Add a driver for interfacing with the Awinic AW8695 LRA Haptic Driver.
The chip supports multiple modes of which only RAM mode is implemented.
RTP mode would enable a user to "stream" waveform data but to my
knowledge no such user space API exists in the kernel yet.
We upload a basic sine wave to the chip and play this on request.
Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
drivers/input/misc/Kconfig | 11 +
drivers/input/misc/Makefile | 1 +
drivers/input/misc/aw8695-haptics.c | 1391 +++++++++++++++++++++++++++
3 files changed, 1403 insertions(+)
create mode 100644 drivers/input/misc/aw8695-haptics.c
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index dd5227cf8696..40f4ece9075a 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -119,6 +119,17 @@ config INPUT_ATMEL_CAPTOUCH
To compile this driver as a module, choose M here: the
module will be called atmel_captouch.
+config INPUT_AW8695_HAPTICS
+ tristate "Awinic AW8695 haptics support"
+ depends on INPUT && I2C
+ select INPUT_FF_MEMLESS
+ select REGMAP_I2C
+ help
+ Say Y to enable support for the Awinic AW8695 haptics driver.
+
+ To compile this driver as a module, choose M here: the module will
+ be called aw8695-haptics.
+
config INPUT_BMA150
tristate "BMA150/SMB380 acceleration sensor support"
depends on I2C
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index b92c53a6b5ae..18eb84a7bb17 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_INPUT_ATC260X_ONKEY) += atc260x-onkey.o
obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o
obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o
obj-$(CONFIG_INPUT_ATMEL_CAPTOUCH) += atmel_captouch.o
+obj-$(CONFIG_INPUT_AW8695_HAPTICS) += aw8695-haptics.o
obj-$(CONFIG_INPUT_BMA150) += bma150.o
obj-$(CONFIG_INPUT_CM109) += cm109.o
obj-$(CONFIG_INPUT_CMA3000) += cma3000_d0x.o
diff --git a/drivers/input/misc/aw8695-haptics.c b/drivers/input/misc/aw8695-haptics.c
new file mode 100644
index 000000000000..a122c8f0fab8
--- /dev/null
+++ b/drivers/input/misc/aw8695-haptics.c
@@ -0,0 +1,1391 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
+ *
+ * Partially based on vendor driver:
+ * Copyright (c) 2018 AWINIC Technology CO., LTD
+ */
+
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#define AW8695_CHIPID 0x95
+#define AW8695_RESET 0xaa
+/* Default of BASE_ADDR* registers */
+#define AW8695_RAM_BASE_ADDR 0x800
+
+#define AW8695_HIGH_MASK GENMASK(15, 8)
+#define AW8695_LOW_MASK GENMASK(7, 0)
+
+/* Chip ID */
+#define AW8695_ID 0x00
+
+/* System Status */
+#define AW8695_SYSST 0x01
+#define AW8695_SYSST_BSTERRS BIT(7)
+#define AW8695_SYSST_OVS BIT(6)
+#define AW8695_SYSST_UVLS BIT(5)
+#define AW8695_SYSST_FF_AES BIT(4)
+#define AW8695_SYSST_FF_AFS BIT(3)
+#define AW8695_SYSST_OCDS BIT(2)
+#define AW8695_SYSST_OTS BIT(1)
+#define AW8695_SYSST_DONES BIT(0)
+
+/* System Interrupt */
+#define AW8695_SYSINT 0x02
+#define AW8695_SYSINT_BSTERRI BIT(7)
+#define AW8695_SYSINT_OVI BIT(6)
+#define AW8695_SYSINT_UVLI BIT(5)
+#define AW8695_SYSINT_FF_AEI BIT(4)
+#define AW8695_SYSINT_FF_AFI BIT(3)
+#define AW8695_SYSINT_OCDI BIT(2)
+#define AW8695_SYSINT_OTI BIT(1)
+#define AW8695_SYSINT_DONEI BIT(0)
+
+/* System Interrupt Mask */
+#define AW8695_SYSINTM 0x03
+#define AW8695_SYSINTM_BSTERR_OFF BIT(7)
+#define AW8695_SYSINTM_OV_OFF BIT(6)
+#define AW8695_SYSINTM_UVLO_OFF BIT(5)
+#define AW8695_SYSINTM_FF_AE_OFF BIT(4)
+#define AW8695_SYSINTM_FF_AF_OFF BIT(3)
+#define AW8695_SYSINTM_OCD_OFF BIT(2)
+#define AW8695_SYSINTM_OT_OFF BIT(1)
+#define AW8695_SYSINTM_DONE_OFF BIT(0)
+
+/* System Control */
+#define AW8695_SYSCTRL 0x04
+#define AW8695_SYSCTRL_WAVDAT_MODE_MASK GENMASK(7, 6)
+#define AW8695_SYSCTRL_WAVDAT_MODE_4X (3<<6)
+#define AW8695_SYSCTRL_WAVDAT_MODE_2X (0<<6)
+#define AW8695_SYSCTRL_WAVDAT_MODE_1X (1<<6)
+
+#define AW8695_SYSCTRL_RAMINIT_EN BIT(5)
+
+#define AW8695_SYSCTRL_PLAY_MODE_MASK GENMASK(3, 2)
+#define AW8695_SYSCTRL_PLAY_MODE_CONT (2<<2)
+#define AW8695_SYSCTRL_PLAY_MODE_RTP (1<<2)
+#define AW8695_SYSCTRL_PLAY_MODE_RAM (0<<2)
+
+#define AW8695_SYSCTRL_BST_MODE_MASK GENMASK(1, 1)
+#define AW8695_SYSCTRL_BST_MODE_BOOST (1<<1)
+#define AW8695_SYSCTRL_BST_MODE_BYPASS (0<<1)
+
+#define AW8695_SYSCTRL_WORK_MODE_MASK GENMASK(0, 0)
+#define AW8695_SYSCTRL_STANDBY (1<<0)
+#define AW8695_SYSCTRL_ACTIVE (0<<0)
+
+/* Process Control */
+#define AW8695_GO 0x05
+#define AW8695_GO_ENABLE BIT(0)
+
+/* RTP Mode Data */
+#define AW8695_RTP_DATA 0x06
+
+/* Waveform #1 */
+#define AW8695_WAVSEQ1 0x07
+#define AW8695_WAVSEQ1_WAIT BIT(7)
+#define AW8695_WAVSEQ1_WAV_FRM_SEQ1_MASK GENMASK(6, 0)
+
+/* Waveform #2 */
+#define AW8695_WAVSEQ2 0x08
+#define AW8695_WAVSEQ2_WAIT BIT(7)
+#define AW8695_WAVSEQ2_WAV_FRM_SEQ2_MASK GENMASK(6, 0)
+
+/* Waveform #3 */
+#define AW8695_WAVSEQ3 0x09
+#define AW8695_WAVSEQ3_WAIT BIT(7)
+#define AW8695_WAVSEQ3_WAV_FRM_SEQ3_MASK GENMASK(6, 0)
+
+/* Waveform #4 */
+#define AW8695_WAVSEQ4 0x0a
+#define AW8695_WAVSEQ4_WAIT BIT(7)
+#define AW8695_WAVSEQ4_WAV_FRM_SEQ4_MASK GENMASK(6, 0)
+
+/* Waveform #5 */
+#define AW8695_WAVSEQ5 0x0b
+#define AW8695_WAVSEQ5_WAIT BIT(7)
+#define AW8695_WAVSEQ5_WAV_FRM_SEQ5_MASK GENMASK(6, 0)
+
+/* Waveform #6 */
+#define AW8695_WAVSEQ6 0x0c
+#define AW8695_WAVSEQ6_WAIT BIT(7)
+#define AW8695_WAVSEQ6_WAV_FRM_SEQ6_MASK GENMASK(6, 0)
+
+/* Waveform #7 */
+#define AW8695_WAVSEQ7 0x0d
+#define AW8695_WAVSEQ7_WAIT BIT(7)
+#define AW8695_WAVSEQ7_WAV_FRM_SEQ7_MASK GENMASK(6, 0)
+
+/* Waveform #8 */
+#define AW8695_WAVSEQ8 0x0e
+#define AW8695_WAVSEQ8_WAIT BIT(7)
+#define AW8695_WAVSEQ8_WAV_FRM_SEQ8_MASK GENMASK(6, 0)
+
+/* Waveform Loop #1 */
+#define AW8695_WAVLOOP1 0x0f
+#define AW8695_WAVLOOP1_SEQ1_MASK GENMASK(7, 4)
+#define AW8695_WAVLOOP1_SEQ2_MASK GENMASK(3, 0)
+
+/* Waveform Loop #2 */
+#define AW8695_WAVLOOP2 0x10
+#define AW8695_WAVLOOP2_SEQ3_MASK GENMASK(7, 4)
+#define AW8695_WAVLOOP2_SEQ4_MASK GENMASK(3, 0)
+
+/* Waveform Loop #3 */
+#define AW8695_WAVLOOP3 0x11
+#define AW8695_WAVLOOP3_SEQ5_MASK GENMASK(7, 4)
+#define AW8695_WAVLOOP3_SEQ6_MASK GENMASK(3, 0)
+
+/* Waveform Loop #4 */
+#define AW8695_WAVLOOP4 0x12
+#define AW8695_WAVLOOP4_SEQ7_MASK GENMASK(7, 4)
+#define AW8695_WAVLOOP4_SEQ8_MASK GENMASK(3, 0)
+
+/* Main Loop */
+#define AW8695_MAIN_LOOP 0x13
+
+/* TRIG1 Edge Waveform #1 */
+#define AW8695_TRG1_WAV_P 0x14
+
+/* TRIG2 Edge Waveform #1 */
+#define AW8695_TRG2_WAV_P 0x15
+
+/* TRIG3 Edge Waveform #1 */
+#define AW8695_TRG3_WAV_P 0x16
+
+/* TRIG1 Edge Waveform #2 */
+#define AW8695_TRG1_WAV_N 0x17
+
+/* TRIG2 Edge Waveform #2 */
+#define AW8695_TRG2_WAV_N 0x18
+
+/* TRIG3 Edge Waveform #2 */
+#define AW8695_TRG3_WAV_N 0x19
+
+#define AW8695_TRG_PRIO 0x1a
+#define AW8695_PLAYPRIO_GO_MASK GENMASK(7, 6)
+#define AW8695_PLAYPRIO_TRIG3_MASK GENMASK(5, 4)
+#define AW8695_PLAYPRIO_TRIG2_MASK GENMASK(3, 2)
+#define AW8695_PLAYPRIO_TRIG1_MASK GENMASK(1, 0)
+
+/* Trig Pins Config */
+#define AW8695_TRG_CFG1 0x1b
+#define AW8695_TRGCFG1_TRG3_POLAR_NEG BIT(5)
+#define AW8695_TRGCFG1_TRG3_EDGE_POS BIT(4)
+#define AW8695_TRGCFG1_TRG2_POLAR_NEG BIT(3)
+#define AW8695_TRGCFG1_TRG2_EDGE_POS BIT(2)
+#define AW8695_TRGCFG1_TRG1_POLAR_NEG BIT(1)
+#define AW8695_TRGCFG1_TRG1_EDGE_POS BIT(0)
+
+/* Trig Pins Config */
+#define AW8695_TRG_CFG2 0x1c
+#define AW8695_TRGCFG2_TRG3_ENABLE BIT(2)
+#define AW8695_TRGCFG2_TRG2_ENABLE BIT(1)
+#define AW8695_TRGCFG2_TRG1_ENABLE BIT(0)
+
+/* Debug Control */
+#define AW8695_DBGCTRL 0x20
+#define AW8695_DBGCTRL_INT_EDGE_MODE_MASK GENMASK(3, 3)
+#define AW8695_DBGCTRL_INT_EDGE_MODE_POS (1<<3)
+#define AW8695_DBGCTRL_INT_EDGE_MODE_BOTH (0<<3)
+#define AW8695_DBGCTRL_INT_MODE_MASK GENMASK(2, 2)
+#define AW8695_DBGCTRL_INT_MODE_EDGE (1<<2)
+#define AW8695_DBGCTRL_INT_MODE_LEVEL (0<<2)
+
+/* High Five Bits of Wave SRAM */
+#define AW8695_BASE_ADDRH 0x21
+
+/* Low Eight Bits of Wave SRAM */
+#define AW8695_BASE_ADDRL 0x22
+
+/* High Four Bits of FIFO AE */
+#define AW8695_FIFO_AEH 0x23
+
+/* Low Eight Bits of FIFO AE */
+#define AW8695_FIFO_AEL 0x24
+
+/* High Four Bits of FIFO AF */
+#define AW8695_FIFO_AFH 0x25
+
+/* Low Eight Bits of FIFO AF */
+#define AW8695_FIFO_AFL 0x26
+
+#define AW8695_WAKE_DLY 0x27
+
+#define AW8695_START_DLY 0x28
+
+#define AW8695_END_DLY_H 0x29
+
+#define AW8695_END_DLY_L 0x2a
+
+/* Global Control Data */
+#define AW8695_DATCTRL 0x2b
+#define AW8695_DATCTRL_FC_MASK GENMASK(6, 6)
+#define AW8695_DATCTRL_FC_1000HZ (3<<6)
+#define AW8695_DATCTRL_FC_800HZ (3<<6)
+#define AW8695_DATCTRL_FC_600HZ (1<<6)
+#define AW8695_DATCTRL_FC_400HZ (0<<6)
+
+#define AW8695_DATCTRL_LPF_ENABLE_MASK GENMASK(5, 5)
+#define AW8695_DATCTRL_LPF_ENABLE (1<<5)
+#define AW8695_DATCTRL_LPF_DISABLE (0<<5)
+
+#define AW8695_DATCTRL_WAKEMODE_ENABLE_MASK GENMASK(0, 0)
+#define AW8695_DATCTRL_WAKEMODE_ENABLE (1<<0)
+#define AW8695_DATCTRL_WAKEMODE_DISABLE (0<<0)
+
+#define AW8695_PWMDEL 0x2c
+
+/* PWM Output Protect Configuration */
+#define AW8695_PWMPRC 0x2d
+#define AW8695_PWMPRC_PRC_ENABLE BIT(7)
+
+/* PWM Debug */
+#define AW8695_PWMDBG 0x2e
+#define AW8695_PWMDBG_PWM_MODE_MASK GENMASK(6, 5)
+#define AW8695_PWMDBG_PWM_12K (3<<5)
+#define AW8695_PWMDBG_PWM_24K (2<<5)
+#define AW8695_PWMDBG_PWM_48K (0<<5)
+
+#define AW8695_LDOCTRL 0x2f
+
+/* Debug Status */
+#define AW8695_DBGSTAT 0x30
+#define AW8695_DBGSTAT_FF_EMPTY BIT(0)
+
+/* Boost Debug #1 */
+#define AW8695_BSTDBG1 0x31
+
+/* Boost Debug #2 */
+#define AW8695_BSTDBG2 0x32
+
+/* Boost Debug #3 */
+#define AW8695_BSTDBG3 0x33
+
+/* Boost Config */
+#define AW8695_BSTCFG 0x34
+#define AW8695_BSTCFG_PEAKCUR_MASK GENMASK(2, 0)
+#define AW8695_BSTCFG_PEAKCUR_4A (7<<0)
+#define AW8695_BSTCFG_PEAKCUR_3P75A (6<<0)
+#define AW8695_BSTCFG_PEAKCUR_3P5A (5<<0)
+#define AW8695_BSTCFG_PEAKCUR_3P25A (4<<0)
+#define AW8695_BSTCFG_PEAKCUR_3A (3<<0)
+#define AW8695_BSTCFG_PEAKCUR_2P5A (2<<0)
+#define AW8695_BSTCFG_PEAKCUR_2A (1<<0)
+#define AW8695_BSTCFG_PEAKCUR_1P5A (0<<0)
+
+#define AW8695_ANADBG 0x35
+#define AW8695_ANADBG_IOC_MASK GENMASK(3, 2)
+#define AW8695_ANADBG_IOC_4P65A (3<<2)
+#define AW8695_ANADBG_IOC_4P15A (2<<2)
+#define AW8695_ANADBG_IOC_3P65A (1<<2)
+#define AW8695_ANADBG_IOC_3P15A (0<<2)
+
+#define AW8695_ANACTRL 0x36
+#define AW8695_ANACTRL_LRA_SRC_MASK GENMASK(5, 5)
+#define AW8695_ANACTRL_LRA_SRC_REG (1<<5)
+#define AW8695_ANACTRL_LRA_SRC_EFUSE (0<<5)
+#define AW8695_ANACTRL_HD_PD_MASK GENMASK(3, 3)
+#define AW8695_ANACTRL_HD_PD_EN (1<<3)
+#define AW8695_ANACTRL_HD_HZ_EN (0<<3)
+
+#define AW8695_CPDBG 0x37
+
+#define AW8695_GLBDBG 0x38
+
+/* Data Gain */
+#define AW8695_DATDBG 0x39
+
+/* Boost Debug #4 */
+#define AW8695_BSTDBG4 0x3a
+#define AW8695_BSTDBG4_BSTVOL_MASK GENMASK(5, 1)
+
+/* Boost Debug #5 */
+#define AW8695_BSTDBG5 0x3b
+
+/* Boost Debug #6 */
+#define AW8695_BSTDBG6 0x3c
+
+#define AW8695_HDRVDBG 0x3d
+
+/* Waveform Protect Level */
+#define AW8695_PRLVL 0x3e
+#define AW8695_PRLVL_PR_ENABLE BIT(7)
+#define AW8695_PRLVL_PRLVL_MASK GENMASK(6, 0)
+
+/* Waveform Protect Period */
+#define AW8695_PRTIME 0x3f
+
+/* SRAM Address 0xhigh */
+#define AW8695_RAMADDRH 0x40
+
+/* SRAM Address 0xlow */
+#define AW8695_RAMADDRL 0x41
+
+/* SRAM Data */
+#define AW8695_RAMDATA 0x42
+
+#define AW8695_GLB_STATE 0x46
+
+#define AW8695_BST_AUTO 0x47
+#define AW8695_BST_AUTO_BST_AUTOSW_MASK GENMASK(2, 2)
+#define AW8695_BST_AUTO_BST_AUTOMATIC_BOOST (1<<2)
+#define AW8695_BST_AUTO_BST_MANUAL_BOOST (0<<2)
