[Adding Angus and David]
On Mon, Nov 21, 2022 at 3:12 PM Quentin Schulz <foss+kernel@xxxxxxxxx> wrote:
>
> From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>
>
> The reset line is active low for the Goodix touchscreen controller so
> let's fix the polarity in the Device Tree node.
>
> Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts | 2 +-
> arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts
> index 9fbbbb556c0b3..df7e5ae9698e1 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts
> @@ -107,7 +107,7 @@ touchscreeen@5d {
> interrupt-parent = <&gpio1>;
> interrupts = <8 IRQ_TYPE_NONE>;
> irq-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
> - reset-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
> + reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
> };
>
> temp-sense@70 {
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> index 6445c6b90b5bb..b038300812b1e 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> @@ -542,7 +542,7 @@ touchscreen@5d {
> pinctrl-0 = <&pinctrl_ts>;
> interrupt-parent = <&gpio3>;
> interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> - reset-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
> + reset-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
> irq-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
> touchscreen-size-x = <720>;
> touchscreen-size-y = <1440>;
>
> --
> b4 0.10.1
