These changes are based on the series in [1], which modified the i2c-hid-of-goodix driver and removed the workaround for a power leakage issue, so the issue revisits on Mediatek MT8186 boards (Steelix). The root cause is that the touchscreen can be powered in different ways depending on the hardware designs, and it's not as easy to come up with a solution that is both simple and elegant for all the known designs. To address the issue, I ended up adding a new boolean property for the driver so that we can control the power up/down sequence depending on that. Adding a new property might not be the cleanest approach for this, but at least the intention would be easy enough to understand, and it introduces relatively small change to the code and fully preserves the original control flow. I hope this is something acceptable, and I'm open to any better approaches. [1] https://lore.kernel.org/all/20230207024816.525938-1-dianders@xxxxxxxxxxxx/ Fei Shao (2): dt-bindings: input: goodix: Add powered-in-suspend property HID: i2c-hid: goodix: Add support for powered-in-suspend property .../bindings/input/goodix,gt7375p.yaml | 6 +++ drivers/hid/i2c-hid/i2c-hid-of-goodix.c | 46 ++++++++++++++++--- 2 files changed, 45 insertions(+), 7 deletions(-) -- 2.40.0.634.g4ca3ef3211-goog
