There are some x86 tablets / 2-in-1s which ship with Android as their
factory OS image. These have pretty broken ACPI tables, relying on
everything being hardcoded in the factory kernel image.
platform/x86/x86-android-tablets.c manually instantiates i2c-clients for
i2c devices on these tablets to make them work with the mainline kernel.
The Lenovo Yoga Book 1 (yb1-x90f/l) is such a 2-in-1. It has 2 I2C-HID
devices its main touchscreen and a Wacom digitizer. Its main touchscreen
can alternatively also be used in HiDeep's native protocol mode but
for the Wacom digitizer we really need I2C-HID.
This patch allows using i2c-hid-of on non OF platforms so that it can
bind to a non ACPI instantiated i2c_client on x86 for the Wacom digitizer.
Note the driver already has an "i2c-over-hid" i2c_device_id (rather then
an of_device_id).
Besides enabling building on non-OF platforms this also replaces
the only of_property_read_u32() call with device_property_read_u32() note
that other properties where already read using device_property_read_...().
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/hid/i2c-hid/Kconfig | 6 ++++--
drivers/hid/i2c-hid/i2c-hid-of.c | 4 +++-
2 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/hid/i2c-hid/Kconfig b/drivers/hid/i2c-hid/Kconfig
index 4439be7fa74d..3be17109301a 100644
--- a/drivers/hid/i2c-hid/Kconfig
+++ b/drivers/hid/i2c-hid/Kconfig
@@ -23,12 +23,14 @@ config I2C_HID_ACPI
config I2C_HID_OF
tristate "HID over I2C transport layer Open Firmware driver"
- depends on OF
+ # No "depends on OF" because this can also be used for manually
+ # (board-file) instantiated "hid-over-i2c" type i2c-clients.
select I2C_HID_CORE
help
Say Y here if you use a keyboard, a touchpad, a touchscreen, or any
other HID based devices which is connected to your computer via I2C.
- This driver supports Open Firmware (Device Tree)-based systems.
+ This driver supports Open Firmware (Device Tree)-based systems as
+ well as binding to manually (board-file) instantiated i2c-hid-clients.
If unsure, say N.
diff --git a/drivers/hid/i2c-hid/i2c-hid-of.c b/drivers/hid/i2c-hid/i2c-hid-of.c
index c82a5a54c3e6..385f7460e03c 100644
--- a/drivers/hid/i2c-hid/i2c-hid-of.c
+++ b/drivers/hid/i2c-hid/i2c-hid-of.c
@@ -82,7 +82,7 @@ static int i2c_hid_of_probe(struct i2c_client *client)
ihid_of->ops.power_up = i2c_hid_of_power_up;
ihid_of->ops.power_down = i2c_hid_of_power_down;
- ret = of_property_read_u32(dev->of_node, "hid-descr-addr", &val);
+ ret = device_property_read_u32(dev, "hid-descr-addr", &val);
if (ret) {
dev_err(dev, "HID register address not provided\n");
return -ENODEV;
@@ -113,11 +113,13 @@ static int i2c_hid_of_probe(struct i2c_client *client)
hid_descriptor_address, quirks);
}
+#ifdef CONFIG_OF
static const struct of_device_id i2c_hid_of_match[] = {
{ .compatible = "hid-over-i2c" },
{},
};
MODULE_DEVICE_TABLE(of, i2c_hid_of_match);
+#endif
static const struct i2c_device_id i2c_hid_of_id_table[] = {
{ "hid", 0 },
--
2.39.1
