Re: [PATCH 21/41] ARM: omap1: dma: remove omap2 specific bits

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 4/19/22 16:37, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@xxxxxxxx>
> 
> No part of plat-omap/dma.c is called on omap2 any more, so
> anything omap2 specific in here can simply be removed.

Reviewed-by: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>

> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
> ---
>  arch/arm/plat-omap/dma.c | 217 ++++++++++-----------------------------
>  1 file changed, 55 insertions(+), 162 deletions(-)
> 
> diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
> index b7757864d0aa..eb14528f133c 100644
> --- a/arch/arm/plat-omap/dma.c
> +++ b/arch/arm/plat-omap/dma.c
> @@ -34,11 +34,9 @@
>  
>  #include <linux/omap-dma.h>
>  
> -#ifdef CONFIG_ARCH_OMAP1
>  #include <mach/hardware.h>
>  #include <linux/soc/ti/omap1-io.h>
>  #include <linux/soc/ti/omap1-soc.h>
> -#endif
>  
>  /*
>   * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
> @@ -51,16 +49,7 @@
>  
>  #undef DEBUG
>  
> -#ifndef CONFIG_ARCH_OMAP1
> -enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED,
> -	DMA_CH_QUEUED, DMA_CH_NOTSTARTED, DMA_CH_PAUSED, DMA_CH_LINK_ENABLED
> -};
> -
> -enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
> -#endif
> -
>  #define OMAP_DMA_ACTIVE			0x01
> -#define OMAP2_DMA_CSR_CLEAR_MASK	0xffffffff
>  
>  #define OMAP_FUNC_MUX_ARM_BASE		(0xfffe1000 + 0xec)
>  
> @@ -94,13 +83,9 @@ static inline void omap_disable_channel_irq(int lch)
>  	/* disable channel interrupts */
>  	p->dma_write(0, CICR, lch);
>  	/* Clear CSR */
> -	if (dma_omap1())
> -		p->dma_read(CSR, lch);
> -	else
> -		p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
> +	p->dma_read(CSR, lch);
>  }
>  
> -#ifdef CONFIG_ARCH_OMAP1
>  static inline void set_gdma_dev(int req, int dev)
>  {
>  	u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
> @@ -112,11 +97,6 @@ static inline void set_gdma_dev(int req, int dev)
>  	l |= (dev - 1) << shift;
>  	omap_writel(l, reg);
>  }
> -#else
> -#define set_gdma_dev(req, dev)	do {} while (0)
> -#define omap_readl(reg)		0
> -#define omap_writel(val, reg)	do {} while (0)
> -#endif
>  
>  #ifdef CONFIG_ARCH_OMAP1
>  void omap_set_dma_priority(int lch, int dst_port, int priority)
> @@ -181,59 +161,24 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
>  				  int dma_trigger, int src_or_dst_synch)
>  {
>  	u32 l;
> +	u16 ccr;
>  
>  	l = p->dma_read(CSDP, lch);
>  	l &= ~0x03;
>  	l |= data_type;
>  	p->dma_write(l, CSDP, lch);
>  
> -	if (dma_omap1()) {
> -		u16 ccr;
> -
> -		ccr = p->dma_read(CCR, lch);
> -		ccr &= ~(1 << 5);
> -		if (sync_mode == OMAP_DMA_SYNC_FRAME)
> -			ccr |= 1 << 5;
> -		p->dma_write(ccr, CCR, lch);
> -
> -		ccr = p->dma_read(CCR2, lch);
> -		ccr &= ~(1 << 2);
> -		if (sync_mode == OMAP_DMA_SYNC_BLOCK)
> -			ccr |= 1 << 2;
> -		p->dma_write(ccr, CCR2, lch);
> -	}
> -
> -	if (dma_omap2plus() && dma_trigger) {
> -		u32 val;
> -
> -		val = p->dma_read(CCR, lch);
> -
> -		/* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */
> -		val &= ~((1 << 23) | (3 << 19) | 0x1f);
> -		val |= (dma_trigger & ~0x1f) << 14;
> -		val |= dma_trigger & 0x1f;
> -
> -		if (sync_mode & OMAP_DMA_SYNC_FRAME)
> -			val |= 1 << 5;
> -		else
> -			val &= ~(1 << 5);
> -
> -		if (sync_mode & OMAP_DMA_SYNC_BLOCK)
> -			val |= 1 << 18;
> -		else
> -			val &= ~(1 << 18);
> -
> -		if (src_or_dst_synch == OMAP_DMA_DST_SYNC_PREFETCH) {
> -			val &= ~(1 << 24);	/* dest synch */
> -			val |= (1 << 23);	/* Prefetch */
> -		} else if (src_or_dst_synch) {
> -			val |= 1 << 24;		/* source synch */
> -		} else {
> -			val &= ~(1 << 24);	/* dest synch */
> -		}
> -		p->dma_write(val, CCR, lch);
> -	}
> +	ccr = p->dma_read(CCR, lch);
> +	ccr &= ~(1 << 5);
> +	if (sync_mode == OMAP_DMA_SYNC_FRAME)
> +		ccr |= 1 << 5;
> +	p->dma_write(ccr, CCR, lch);
>  
> +	ccr = p->dma_read(CCR2, lch);
> +	ccr &= ~(1 << 2);
> +	if (sync_mode == OMAP_DMA_SYNC_BLOCK)
> +		ccr |= 1 << 2;
> +	p->dma_write(ccr, CCR2, lch);
>  	p->dma_write(elem_count, CEN, lch);
>  	p->dma_write(frame_count, CFN, lch);
>  }
> @@ -241,7 +186,7 @@ EXPORT_SYMBOL(omap_set_dma_transfer_params);
>  
>  void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
>  {
> -	if (dma_omap1() && !dma_omap15xx()) {
> +	if (!dma_omap15xx()) {
>  		u32 l;
>  
>  		l = p->dma_read(LCH_CTRL, lch);
> @@ -258,15 +203,12 @@ void omap_set_dma_src_params(int lch, int src_port, int src_amode,
>  			     int src_ei, int src_fi)
>  {
>  	u32 l;
> +	u16 w;
>  
> -	if (dma_omap1()) {
> -		u16 w;
> -
> -		w = p->dma_read(CSDP, lch);
> -		w &= ~(0x1f << 2);
> -		w |= src_port << 2;
> -		p->dma_write(w, CSDP, lch);
> -	}
> +	w = p->dma_read(CSDP, lch);
> +	w &= ~(0x1f << 2);
> +	w |= src_port << 2;
> +	p->dma_write(w, CSDP, lch);
>  
>  	l = p->dma_read(CCR, lch);
>  	l &= ~(0x03 << 12);
> @@ -304,26 +246,15 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
>  	case OMAP_DMA_DATA_BURST_DIS:
>  		break;
>  	case OMAP_DMA_DATA_BURST_4:
> -		if (dma_omap2plus())
> -			burst = 0x1;
> -		else
> -			burst = 0x2;
> +		burst = 0x2;
>  		break;
>  	case OMAP_DMA_DATA_BURST_8:
> -		if (dma_omap2plus()) {
> -			burst = 0x2;
> -			break;
> -		}
>  		/*
>  		 * not supported by current hardware on OMAP1
>  		 * w |= (0x03 << 7);
>  		 */
>  		fallthrough;
>  	case OMAP_DMA_DATA_BURST_16:
> -		if (dma_omap2plus()) {
> -			burst = 0x3;
> -			break;
> -		}
>  		/* OMAP1 don't support burst 16 */
>  		fallthrough;
>  	default:
> @@ -342,12 +273,10 @@ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
>  {
>  	u32 l;
>  
> -	if (dma_omap1()) {
> -		l = p->dma_read(CSDP, lch);
> -		l &= ~(0x1f << 9);
> -		l |= dest_port << 9;
> -		p->dma_write(l, CSDP, lch);
> -	}
> +	l = p->dma_read(CSDP, lch);
> +	l &= ~(0x1f << 9);
> +	l |= dest_port << 9;
> +	p->dma_write(l, CSDP, lch);
>  
>  	l = p->dma_read(CCR, lch);
>  	l &= ~(0x03 << 14);
> @@ -385,22 +314,12 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
>  	case OMAP_DMA_DATA_BURST_DIS:
>  		break;
>  	case OMAP_DMA_DATA_BURST_4:
> -		if (dma_omap2plus())
> -			burst = 0x1;
> -		else
> -			burst = 0x2;
> +		burst = 0x2;
>  		break;
>  	case OMAP_DMA_DATA_BURST_8:
> -		if (dma_omap2plus())
> -			burst = 0x2;
> -		else
> -			burst = 0x3;
> +		burst = 0x3;
>  		break;
>  	case OMAP_DMA_DATA_BURST_16:
> -		if (dma_omap2plus()) {
> -			burst = 0x3;
> -			break;
> -		}
>  		/* OMAP1 don't support burst 16 */
>  		fallthrough;
>  	default:
> @@ -416,10 +335,7 @@ EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
>  static inline void omap_enable_channel_irq(int lch)
>  {
>  	/* Clear CSR */
> -	if (dma_omap1())
> -		p->dma_read(CSR, lch);
> -	else
> -		p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
> +	p->dma_read(CSR, lch);
>  
>  	/* Enable some nice interrupts. */
>  	p->dma_write(dma_chan[lch].enabled_irqs, CICR, lch);
> @@ -437,8 +353,7 @@ static inline void enable_lnk(int lch)
>  
>  	l = p->dma_read(CLNK_CTRL, lch);
>  
> -	if (dma_omap1())
> -		l &= ~(1 << 14);
> +	l &= ~(1 << 14);
>  
>  	/* Set the ENABLE_LNK bits */
>  	if (dma_chan[lch].next_lch != -1)
> @@ -456,15 +371,8 @@ static inline void disable_lnk(int lch)
>  	/* Disable interrupts */
>  	omap_disable_channel_irq(lch);
>  
> -	if (dma_omap1()) {
> -		/* Set the STOP_LNK bit */
> -		l |= 1 << 14;
> -	}
> -
> -	if (dma_omap2plus()) {
> -		/* Clear the ENABLE_LNK bit */
> -		l &= ~(1 << 15);
> -	}
> +	/* Set the STOP_LNK bit */
> +	l |= 1 << 14;
>  
>  	p->dma_write(l, CLNK_CTRL, lch);
>  	dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
