Extend the common binding to include a new variant of the silicon, which effectively replaces a pair of slider nodes with a trackpad node comprising the same or similar properties. As part of this change, the if/then/else schema have been updated to identify properties that are not supported by the new device. Signed-off-by: Jeff LaBundy <jeff@xxxxxxxxxxx> --- .../bindings/input/azoteq,iqs7222.yaml | 232 ++++++++++++++++-- 1 file changed, 215 insertions(+), 17 deletions(-) diff --git a/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml index 4c8690b62ce0..5b1769c19b17 100644 --- a/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml +++ b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml @@ -4,14 +4,14 @@ $id: http://devicetree.org/schemas/input/azoteq,iqs7222.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Azoteq IQS7222A/B/C Capacitive Touch Controller +title: Azoteq IQS7222A/B/C/D Capacitive Touch Controller maintainers: - Jeff LaBundy <jeff@xxxxxxxxxxx> description: | - The Azoteq IQS7222A, IQS7222B and IQS7222C are multichannel capacitive touch - controllers that feature additional sensing capabilities. + The Azoteq IQS7222A, IQS7222B, IQS7222C and IQS7222D are multichannel + capacitive touch controllers that feature additional sensing capabilities. Link to datasheets: https://www.azoteq.com/ @@ -21,6 +21,7 @@ properties: - azoteq,iqs7222a - azoteq,iqs7222b - azoteq,iqs7222c + - azoteq,iqs7222d reg: maxItems: 1 @@ -173,6 +174,152 @@ properties: maximum: 3000 description: Specifies the report rate (in ms) during ultra-low-power mode. + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + + trackpad: + type: object + description: Represents all channels associated with the trackpad. + + properties: + azoteq,channel-select: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 12 + items: + minimum: 0 + maximum: 13 + description: + Specifies the order of the channels that participate in the trackpad. + Specify 255 to omit a given channel for the purpose of mapping a non- + rectangular trackpad. + + azoteq,num-rows: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 12 + description: Specifies the number of rows that comprise the trackpad. + + azoteq,num-cols: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 12 + description: Specifies the number of columns that comprise the trackpad. + + azoteq,top-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 4 + minimum: 0 + maximum: 1020 + description: + Specifies the speed (in coordinates traveled per conversion) after + which coordinate filtering is no longer applied. + + azoteq,bottom-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: + Specifies the speed (in coordinates traveled per conversion) after + which coordinate filtering is linearly reduced. + + azoteq,use-prox: + type: boolean + description: + Directs the trackpad to respond to the proximity states of the + selected channels instead of their corresponding touch states. + Note the trackpad cannot report granular coordinates during a + state of proximity. + + patternProperties: + "^azoteq,lower-cal-(x|y)$": + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the trackpad's lower starting points. + + "^azoteq,upper-cal-(x|y)$": + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the trackpad's upper starting points. + + "^event-(press|tap|(swipe|flick)-(x|y)-(pos|neg))$": + type: object + $ref: input.yaml# + description: + Represents a press or gesture event reported by the trackpad. Specify + 'linux,code' under the press event to report absolute coordinates. + + properties: + linux,code: true + + azoteq,gesture-angle-tighten: + type: boolean + description: + Limits the tangent of the gesture angle to 0.5 (axial gestures + only). If specified in one direction, the effect is applied in + either direction. + + azoteq,gesture-max-ms: + multipleOf: 16 + minimum: 0 + maximum: 4080 + description: + Specifies the length of time (in ms) within which a tap, swipe + or flick gesture must be completed in order to be acknowledged + by the device. The number specified for any one swipe or flick + gesture applies to all other swipe or flick gestures. + + azoteq,gesture-min-ms: + multipleOf: 16 + minimum: 0 + maximum: 4080 + description: + Specifies the length of time (in ms) for which a tap gesture must + be held in order to be acknowledged by the device. + + azoteq,gesture-dist: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: + Specifies the distance (in coordinates) across which a swipe or + flick gesture must travel in order to be acknowledged by the + device. The number specified for any one swipe or flick gesture + applies to all remaining swipe or flick gestures. + + For tap gestures, this property specifies the distance from the + original point of contact across which the contact is permitted + to travel before the gesture is rejected by the device. + + azoteq,gpio-select: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 3 + items: + minimum: 0 + maximum: 2 + description: | + Specifies one or more GPIO mapped to the event as follows: + 0: GPIO0 + 1: GPIO3 + 2: GPIO4 + + Note that although multiple events can be mapped to a single + GPIO, they must all be of the same type (proximity, touch or + trackpad gesture). + + additionalProperties: false + + required: + - azoteq,channel-select + + additionalProperties: false + patternProperties: "^cycle-[0-9]$": type: object @@ -288,6 +435,10 @@ patternProperties: Activates the reference channel in response to proximity events instead of touch events. + azoteq,counts-filt-enable: + type: boolean + description: Applies counts filtering to the channel. + azoteq,ati-band: $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1, 2, 3] @@ -432,12 +583,12 @@ patternProperties: description: | Specifies one or more GPIO mapped to the event as follows: 0: GPIO0 - 1: GPIO3 (IQS7222C only) - 2: GPIO4 (IQS7222C only) + 1: GPIO3 + 2: GPIO4 Note that although multiple events can be mapped to a single GPIO, they must all be of the same type (proximity, touch or - slider gesture). + slider/trackpad gesture). azoteq,thresh: $ref: /schemas/types.yaml#/definitions/uint32 @@ -610,8 +761,8 @@ patternProperties: description: | Specifies one or more GPIO mapped to the event as follows: 0: GPIO0 - 1: GPIO3 (IQS7222C only) - 2: GPIO4 (IQS7222C only) + 1: GPIO3 + 2: GPIO4 Note that although multiple events can be mapped to a single GPIO, they must all be of the same type (proximity, touch or @@ -629,8 +780,8 @@ patternProperties: description: | Represents a GPIO mapped to one or more events as follows: gpio-0: GPIO0 - gpio-1: GPIO3 (IQS7222C only) - gpio-2: GPIO4 (IQS7222C only) + gpio-1: GPIO3 + gpio-2: GPIO4 allOf: - $ref: ../pinctrl/pincfg-node.yaml# @@ -641,11 +792,53 @@ patternProperties: additionalProperties: false allOf: + - $ref: touchscreen/touchscreen.yaml# + - if: properties: compatible: contains: - const: azoteq,iqs7222b + enum: + - azoteq,iqs7222a + - azoteq,iqs7222b + - azoteq,iqs7222c + + then: + properties: + touchscreen-size-x: false + touchscreen-size-y: false + touchscreen-inverted-x: false + touchscreen-inverted-y: false + touchscreen-swapped-x-y: false + + trackpad: false + + patternProperties: + "^channel-([0-9]|1[0-9])$": + properties: + azoteq,counts-filt-enable: false + + - if: + properties: + compatible: + contains: + enum: + - azoteq,iqs7222b + - azoteq,iqs7222c + + then: + patternProperties: + "^channel-([0-9]|1[0-9])$": + properties: + azoteq,ulp-allow: false + + - if: + properties: + compatible: + contains: + enum: + - azoteq,iqs7222b + - azoteq,iqs7222d then: patternProperties: @@ -657,13 +850,22 @@ allOf: properties: azoteq,ref-select: false + "^slider-[0-1]$": false + + - if: + properties: + compatible: + contains: + const: azoteq,iqs7222b + + then: + patternProperties: + "^channel-([0-9]|1[0-9])$": patternProperties: "^event-(prox|touch)$": properties: azoteq,gpio-select: false - "^slider-[0-1]$": false - "^gpio-[0-2]$": false - if: @@ -704,10 +906,6 @@ allOf: else: patternProperties: - "^channel-([0-9]|1[0-9])$": - properties: - azoteq,ulp-allow: false - "^slider-[0-1]$": patternProperties: "^event-(press|tap|(swipe|flick)-(pos|neg))$": -- 2.34.1
