VRC-2 is 2-axis controller often used in car simulators.
Signed-off-by: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
---
MAINTAINERS | 6 +++
drivers/hid/Kconfig | 10 +++++
drivers/hid/Makefile | 1 +
drivers/hid/hid-vrc2.c | 91 ++++++++++++++++++++++++++++++++++++++++++
4 files changed, 108 insertions(+)
create mode 100644 drivers/hid/hid-vrc2.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 216b9f021f72..33010f93c993 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8919,6 +8919,12 @@ F: drivers/hid/hid-sensor-*
F: drivers/iio/*/hid-*
F: include/linux/hid-sensor-*
+HID VRC-2 CAR CONTROLLER DRIVER
+M: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
+L: linux-input@xxxxxxxxxxxxxxx
+S: Maintained
+F: drivers/hid/hid-vrc2.c
+
HID WACOM DRIVER
M: Ping Cheng <ping.cheng@xxxxxxxxx>
M: Jason Gerecke <jason.gerecke@xxxxxxxxx>
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index d8313d36086c..910cfbaca768 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -481,6 +481,16 @@ config HID_VIEWSONIC
help
Support for ViewSonic/Signotec PD1011 signature pad.
+config HID_VRC2
+ tristate "VRC-2 Car Controller"
+ depends on HID
+ help
+ Support for VRC-2 which is a 2-axis controller often used in
+ car simulators.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hid-vrc2.
+
config HID_XIAOMI
tristate "Xiaomi"
depends on HID
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 85d50ab352ee..32ab85b1a776 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -137,6 +137,7 @@ obj-$(CONFIG_HID_XINMO) += hid-xinmo.o
obj-$(CONFIG_HID_ZEROPLUS) += hid-zpff.o
obj-$(CONFIG_HID_ZYDACRON) += hid-zydacron.o
obj-$(CONFIG_HID_VIEWSONIC) += hid-viewsonic.o
+obj-$(CONFIG_HID_VRC2) += hid-vrc2.o
wacom-objs := wacom_wac.o wacom_sys.o
obj-$(CONFIG_HID_WACOM) += wacom.o
diff --git a/drivers/hid/hid-vrc2.c b/drivers/hid/hid-vrc2.c
new file mode 100644
index 000000000000..80a2b7ef5e66
--- /dev/null
+++ b/drivers/hid/hid-vrc2.c
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * HID driver for VRC-2 2-axis Car controller
+ *
+ * Copyright (C) 2022 Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+/*
+ * VID/PID are probably "borrowed", so keep them locally and
+ * do not populate hid-ids.h with those.
+ */
+#define USB_VENDOR_ID_VRC2 (0x07c0)
+#define USB_DEVICE_ID_VRC2 (0x1125)
+
+static __u8 vrc2_rdesc_fixed[] = {
+ 0x05, 0x01, // Usage Page (Generic Desktop Ctrls)
+ 0x09, 0x04, // Usage (Joystick)
+ 0xA1, 0x01, // Collection (Application)
+ 0x09, 0x01, // Usage (Pointer)
+ 0xA1, 0x00, // Collection (Physical)
+ 0x09, 0x30, // Usage (X)
+ 0x09, 0x31, // Usage (Y)
+ 0x15, 0x00, // Logical Minimum (0)
+ 0x26, 0xFF, 0x07, // Logical Maximum (2047)
+ 0x35, 0x00, // Physical Minimum (0)
+ 0x46, 0xFF, 0x00, // Physical Maximum (255)
+ 0x75, 0x10, // Report Size (16)
+ 0x95, 0x02, // Report Count (2)
+ 0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position)
+ 0xC0, // End Collection
+ 0x75, 0x08, // Report Size (8)
+ 0x95, 0x03, // Report Count (3)
+ 0x81, 0x03, // Input (Cnst,Var,Abs)
+ 0xC0, // End Collection
+};
+
+static __u8 *vrc2_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+ unsigned int *rsize)
+{
+ hid_info(hdev, "fixing up VRC-2 report descriptor\n");
+ *rsize = sizeof(vrc2_rdesc_fixed);
+ return vrc2_rdesc_fixed;
+}
+
+static int vrc2_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ int ret;
+
+ /*
+ * The device gives us 2 separate USB endpoints.
+ * One of those (the one with report descriptor size of 23) is just bogus so ignore it
+ */
+ if (hdev->dev_rsize == 23)
+ return -ENODEV;
+
+ ret = hid_parse(hdev);
+ if (ret) {
+ hid_err(hdev, "parse failed\n");
+ return ret;
+ }
+
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+ if (ret) {
+ hid_err(hdev, "hw start failed\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct hid_device_id vrc2_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_VRC2, USB_DEVICE_ID_VRC2) },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(hid, vrc2_devices);
+
+static struct hid_driver vrc2_driver = {
+ .name = "vrc2",
+ .id_table = vrc2_devices,
+ .report_fixup = vrc2_report_fixup,
+ .probe = vrc2_probe,
+};
+module_hid_driver(vrc2_driver);
+
+MODULE_AUTHOR("Marcus Folkesson <marcus.folkesson@xxxxxxxxx>");
+MODULE_DESCRIPTION("HID driver for VRC-2 2-axis Car controller");
+MODULE_LICENSE("GPL");
--
2.37.1
