Re: [PATCH v2 3/5] dt-bindings: gpio: stmpe: Remove node name requirement

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Bartosz, can you pick this? Patches 1 and 2 were applied to MFD
tree.

On Tue, Jul 12, 2022 at 06:33:43PM +0200, Francesco Dolcini wrote:
> STMPE driver does not require a specific node name anymore, only the
> compatible is checked, update binding according to this.
> 
> Signed-off-by: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/gpio/gpio-stmpe.txt | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
> index a0e4cf885213..b33f8f02c0d7 100644
> --- a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
> +++ b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
> @@ -8,8 +8,7 @@ Optional properties:
>   - st,norequest-mask: bitmask specifying which GPIOs should _not_ be requestable
>     due to different usage (e.g. touch, keypad)
>  
> -Node name must be stmpe_gpio and should be child node of stmpe node to which it
> -belongs.
> +Node should be child node of stmpe node to which it belongs.
>  
>  Example:
>  	stmpe_gpio {
> -- 
> 2.25.1
> 




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux