Re: [PATCH v2 3/3] arm64: dts: qcom: sdm845-oneplus: add tri-state-key

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 10.02.2023 14:45, Gergo Koteles wrote:
> On 2023. 02. 10. 12:33, Krzysztof Kozlowski wrote:
>> On 10/02/2023 00:25, Gergo Koteles wrote:
>>> The tri-state-key is a sound profile switch found on the OnePlus 6,
>>> Android maps the states to "mute", "vibrate" and "ring". Expose them as
>>> ABS_SND_PROFILE events.
>>> The previous GPIO numbers were wrong. Update them to the correct
>>> ones.
>>>
>>> Co-developed-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>
>>> Signed-off-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>
>>> Signed-off-by: Gergo Koteles <soyer@xxxxxx>
>>
>> Where are other patches? I got only 3/3.
>>
> Hi Krzysztof,
> 
> Sorry, I missed the --thread option for git format-patch.
> 
>>> ---
>>>   .../boot/dts/qcom/sdm845-oneplus-common.dtsi  | 39 ++++++++++++++++++-
>>>   1 file changed, 38 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
>>> index 64638ea94db7..e45d4fdead82 100644
>>> --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
>>> @@ -52,6 +52,43 @@ key-vol-up {
>>>           };
>>>       };
>>>   +    tri-state-key {
>>> +        compatible = "gpio-keys";
>>> +        label = "Tri-state key";
>>> +        pinctrl-names = "default";
>>> +        pinctrl-0 = <&tri_state_key_default>;
>>
>> Missing blank line.
>>
> 
> I'll add it to v3.
While at it, please put pinctrl-names after pinctrl-0.

> 
>>> +        state-top {
>>
>> Does not look like you tested the DTS against bindings. Please run `make
>> dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
>> for instructions).
>>
> 
> I ran dtbs_check with DT_SCHEMA_FILES=Documentation/devicetree/bindings/arm/qcom.yaml. It only shows warnings for msm8996-oneplus3, but not for sdm845-oneplus phones. Is there anything else I need to check?
You're only checking against a schema file which validates msm-id and
machine compatibles. The goal is to not introduce *any* new warnings.

You want to run:

make (your make args) CHECK_DTBS=1 qcom/sdm845-oneplus-enchilada.dtb

pre and post your patch.

Konrad

> 
> 
> ...
> arch/arm64/boot/dts/qcom/msm8996-oneplus3.dtb: /: qcom,board-id: 'oneOf' conditional failed, one must be fixed:
>     [8, 0, 15801, 15, 8, 0, 15801, 16] is too long
>     From schema: /Documentation/devicetree/bindings/arm/qcom.yaml
> ...
>   DTC_CHK arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dtb
>   DTC_CHK arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dtb
> 
> 
> Thanks,
> Gergo
> 
>>
>> Best regards,
>> Krzysztof
>>
> 



[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux