To avoid several steps of dereferencing the struct device from
the client, add a struct device *dev pointer to the state
container so we can easily get to the struct device. This makes
the code more compact and easier to read.
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
drivers/input/touchscreen/zinitix.c | 37 +++++++++++++++--------------
1 file changed, 19 insertions(+), 18 deletions(-)
diff --git a/drivers/input/touchscreen/zinitix.c b/drivers/input/touchscreen/zinitix.c
index cd13075ae3ab..11af1264cafa 100644
--- a/drivers/input/touchscreen/zinitix.c
+++ b/drivers/input/touchscreen/zinitix.c
@@ -142,6 +142,7 @@ struct touch_event {
struct bt541_ts_data {
struct i2c_client *client;
+ struct device *dev;
struct input_dev *input_dev;
struct touchscreen_properties prop;
struct regulator_bulk_data supplies[2];
@@ -198,13 +199,13 @@ static int zinitix_init_touch(struct bt541_ts_data *bt541)
error = zinitix_write_cmd(client, BT541_SWRESET_CMD);
if (error) {
- dev_err(&client->dev, "Failed to write reset command\n");
+ dev_err(bt541->dev, "Failed to write reset command\n");
return error;
}
error = zinitix_write_u16(client, BT541_INT_ENABLE_FLAG, 0x0);
if (error) {
- dev_err(&client->dev,
+ dev_err(bt541->dev,
"Failed to reset interrupt enable flag\n");
return error;
}
@@ -252,7 +253,7 @@ static int zinitix_init_touch(struct bt541_ts_data *bt541)
static int zinitix_init_regulators(struct bt541_ts_data *bt541)
{
- struct device *dev = &bt541->client->dev;
+ struct device *dev = bt541->dev;
int error;
/*
@@ -286,7 +287,7 @@ static int zinitix_send_power_on_sequence(struct bt541_ts_data *bt541)
error = zinitix_write_u16(client, 0xc000, 0x0001);
if (error) {
- dev_err(&client->dev,
+ dev_err(bt541->dev,
"Failed to send power sequence(vendor cmd enable)\n");
return error;
}
@@ -294,7 +295,7 @@ static int zinitix_send_power_on_sequence(struct bt541_ts_data *bt541)
error = zinitix_write_cmd(client, 0xc004);
if (error) {
- dev_err(&client->dev,
+ dev_err(bt541->dev,
"Failed to send power sequence (intn clear)\n");
return error;
}
@@ -302,7 +303,7 @@ static int zinitix_send_power_on_sequence(struct bt541_ts_data *bt541)
error = zinitix_write_u16(client, 0xc002, 0x0001);
if (error) {
- dev_err(&client->dev,
+ dev_err(bt541->dev,
"Failed to send power sequence (nvm init)\n");
return error;
}
@@ -310,7 +311,7 @@ static int zinitix_send_power_on_sequence(struct bt541_ts_data *bt541)
error = zinitix_write_u16(client, 0xc001, 0x0001);
if (error) {
- dev_err(&client->dev,
+ dev_err(bt541->dev,
"Failed to send power sequence (program start)\n");
return error;
}
@@ -353,7 +354,6 @@ static void zinitix_report_finger(struct bt541_ts_data *bt541, int slot,
static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler)
{
struct bt541_ts_data *bt541 = bt541_handler;
- struct i2c_client *client = bt541->client;
struct touch_event touch_event;
unsigned long finger_mask;
int error;
@@ -364,7 +364,7 @@ static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler)
error = zinitix_read_data(bt541->client, BT541_POINT_STATUS_REG,
&touch_event, sizeof(struct touch_event));
if (error) {
- dev_err(&client->dev, "Failed to read in touchpoint struct\n");
+ dev_err(bt541->dev, "Failed to read in touchpoint struct\n");
goto out;
}
@@ -392,7 +392,7 @@ static int zinitix_start(struct bt541_ts_data *bt541)
error = regulator_bulk_enable(ARRAY_SIZE(bt541->supplies),
bt541->supplies);
if (error) {
- dev_err(&bt541->client->dev,
+ dev_err(bt541->dev,
"Failed to enable regulators: %d\n", error);
return error;
}
@@ -401,14 +401,14 @@ static int zinitix_start(struct bt541_ts_data *bt541)
error = zinitix_send_power_on_sequence(bt541);
if (error) {
- dev_err(&bt541->client->dev,
+ dev_err(bt541->dev,
"Error while sending power-on sequence: %d\n", error);
return error;
}
error = zinitix_init_touch(bt541);
if (error) {
- dev_err(&bt541->client->dev,
+ dev_err(bt541->dev,
"Error while configuring touch IC\n");
return error;
}
@@ -427,7 +427,7 @@ static int zinitix_stop(struct bt541_ts_data *bt541)
error = regulator_bulk_disable(ARRAY_SIZE(bt541->supplies),
bt541->supplies);
if (error) {
- dev_err(&bt541->client->dev,
+ dev_err(bt541->dev,
"Failed to disable regulators: %d\n", error);
return error;
}
@@ -454,9 +454,9 @@ static int zinitix_init_input_dev(struct bt541_ts_data *bt541)
struct input_dev *input_dev;
int error;
- input_dev = devm_input_allocate_device(&bt541->client->dev);
+ input_dev = devm_input_allocate_device(bt541->dev);
if (!input_dev) {
- dev_err(&bt541->client->dev,
+ dev_err(bt541->dev,
"Failed to allocate input device.");
return -ENOMEM;
}
@@ -477,7 +477,7 @@ static int zinitix_init_input_dev(struct bt541_ts_data *bt541)
touchscreen_parse_properties(input_dev, true, &bt541->prop);
if (!bt541->prop.max_x || !bt541->prop.max_y) {
- dev_err(&bt541->client->dev,
+ dev_err(bt541->dev,
"Touchscreen-size-x and/or touchscreen-size-y not set in dts\n");
return -EINVAL;
}
@@ -485,14 +485,14 @@ static int zinitix_init_input_dev(struct bt541_ts_data *bt541)
error = input_mt_init_slots(input_dev, MAX_SUPPORTED_FINGER_NUM,
INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
if (error) {
- dev_err(&bt541->client->dev,
+ dev_err(bt541->dev,
"Failed to initialize MT slots: %d", error);
return error;
}
error = input_register_device(input_dev);
if (error) {
- dev_err(&bt541->client->dev,
+ dev_err(bt541->dev,
"Failed to register input device: %d", error);
return error;
}
@@ -517,6 +517,7 @@ static int zinitix_ts_probe(struct i2c_client *client)
return -ENOMEM;
bt541->client = client;
+ bt541->dev = dev;
i2c_set_clientdata(client, bt541);
error = zinitix_init_regulators(bt541);
--
2.35.1