+#define AW8695_BST_AUTO_BST_RTP_ENABLE BIT(1)
+#define AW8695_BST_AUTO_BST_RAM_ENABLE BIT(0)
+
+/* CONT Mode Control */
+#define AW8695_CONT_CTRL 0x48
+#define AW8695_CONT_CTRL_ZC_DETEC_ENABLE BIT(7)
+#define AW8695_CONT_CTRL_WAIT_PERIOD_MASK GENMASK(6, 5)
+#define AW8695_CONT_CTRL_WAIT_8PERIOD (3<<5)
+#define AW8695_CONT_CTRL_WAIT_4PERIOD (2<<5)
+#define AW8695_CONT_CTRL_WAIT_2PERIOD (1<<5)
+#define AW8695_CONT_CTRL_WAIT_1PERIOD (0<<5)
+#define AW8695_CONT_CTRL_MODE_MASK GENMASK(4, 4)
+#define AW8695_CONT_CTRL_BY_DRV_TIME (1<<4)
+#define AW8695_CONT_CTRL_BY_GO_SIGNAL (0<<4)
+#define AW8695_CONT_CTRL_EN_CLOSE_MASK GENMASK(3, 3)
+#define AW8695_CONT_CTRL_CLOSE_PLAYBACK (1<<3)
+#define AW8695_CONT_CTRL_OPEN_PLAYBACK (0<<3)
+#define AW8695_CONT_CTRL_F0_DETECT_ENABLE BIT(2)
+#define AW8695_CONT_CTRL_O2C_ENABLE BIT(1)
+#define AW8695_CONT_CTRL_AUTO_BRK_ENABLE BIT(0)
+
+/* High 8 Bits Pre Setting f0 Value */
+#define AW8695_F_PRE_H 0x49
+
+/* Low 8 Bits Pre Setting f0 Value */
+#define AW8695_F_PRE_L 0x4a
+
+/* High 4 Bits of Delay Time Setting */
+#define AW8695_TD_H 0x4b
+
+/* Low 8 Bits of Delay Time Setting */
+#define AW8695_TD_L 0x4c
+
+#define AW8695_TSET 0x4d
+
+#define AW8695_TRIM_LRA 0x5b
+
+#define AW8695_R_SPARE 0x5d
+
+#define AW8695_D2SCFG 0x5e
+#define AW8695_D2SCFG_CLK_ADC_MASK GENMASK(7, 5)
+#define AW8695_D2SCFG_CLK_ASC_0P09375MHZ (7<<5)
+#define AW8695_D2SCFG_CLK_ASC_0P1875MHZ (6<<5)
+#define AW8695_D2SCFG_CLK_ASC_0P375MHZ (5<<5)
+#define AW8695_D2SCFG_CLK_ASC_0P75MHZ (4<<5)
+#define AW8695_D2SCFG_CLK_ASC_1P5MHZ (3<<5)
+#define AW8695_D2SCFG_CLK_ASC_3MHZ (2<<5)
+#define AW8695_D2SCFG_CLK_ASC_6MHZ (1<<5)
+#define AW8695_D2SCFG_CLK_ASC_12MHZ (0<<5)
+
+/* Detection Control */
+#define AW8695_DETCTRL 0x5f
+#define AW8695_DETCTRL_RL_OS_MASK GENMASK(6, 6)
+#define AW8695_DETCTRL_RL_DETECT (1<<6)
+#define AW8695_DETCTRL_OS_DETECT (0<<6)
+#define AW8695_DETCTRL_PROTECT_MASK GENMASK(5, 5)
+#define AW8695_DETCTRL_PROTECT_NO_ACTION (1<<5)
+#define AW8695_DETCTRL_PROTECT_SHUTDOWN (0<<5)
+#define AW8695_DETCTRL_ADO_SLOT_MODE_ENABLE BIT(4)
+#define AW8695_DETCTRL_VBAT_GO_ENABLE BIT(1)
+#define AW8695_DETCTRL_DIAG_GO_ENABLE BIT(0)
+
+/* Detected RL of LRA */
+#define AW8695_RLDET 0x60
+
+/* Detected Offset of LRA */
+#define AW8695_OSDET 0x61
+
+/* Detected VBAT */
+#define AW8695_VBATDET 0x62
+
+#define AW8695_TESTDET 0x63
+
+#define AW8695_DETLO 0x64
+
+#define AW8695_BEMFDBG 0x65
+
+/* ADC Test */
+#define AW8695_ADCTEST 0x66
+#define AW8695_ADCTEST_VBAT_MODE_MASK GENMASK(6, 6)
+#define AW8695_ADCTEST_VBAT_HW_COMP (1<<6)
+#define AW8695_ADCTEST_VBAT_SW_COMP (0<<6)
+
+#define AW8695_BEMFTEST 0x67
+
+/* High 8 Bits Detected f0 Value */
+#define AW8695_F_LRA_F0_H 0x68
+
+/* Low 8 Bits Detected f0 Value */
+#define AW8695_F_LRA_F0_L 0x69
+
+/* High 8 Bits CONT_ENG Gotten f0 Value */
+#define AW8695_F_LRA_CONT_H 0x6a
+
+/* Low 8 Bits CONT_ENG Gotten f0 Value */
+#define AW8695_F_LRA_CONT_L 0x6b
+
+#define AW8695_WAIT_VOL_MP 0x6d
+
+#define AW8695_WAIT_VOL_MN 0x6f
+
+#define AW8695_BEMF_VOL_H 0x70
+
+#define AW8695_BEMF_VOL_L 0x71
+
+/* Zero Cross Threshold High 8 Bits Configuration */
+#define AW8695_ZC_THRSH_H 0x72
+
+/* Zero Cross Threshold Low 8 Bits Configuration */
+#define AW8695_ZC_THRSH_L 0x73
+
+#define AW8695_BEMF_VTHH_H 0x74
+
+#define AW8695_BEMF_VTHH_L 0x75
+
+#define AW8695_BEMF_VTHL_H 0x76
+
+#define AW8695_BEMF_VTHL_L 0x77
+
+/* BEMF Detection Cycles Configuration */
+#define AW8695_BEMF_NUM 0x78
+#define AW8695_BEMF_NUM_BRK_MASK GENMASK(3, 0)
+
+/* Drive Time Setting */
+#define AW8695_DRV_TIME 0x79
+
+/* Non Zero Cross Time Setting */
+#define AW8695_TIME_NZC 0x7a
+
+/* Drive Level Setting */
+#define AW8695_DRV_LVL 0x7b
+
+/* Drive Level for Overdrive Setting */
+#define AW8695_DRV_LVL_OV 0x7c
+
+/* Number Configuration for F0 Trace #1 */
+#define AW8695_NUM_F0_1 0x7d
+#define AW8695_NUM_F0_1_PRE_MASK GENMASK(7, 4)
+#define AW8695_NUM_F0_1_WAIT_MASK GENMASK(3, 0)
+
+/* Number Configuration for F0 Trace #2 */
+#define AW8695_NUM_F0_2 0x7e
+
+/* Number Configuration for F0 Trace #3 */
+#define AW8695_NUM_F0_3 0x7f
+
+#define AW8695_MAX_REG 0x7f
+
+enum aw8695_work_mode {
+ AW8695_STANDBY_MODE,
+ AW8695_RAM_MODE,
+ AW8695_RTP_MODE,
+ AW8695_TRIG_MODE,
+ AW8695_CONT_MODE,
+};
+
+struct aw8695_data {
+ struct input_dev *input_dev;
+ struct i2c_client *client;
+ struct regmap *regmap;
+ struct gpio_desc *reset_gpio;
+ bool running;
+ struct work_struct play_work;
+ /* Parameters from devicetree */
+ u32 f0_preset;
+ u32 f0_coefficient;
+ u32 f0_cali_percent;
+ u32 drive_level;
+ u32 f0_det_play;
+ u32 f0_det_wait;
+ u32 f0_det_repeat;
+ u32 f0_det_trace;
+ u8 boost_debug[3];
+ u8 tset;
+ u8 r_spare;
+ u32 bemf_vthh;
+ u32 bemf_vthl;
+};
+
+/*
+ * Sine wave representing the magnitude of the drive to be used.
+ * Data is encoded in two's complement.
+ * round(84 * sin(x / 16.25))
+ */
+static const u8 aw8695_sine_waveform[] = {
+ 0x00, 0x05, 0x0a, 0x0f, 0x14, 0x19, 0x1e, 0x23, 0x28, 0x2c, 0x30, 0x35,
+ 0x39, 0x3c, 0x40, 0x43, 0x46, 0x49, 0x4b, 0x4d, 0x4f, 0x51, 0x52, 0x53,
+ 0x54, 0x54, 0x54, 0x54, 0x53, 0x52, 0x51, 0x4f, 0x4d, 0x4b, 0x49, 0x46,
+ 0x43, 0x40, 0x3c, 0x39, 0x35, 0x31, 0x2c, 0x28, 0x23, 0x1f, 0x1a, 0x15,
+ 0x10, 0x0b, 0x05, 0x00, 0xfb, 0xf6, 0xf1, 0xec, 0xe7, 0xe2, 0xdd, 0xd9,
+ 0xd4, 0xd0, 0xcc, 0xc8, 0xc4, 0xc0, 0xbd, 0xba, 0xb7, 0xb5, 0xb3, 0xb1,
+ 0xaf, 0xae, 0xad, 0xac, 0xac, 0xac, 0xac, 0xad, 0xae, 0xaf, 0xb1, 0xb2,
+ 0xb5, 0xb7, 0xba, 0xbd, 0xc0, 0xc3, 0xc7, 0xcb, 0xcf, 0xd3, 0xd8, 0xdc,
+ 0xe1, 0xe6, 0xeb, 0xf0, 0xf5, 0xfa
+};
+
+/*
+ * Header that gets written to AW8695 SRAM that describes the available
+ * waveforms being transferred afterwards.
