The ili9882t is a TDDI IC (Touch with Display Driver). The datasheet specifies there should be 60ms between touch SDA sleep and panel RESX. Doug's series[1] allows panels and touchscreens to power on/off together, so we can add the 65 ms delay in i2c_hid_core_suspend before panel_unprepare. [1]: https: //lore.kernel.org/all/20230523193017.4109557-1-dianders@xxxxxxxxxxxx/ Signed-off-by: Cong Yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> --- drivers/hid/i2c-hid/i2c-hid-of-elan.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/drivers/hid/i2c-hid/i2c-hid-of-elan.c b/drivers/hid/i2c-hid/i2c-hid-of-elan.c index 76ddc8be1cbb..411d7ea2725d 100644 --- a/drivers/hid/i2c-hid/i2c-hid-of-elan.c +++ b/drivers/hid/i2c-hid/i2c-hid-of-elan.c @@ -18,7 +18,8 @@ #include "i2c-hid.h" struct elan_i2c_hid_chip_data { - unsigned int post_gpio_reset_delay_ms; + unsigned int post_gpio_reset_on_delay_ms; + unsigned int post_gpio_reset_off_delay_ms; unsigned int post_power_delay_ms; u16 hid_descriptor_address; }; @@ -52,8 +53,8 @@ static int elan_i2c_hid_power_up(struct i2chid_ops *ops) msleep(ihid_elan->chip_data->post_power_delay_ms); gpiod_set_value_cansleep(ihid_elan->reset_gpio, 0); - if (ihid_elan->chip_data->post_gpio_reset_delay_ms) - msleep(ihid_elan->chip_data->post_gpio_reset_delay_ms); + if (ihid_elan->chip_data->post_gpio_reset_on_delay_ms) + msleep(ihid_elan->chip_data->post_gpio_reset_on_delay_ms); return 0; } @@ -64,6 +65,9 @@ static void elan_i2c_hid_power_down(struct i2chid_ops *ops) container_of(ops, struct i2c_hid_of_elan, ops); gpiod_set_value_cansleep(ihid_elan->reset_gpio, 1); + if (ihid_elan->chip_data->post_gpio_reset_off_delay_ms) + msleep(ihid_elan->chip_data->post_gpio_reset_off_delay_ms); + regulator_disable(ihid_elan->vccio); regulator_disable(ihid_elan->vcc33); } @@ -101,12 +105,20 @@ static int i2c_hid_of_elan_probe(struct i2c_client *client) static const struct elan_i2c_hid_chip_data elan_ekth6915_chip_data = { .post_power_delay_ms = 1, - .post_gpio_reset_delay_ms = 300, + .post_gpio_reset_on_delay_ms = 300, + .hid_descriptor_address = 0x0001, +}; + +static const struct elan_i2c_hid_chip_data ilitek_ili9882t_chip_data = { + .post_power_delay_ms = 1, + .post_gpio_reset_on_delay_ms = 200, + .post_gpio_reset_off_delay_ms = 65, .hid_descriptor_address = 0x0001, }; static const struct of_device_id elan_i2c_hid_of_match[] = { { .compatible = "elan,ekth6915", .data = &elan_ekth6915_chip_data }, + { .compatible = "ilitek,ili9882t", .data = &ilitek_ili9882t_chip_data }, { } }; MODULE_DEVICE_TABLE(of, elan_i2c_hid_of_match); -- 2.25.1