On Tue, Jun 21, 2022 at 02:39:31PM +0200, Dario Binacchi wrote: > The series was born from the analysis and mitigation of a crc problem > raised by an M06 type device. The added sysfs attributes were helpful > in debugging the problem. Patches that change the report rate on driver > probing, mitigated crc errors on kernel bootup. The patch to get/set > report rate by sysfs for an M12 device, has been tested. > > Changes in v4: > - Add Rob Herring 'Acked-by' tag. > > Changes in v3: > - Add hz unit suffix. > - Add '|' to description. > - Check the lower and upper limits of the report-rate-hz value > - Convert the M06 report-rate-hz value > > Changes in v2: > - Add Oliver Graute's 'Acked-by' tag to: > * Input: edt-ft5x06 - show model name by sysfs > * Input: edt-ft5x06 - show firmware version by sysfs > - Fix yaml file. Tested with `make DT_CHECKER_FLAGS=-m dt_binding_check'. > > Dario Binacchi (6): > dt-bindings: input: touchscreen: edt-ft5x06: add report-rate-hz > Input: edt-ft5x06 - get/set M12 report rate by sysfs > Input: edt-ft5x06 - set report rate by dts property > Input: edt-ft5x06 - show model name by sysfs > Input: edt-ft5x06 - show firmware version by sysfs > Input: edt-ft5x06 - show crc and header errors by sysfs > > .../input/touchscreen/edt-ft5x06.yaml | 8 ++ > drivers/input/touchscreen/edt-ft5x06.c | 103 ++++++++++++++++-- > 2 files changed, 103 insertions(+), 8 deletions(-) Applied the lot with a few small adjustments, thank you. -- Dmitry
