From: Marge Yang <marge.yang@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
The interrupt GPIO will be pulled down once
after RMI driver reads this command(Report ID:0x0A).
It will cause "Dark resume test fail" for chromebook device.
Hence, TP driver will ignore rmi_hid_read_block function once
after system resumes.
Signed-off-by: Marge Yang<marge.yang@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
drivers/hid/hid-rmi.c | 14 ++++++++++++--
include/linux/rmi.h | 2 ++
2 files changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c
index 311eee599ce9..b08b74b0c140 100644
--- a/drivers/hid/hid-rmi.c
+++ b/drivers/hid/hid-rmi.c
@@ -203,7 +203,13 @@ static int rmi_hid_read_block(struct rmi_transport_dev *xport, u16 addr,
if (ret < 0)
goto exit;
}
-
+ if ((!!xport) && (xport->ignoreonce == 1)) {
+ dev_err(&hdev->dev,
+ "ignoreonce (%d)\n",
+ xport->ignoreonce);
+ xport->ignoreonce = 0;
+ goto exit;
+ }
for (retries = 5; retries > 0; retries--) {
data->writeReport[0] = RMI_READ_ADDR_REPORT_ID;
data->writeReport[1] = 0; /* old 1 byte read count */
@@ -468,8 +474,12 @@ static int rmi_post_resume(struct hid_device *hdev)
ret = hid_hw_open(hdev);
if (ret)
return ret;
-
+ // Avoid to read rmi_hid_read_block once after system resumes.
+ // The interrupt will be pulled down
+ // after RMI Read command(Report ID:0x0A).
+ data->xport.ignoreonce = 1;
ret = rmi_reset_attn_mode(hdev);
+ data->xport.ignoreonce = 0;
if (ret)
goto out;
diff --git a/include/linux/rmi.h b/include/linux/rmi.h
index ab7eea01ab42..24f63ad00970 100644
--- a/include/linux/rmi.h
+++ b/include/linux/rmi.h
@@ -270,6 +270,8 @@ struct rmi_transport_dev {
struct rmi_device_platform_data pdata;
struct input_dev *input;
+
+ int ignoreonce;
};
/**
--
2.22.0.windows.1