> @@ -508,8 +416,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
>  
>  	chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
>  
> -	if (dma_omap1())
> -		chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
> +	chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
>  
>  	if (dma_omap16xx()) {
>  		/* If the sync device is set, configure it dynamically. */
> @@ -522,7 +429,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
>  		 * id.
>  		 */
>  		p->dma_write(dev_id | (1 << 10), CCR, free_ch);
> -	} else if (dma_omap1()) {
> +	} else {
>  		p->dma_write(dev_id, CCR, free_ch);
>  	}
>  
> @@ -739,8 +646,7 @@ dma_addr_t omap_get_dma_src_pos(int lch)
>  			offset = p->dma_read(CSSA, lch);
>  	}
>  
> -	if (dma_omap1())
> -		offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000);
> +	offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000);
>  
>  	return offset;
>  }
> @@ -778,8 +684,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch)
>  			offset = p->dma_read(CDSA, lch);
>  	}
>  
> -	if (dma_omap1())
> -		offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000);
> +	offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000);
>  
>  	return offset;
>  }
> @@ -796,9 +701,8 @@ int omap_dma_running(void)
>  {
>  	int lch;
>  
> -	if (dma_omap1())
> -		if (omap_lcd_dma_running())
> -			return 1;
> +	if (omap_lcd_dma_running())
> +		return 1;
>  
>  	for (lch = 0; lch < dma_chan_count; lch++)
>  		if (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN)
> @@ -809,8 +713,6 @@ int omap_dma_running(void)
>  
>  /*----------------------------------------------------------------------------*/
>  
> -#ifdef CONFIG_ARCH_OMAP1
> -
>  static int omap1_dma_handle_ch(int ch)
>  {
>  	u32 csr;
> @@ -863,10 +765,6 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
>  	return handled ? IRQ_HANDLED : IRQ_NONE;
>  }
>  
> -#else
> -#define omap1_dma_irq_handler	NULL
> -#endif
> -
>  struct omap_system_dma_plat_info *omap_get_plat_info(void)
>  {
>  	return p;
> @@ -912,29 +810,27 @@ static int omap_system_dma_probe(struct platform_device *pdev)
>  		if (ch >= 6 && enable_1510_mode)
>  			continue;
>  
> -		if (dma_omap1()) {
> -			/*
> -			 * request_irq() doesn't like dev_id (ie. ch) being
> -			 * zero, so we have to kludge around this.
> -			 */
> -			sprintf(&irq_name[0], "%d", ch);
> -			dma_irq = platform_get_irq_byname(pdev, irq_name);
> -
> -			if (dma_irq < 0) {
> -				ret = dma_irq;
> -				goto exit_dma_irq_fail;
> -			}
> -
> -			/* INT_DMA_LCD is handled in lcd_dma.c */
> -			if (dma_irq == INT_DMA_LCD)
> -				continue;
> -
> -			ret = request_irq(dma_irq,
> -					omap1_dma_irq_handler, 0, "DMA",
> -					(void *) (ch + 1));
> -			if (ret != 0)
> -				goto exit_dma_irq_fail;
> +		/*
> +		 * request_irq() doesn't like dev_id (ie. ch) being
> +		 * zero, so we have to kludge around this.
> +		 */
> +		sprintf(&irq_name[0], "%d", ch);
> +		dma_irq = platform_get_irq_byname(pdev, irq_name);
> +
> +		if (dma_irq < 0) {
> +			ret = dma_irq;
> +			goto exit_dma_irq_fail;
>  		}
> +
> +		/* INT_DMA_LCD is handled in lcd_dma.c */
> +		if (dma_irq == INT_DMA_LCD)
> +			continue;
> +
> +		ret = request_irq(dma_irq,
> +				omap1_dma_irq_handler, 0, "DMA",
> +				(void *) (ch + 1));
> +		if (ret != 0)
> +			goto exit_dma_irq_fail;
>  	}
>  
>  	/* reserve dma channels 0 and 1 in high security devices on 34xx */
> @@ -954,9 +850,6 @@ static int omap_system_dma_remove(struct platform_device *pdev)
>  {
>  	int dma_irq, irq_rel = 0;
>  
> -	if (dma_omap2plus())
> -		return 0;
> -
>  	for ( ; irq_rel < dma_chan_count; irq_rel++) {
>  		dma_irq = platform_get_irq(pdev, irq_rel);
>  		free_irq(dma_irq, (void *)(irq_rel + 1));

-- 
Péter



[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux