Re: [PATCH v4 0/2] Fix Goodix touchscreen power leakage for MT8186 boards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, May 23, 2023 at 9:32 PM Doug Anderson <dianders@xxxxxxxxxxxx> wrote:
>
> Hi,
>
> On Tue, May 23, 2023 at 6:11 AM Jiri Kosina <jikos@xxxxxxxxxx> wrote:
> >
> > On Fri, 19 May 2023, Doug Anderson wrote:
> >
> > > > These changes are based on the series in [1], which modified the
> > > > i2c-hid-of-goodix driver and removed the workaround for a power leakage
> > > > issue, so the issue revisits on Mediatek MT8186 boards (Steelix).
> > > >
> > > > The root cause is that the touchscreen can be powered in different ways
> > > > depending on the hardware designs, and it's not as easy to come up with
> > > > a solution that is both simple and elegant for all the known designs.
> > > >
> > > > To address the issue, I ended up adding a new boolean property for the
> > > > driver so that we can control the power up/down sequence depending on
> > > > that.
> > > >
> > > > Adding a new property might not be the cleanest approach for this, but
> > > > at least the intention would be easy enough to understand, and it
> > > > introduces relatively small change to the code and fully preserves the
> > > > original control flow.
> > > > I hope this is something acceptable, and I'm open to any better
> > > > approaches.
> > > >
> > > > [1] https://lore.kernel.org/all/20230207024816.525938-1-dianders@xxxxxxxxxxxx/
> > > >
> > > > Changes in v4:
> > > > - Minor coding style improvement
> > > >
> > > > Changes in v3:
> > > > - In power-down, only skip the GPIO but not the regulator calls if the
> > > >   flag is set
> > > >
> > > > Changes in v2:
> > > > - Use a more accurate property name and with "goodix," prefix.
> > > > - Do not change the regulator_enable logic during power-up.
> > > >
> > > > Fei Shao (2):
> > > >   dt-bindings: input: goodix: Add "goodix,no-reset-during-suspend"
> > > >     property
> > > >   HID: i2c-hid: goodix: Add support for "goodix,no-reset-during-suspend"
> > > >     property
> > > >
> > > >  .../bindings/input/goodix,gt7375p.yaml           |  9 +++++++++
> > > >  drivers/hid/i2c-hid/i2c-hid-of-goodix.c          | 16 +++++++++++++++-
> > > >  2 files changed, 24 insertions(+), 1 deletion(-)
> > >
> > > Just double-checking if there is any work needed on this series. I
> > > think it's ready to land but I wanted to double-check.
> >
> > I don't think I've been CCed on the dt-binding part (patch 1/2 I guess).
> > Has it been Acked? If so, I will happily take it through hid.git, but
> > please send it my way.
>
> Yeah, Rob Acked it:
>
> https://lore.kernel.org/r/168261692866.3205353.5077242811275926416.robh@xxxxxxxxxx/
>
> Fei: can you repost the series with collected tags and make sure to CC Jiri?

Sure, I'll do that tomorrow  :)

Regards,
Fei

>
> Thanks!
>
> -Doug




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux