
> > >         ish_device_disable(ishtp_dev);  }
> > >
> > > +
> > > +/**
> > > + * ish_shutdown() - PCI driver shutdown callback
> > > + * @pdev:      pci device
> > > + *
> > > + * This function sets up wakeup for S5  */ static void
> > > +ish_shutdown(struct pci_dev *pdev) {
> > > +       if (pdev->device == EHL_Ax_DEVICE_ID)
> > > +               pci_prepare_to_sleep(pdev); }
> > > +
> > >  static struct device __maybe_unused *ish_resume_device;
> > >
> > >  /* 50ms to get resume response */
> > > @@ -370,13 +347,6 @@ static int __maybe_unused ish_resume(struct
> > > device *device)
> > >         struct pci_dev *pdev = to_pci_dev(device);
> > >         struct ishtp_device *dev = pci_get_drvdata(pdev);
> > >
> > > -       /* add this to finish power flow for EHL */
> > > -       if (dev->pdev->device == EHL_Ax_DEVICE_ID) {
> > > -               pci_set_power_state(pdev, PCI_D0);
> > > -               enable_pme_wake(pdev);
> > > -               dev_dbg(dev->devc, "set power state to D0 for ehl\n");
> > > -       }
> > > -
> > >         ish_resume_device = device;
> > >         dev->resume_flag = 1;
> > >
> > > @@ -392,6 +362,7 @@ static struct pci_driver ish_driver = {
> > >         .id_table = ish_pci_tbl,
> > >         .probe = ish_probe,
> > >         .remove = ish_remove,
> > > +       .shutdown = ish_shutdown,
> > >         .driver.pm = &ish_pm_ops,
> > >  };
> > >
> >




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux