Use generic `adc-channel@N' node names for board-specific ADC channels
(routed to MPP pins) to follow the schema.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
.../arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
index 8a511f69d800..26066c76e088 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
@@ -994,23 +994,27 @@ &pm8058_xoadc {
xoadc-ref-supply = <&pm8058_l18>;
/* Board-specific channels */
- mpp5@5 {
+ adc-channel@5 {
/* Connected to AOUT of ALS sensor */
reg = <0x00 0x05>;
};
- mpp6@6 {
+
+ adc-channel@6 {
/* Connected to test point TP43 */
reg = <0x00 0x06>;
};
- mpp7@7 {
+
+ adc-channel@7 {
/* Connected to battery thermistor */
reg = <0x00 0x07>;
};
- mpp8@8 {
+
+ adc-channel@8 {
/* Connected to battery ID detector */
reg = <0x00 0x08>;
};
- mpp9@9 {
+
+ adc-channel@9 {
/* Connected to XO thermistor */
reg = <0x00 0x09>;
};
--
2.39.2
