The ili9882t is a TDDI IC (Touch with Display Driver). The datasheet specifies there should be 60ms between touch SDA sleep and panel RESX. Doug's series[1] allows panels and touchscreens to power on/off together, so we can add the 65 ms delay in i2c_hid_core_suspend before panel_unprepare. Beacuse ilitek9882 touchscrgeen is a panel follower, and needs to use vccio-supply instead of vcc33-supply, so set it "null" to ili9882t_chip_data, then using dummy regulator. [1]: https://lore.kernel.org/r/20230607215224.2067679-1-dianders@xxxxxxxxxxxx Signed-off-by: Cong Yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> --- drivers/hid/i2c-hid/i2c-hid-of-elan.c | 33 +++++++++++++++++++++------ 1 file changed, 26 insertions(+), 7 deletions(-) diff --git a/drivers/hid/i2c-hid/i2c-hid-of-elan.c b/drivers/hid/i2c-hid/i2c-hid-of-elan.c index 76ddc8be1cbb..40e6b8ebe8d1 100644 --- a/drivers/hid/i2c-hid/i2c-hid-of-elan.c +++ b/drivers/hid/i2c-hid/i2c-hid-of-elan.c @@ -18,9 +18,11 @@ #include "i2c-hid.h" struct elan_i2c_hid_chip_data { - unsigned int post_gpio_reset_delay_ms; + unsigned int post_gpio_reset_on_delay_ms; + unsigned int post_gpio_reset_off_delay_ms; unsigned int post_power_delay_ms; u16 hid_descriptor_address; + const char *main_supply_name; }; struct i2c_hid_of_elan { @@ -52,8 +54,8 @@ static int elan_i2c_hid_power_up(struct i2chid_ops *ops) msleep(ihid_elan->chip_data->post_power_delay_ms); gpiod_set_value_cansleep(ihid_elan->reset_gpio, 0); - if (ihid_elan->chip_data->post_gpio_reset_delay_ms) - msleep(ihid_elan->chip_data->post_gpio_reset_delay_ms); + if (ihid_elan->chip_data->post_gpio_reset_on_delay_ms) + msleep(ihid_elan->chip_data->post_gpio_reset_on_delay_ms); return 0; } @@ -64,6 +66,9 @@ static void elan_i2c_hid_power_down(struct i2chid_ops *ops) container_of(ops, struct i2c_hid_of_elan, ops); gpiod_set_value_cansleep(ihid_elan->reset_gpio, 1); + if (ihid_elan->chip_data->post_gpio_reset_off_delay_ms) + msleep(ihid_elan->chip_data->post_gpio_reset_off_delay_ms); + regulator_disable(ihid_elan->vccio); regulator_disable(ihid_elan->vcc33); } @@ -89,24 +94,38 @@ static int i2c_hid_of_elan_probe(struct i2c_client *client) if (IS_ERR(ihid_elan->vccio)) return PTR_ERR(ihid_elan->vccio); - ihid_elan->vcc33 = devm_regulator_get(&client->dev, "vcc33"); + ihid_elan->chip_data = device_get_match_data(&client->dev); + + ihid_elan->vcc33 = devm_regulator_get(&client->dev, ihid_elan->chip_data->main_supply_name); if (IS_ERR(ihid_elan->vcc33)) return PTR_ERR(ihid_elan->vcc33); - ihid_elan->chip_data = device_get_match_data(&client->dev); - return i2c_hid_core_probe(client, &ihid_elan->ops, ihid_elan->chip_data->hid_descriptor_address, 0); } static const struct elan_i2c_hid_chip_data elan_ekth6915_chip_data = { .post_power_delay_ms = 1, - .post_gpio_reset_delay_ms = 300, + .post_gpio_reset_on_delay_ms = 300, + .hid_descriptor_address = 0x0001, + .main_supply_name = "vcc33", +}; + +static const struct elan_i2c_hid_chip_data ilitek_ili9882t_chip_data = { + .post_power_delay_ms = 1, + .post_gpio_reset_on_delay_ms = 200, + .post_gpio_reset_off_delay_ms = 65, .hid_descriptor_address = 0x0001, + /* this touchscreen is tightly integrated with the panel and assumes + * that the relevant power rails (other than the IO rail) have already + * been turned on by the panel driver because we're a panel follower. + */ + .main_supply_name = "null", }; static const struct of_device_id elan_i2c_hid_of_match[] = { { .compatible = "elan,ekth6915", .data = &elan_ekth6915_chip_data }, + { .compatible = "ilitek,ili9882t", .data = &ilitek_ili9882t_chip_data }, { } }; MODULE_DEVICE_TABLE(of, elan_i2c_hid_of_match); -- 2.25.1
