The MediaTek keypad has a total of 6 input rows and 6 input columns. By default, rows/columns 0-2 are enabled. This is controlled by the KP_SEL register: - bits[9:4] control row selection - bits[15:10] control column selection Each bit enables the corresponding row/column number (e.g KP_SEL[4] enables ROW0) Depending on how the keypad is wired, this may result in wrong readings of the keypad state. Program the KP_SEL register to limit the key detection to n_rows, n_cols we retrieve from the device tree. Signed-off-by: Mattijs Korpershoek <mkorpershoek@xxxxxxxxxxxx> --- drivers/input/keyboard/mt6779-keypad.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/input/keyboard/mt6779-keypad.c b/drivers/input/keyboard/mt6779-keypad.c index bd86cb95bde3..bf447bf598fb 100644 --- a/drivers/input/keyboard/mt6779-keypad.c +++ b/drivers/input/keyboard/mt6779-keypad.c @@ -17,6 +17,11 @@ #define MTK_KPD_DEBOUNCE 0x0018 #define MTK_KPD_DEBOUNCE_MASK GENMASK(13, 0) #define MTK_KPD_DEBOUNCE_MAX_MS 256 +#define MTK_KPD_SEL 0x0020 +#define MTK_KPD_SEL_COL GENMASK(15, 10) +#define MTK_KPD_SEL_ROW GENMASK(9, 4) +#define MTK_KPD_SEL_COLMASK(c) GENMASK((c) + 9, 10) +#define MTK_KPD_SEL_ROWMASK(r) GENMASK((r) + 3, 4) #define MTK_KPD_NUM_MEMS 5 #define MTK_KPD_NUM_BITS 136 /* 4*32+8 MEM5 only use 8 BITS */ @@ -161,6 +166,11 @@ static int mt6779_keypad_pdrv_probe(struct platform_device *pdev) regmap_write(keypad->regmap, MTK_KPD_DEBOUNCE, (debounce * (1 << 5)) & MTK_KPD_DEBOUNCE_MASK); + regmap_update_bits(keypad->regmap, MTK_KPD_SEL, MTK_KPD_SEL_ROW, + MTK_KPD_SEL_ROWMASK(keypad->n_rows)); + regmap_update_bits(keypad->regmap, MTK_KPD_SEL, MTK_KPD_SEL_COL, + MTK_KPD_SEL_COLMASK(keypad->n_cols)); + keypad->clk = devm_clk_get(&pdev->dev, "kpd"); if (IS_ERR(keypad->clk)) return PTR_ERR(keypad->clk); -- 2.34.1
