On Sat, Nov 19, 2022 at 22:21, Fabio Estevam <festevam@xxxxxxxxx> wrote:
> From: Fabio Estevam <festevam@xxxxxxx>
>
> Convert the bindings from plain text to yaml schema.
>
> Signed-off-by: Fabio Estevam <festevam@xxxxxxx>
Small nit below, but I don't think it matters, so:
Reviewed-by: Mattijs Korpershoek <mkorpershoek@xxxxxxxxxxxx>
> ---
> .../devicetree/bindings/input/gpio-beeper.txt | 13 --------
> .../bindings/input/gpio-beeper.yaml | 33 +++++++++++++++++++
> 2 files changed, 33 insertions(+), 13 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/input/gpio-beeper.txt
> create mode 100644 Documentation/devicetree/bindings/input/gpio-beeper.yaml
>
> diff --git a/Documentation/devicetree/bindings/input/gpio-beeper.txt b/Documentation/devicetree/bindings/input/gpio-beeper.txt
> deleted file mode 100644
> index a5086e37fce6..000000000000
> --- a/Documentation/devicetree/bindings/input/gpio-beeper.txt
> +++ /dev/null
> @@ -1,13 +0,0 @@
> -* GPIO beeper device tree bindings
> -
> -Register a beeper connected to GPIO pin.
> -
> -Required properties:
> -- compatible: Should be "gpio-beeper".
> -- gpios: From common gpio binding; gpio connection to beeper enable pin.
> -
> -Example:
> - beeper: beeper {
> - compatible = "gpio-beeper";
> - gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
> - };
> diff --git a/Documentation/devicetree/bindings/input/gpio-beeper.yaml b/Documentation/devicetree/bindings/input/gpio-beeper.yaml
> new file mode 100644
> index 000000000000..5fd57a8940df
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/gpio-beeper.yaml
> @@ -0,0 +1,33 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/gpio-beeper.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: GPIO controlled beeper
> +
> +maintainers:
> + - Fabio Estevam <festevam@xxxxxxx>
> +
> +properties:
> + compatible:
> + const: gpio-beeper
> +
> + gpios:
> + maxItems: 1
> + description:
> + GPIO that drives the beeper.
We can join these lines:
description: GPIO that drives the beeper.
> +
> +required:
> + - compatible
> + - gpios
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + beeper {
> + compatible = "gpio-beeper";
> + gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
> + };
> --
> 2.25.1