+ *
+ * @version: waveform library version
+ * @start_address: start address of waveform in SRAM
+ * @end_address: end address of waveform in SRAM
+ */
+struct aw8695_sram_waveform_header {
+ u8 version;
+ struct {
+ __be16 start_address;
+ __be16 end_address;
+ } __packed waveform_address[1];
+} __packed;
+
+static const struct aw8695_sram_waveform_header sram_waveform_header = {
+ .version = 0x01,
+ .waveform_address = {
+ /* Simple sine wave defined above */
+ {
+ .start_address = cpu_to_be16(AW8695_RAM_BASE_ADDR +
+ sizeof(struct aw8695_sram_waveform_header)),
+ .end_address = cpu_to_be16(AW8695_RAM_BASE_ADDR +
+ sizeof(struct aw8695_sram_waveform_header) +
+ ARRAY_SIZE(aw8695_sine_waveform) - 1),
+ }
+ }
+};
+
+static int aw8695_interrupt_clear(struct aw8695_data *haptics)
+{
+ unsigned int read_buf;
+
+ /* Clear UVLI bit by reading register */
+ return regmap_read(haptics->regmap, AW8695_SYSINT, &read_buf);
+}
+
+static int aw8695_haptic_set_active(struct aw8695_data *haptics)
+{
+ int err;
+
+ err = regmap_update_bits(haptics->regmap, AW8695_SYSCTRL,
+ AW8695_SYSCTRL_WORK_MODE_MASK, AW8695_SYSCTRL_ACTIVE);
+ if (err)
+ return err;
+
+ err = aw8695_interrupt_clear(haptics);
+ if (err)
+ return err;
+
+ return regmap_update_bits(haptics->regmap, AW8695_SYSINTM,
+ AW8695_SYSINTM_UVLO_OFF, 0);
+}
+
+static int aw8695_set_work_mode(struct aw8695_data *haptics,
+ enum aw8695_work_mode mode)
+{
+ struct device *dev = &haptics->client->dev;
+ int err;
+
+ switch (mode) {
+ case AW8695_STANDBY_MODE:
+ err = regmap_update_bits(haptics->regmap, AW8695_SYSINTM,
+ AW8695_SYSINTM_UVLO_OFF, AW8695_SYSINTM_UVLO_OFF);
+ if (err)
+ return err;
+ err = regmap_update_bits(haptics->regmap, AW8695_SYSCTRL,
+ AW8695_SYSCTRL_WORK_MODE_MASK, AW8695_SYSCTRL_STANDBY);
+ if (err)
+ return err;
+ break;
+ case AW8695_RAM_MODE:
+ err = regmap_update_bits(haptics->regmap, AW8695_SYSCTRL,
+ AW8695_SYSCTRL_PLAY_MODE_MASK, AW8695_SYSCTRL_PLAY_MODE_RAM);
+ if (err)
+ return err;
+ err = regmap_update_bits(haptics->regmap, AW8695_SYSCTRL,
+ AW8695_SYSCTRL_BST_MODE_MASK, AW8695_SYSCTRL_BST_MODE_BYPASS);
+ if (err)
+ return err;
+ err = aw8695_haptic_set_active(haptics);
+ if (err)
+ return err;
+ break;
+ case AW8695_CONT_MODE:
+ err = regmap_update_bits(haptics->regmap, AW8695_SYSCTRL,
+ AW8695_SYSCTRL_PLAY_MODE_MASK, AW8695_SYSCTRL_PLAY_MODE_CONT);
+ if (err)
+ return err;
+ err = regmap_update_bits(haptics->regmap, AW8695_SYSCTRL,
+ AW8695_SYSCTRL_BST_MODE_MASK, AW8695_SYSCTRL_BST_MODE_BYPASS);
+ if (err)
+ return err;
+ err = aw8695_haptic_set_active(haptics);
+ if (err)
+ return err;
+ break;
+ default:
+ dev_err(dev, "Unhandled mode: %d\n", mode);
+ return -EINVAL;
+ }
+
+ return err;
+}
+
+static int aw8695_haptics_play(struct input_dev *dev, void *data,
+ struct ff_effect *effect)
+{
+ struct aw8695_data *haptics = input_get_drvdata(dev);
+ int level;
+
+ level = effect->u.rumble.strong_magnitude;
+ if (!level)
+ level = effect->u.rumble.weak_magnitude;
+
+ haptics->running = level;
+ schedule_work(&haptics->play_work);
+
+ return 0;
+}
+
+static int aw8695_haptics_stop(struct aw8695_data *haptics)
+{
+ int err;
+ unsigned int read_buf;
+ struct device *dev = &haptics->client->dev;
+
+ err = regmap_update_bits(haptics->regmap, AW8695_GO,
+ AW8695_GO_ENABLE, 0);
+ if (err)
+ return err;
+
+ err = regmap_read_poll_timeout(haptics->regmap, AW8695_GLB_STATE, read_buf,
+ (read_buf & 0x0f) == 0, 2000, 2000 * 100);
+ if (err) {
+ dev_err(dev, "Did not enter standby: %d\n", err);
+ return err;
+ }
+
+ return aw8695_set_work_mode(haptics, AW8695_STANDBY_MODE);
+}
+
+static int aw8695_haptics_start(struct aw8695_data *haptics)
+{
+ int err;
+
+ err = aw8695_haptics_stop(haptics);
+ if (err)
+ return err;
+
+ /* Configure for waveform #1 to be played infinitely */
+ err = regmap_write(haptics->regmap, AW8695_WAVSEQ1, 0x1);
+ if (err)
+ return err;
+
+ err = regmap_update_bits(haptics->regmap, AW8695_WAVLOOP1,
+ AW8695_WAVLOOP1_SEQ1_MASK, 0xf0);
+ if (err)
+ return err;
+
+ err = regmap_write(haptics->regmap, AW8695_WAVSEQ2, 0x0);
+ if (err)
+ return err;
+
+ err = regmap_update_bits(haptics->regmap, AW8695_WAVLOOP1,
+ AW8695_WAVLOOP1_SEQ2_MASK, 0x0);
+ if (err)
+ return err;
+
+ /* Configure for RAM mode */
+ err = aw8695_set_work_mode(haptics, AW8695_RAM_MODE);
+ if (err)
+ return err;
+
+ /* Start vibration */
+ return regmap_update_bits(haptics->regmap, AW8695_GO,
+ AW8695_GO_ENABLE, AW8695_GO_ENABLE);
+}
+
+static void aw8695_close(struct input_dev *input)
+{
+ struct aw8695_data *haptics = input_get_drvdata(input);
+ struct device *dev = &haptics->client->dev;
+ int err;
+
+ cancel_work_sync(&haptics->play_work);
+ err = aw8695_haptics_stop(haptics);
+ if (err)
+ dev_err(dev, "Failed to stop haptics: %d\n", err);
+}
+
+static void aw8695_haptics_play_work(struct work_struct *work)
+{
+ struct aw8695_data *haptics =
+ container_of(work, struct aw8695_data, play_work);
+ struct device *dev = &haptics->client->dev;
+ int err;
+
+ if (haptics->running)
+ err = aw8695_haptics_start(haptics);
+ else
+ err = aw8695_haptics_stop(haptics);
+
+ if (err)
+ dev_err(dev, "Failed to execute work command: %d\n", err);
+}
+
+static void aw8695_hw_reset(struct aw8695_data *haptics)
+{
+ /* Pull reset low */
+ gpiod_set_value_cansleep(haptics->reset_gpio, 0);
+
+ /* Wait ~1ms */
+ usleep_range(1000, 2000);
+
+ /* Pull reset high */
+ gpiod_set_value_cansleep(haptics->reset_gpio, 1);
+
+ /* Wait ~3.5ms until I2C is accessible */
+ usleep_range(3500, 4000);
+}
+
+static int aw8695_haptic_offset_calibration(struct aw8695_data *haptics)
+{
+ unsigned int read_buf;
+ int err;
+
+ err = regmap_update_bits(haptics->regmap, AW8695_SYSCTRL,
+ AW8695_SYSCTRL_RAMINIT_EN, AW8695_SYSCTRL_RAMINIT_EN);
+ if (err)
+ return err;
+ err = regmap_update_bits(haptics->regmap, AW8695_DETCTRL,
+ AW8695_DETCTRL_DIAG_GO_ENABLE, AW8695_DETCTRL_DIAG_GO_ENABLE);
+ if (err)
+ return err;
+
+ err = regmap_read_poll_timeout(haptics->regmap, AW8695_DETCTRL, read_buf,
+ (read_buf & AW8695_DETCTRL_DIAG_GO_ENABLE) == 0, 10000, 10000 * 50);
+ if (err)
+ return err;
+
+ return regmap_update_bits(haptics->regmap, AW8695_SYSCTRL,
+ AW8695_SYSCTRL_RAMINIT_EN, 0);
+}
+
+static int aw8695_haptic_read_f0(struct aw8695_data *haptics)
+{
+ struct device *dev = &haptics->client->dev;
+ unsigned long f0;
+ unsigned int f0_reg;
+ unsigned int read_buf;
+ int err;
+
+ err = regmap_read(haptics->regmap, AW8695_F_LRA_F0_H, &read_buf);
+ if (err)
+ return err;
+ f0_reg = FIELD_PREP(AW8695_HIGH_MASK, read_buf);
+
+ err = regmap_read(haptics->regmap, AW8695_F_LRA_F0_L, &read_buf);
+ if (err)
+ return err;
+ f0_reg |= FIELD_PREP(AW8695_LOW_MASK, read_buf);
+
+ if (!f0_reg) {
+ dev_err(dev, "Failed to read f0 value!\n");
+ return -EINVAL;
+ }
+
+ f0 = 1000000000 / (f0_reg * haptics->f0_coefficient);
+ dev_dbg(dev, "Read new f0: %d\n", (int)f0);
+
+ return (int)f0;
+}
+
+static int aw8695_haptic_get_f0(struct aw8695_data *haptics)
+{
+ struct device *dev = &haptics->client->dev;
+ unsigned int read_buf;
+ unsigned int f0_trace_ms;
+ unsigned int f0_reg;
+ int f0;
+ int err;
+
+ err = aw8695_haptics_stop(haptics);
+ if (err)
+ return err;
+
+ err = regmap_write(haptics->regmap, AW8695_TRIM_LRA, 0x00);
+ if (err)
+ return err;
+
+ err = aw8695_set_work_mode(haptics, AW8695_CONT_MODE);
+ if (err)
+ return err;
+
+ err = regmap_update_bits(haptics->regmap, AW8695_CONT_CTRL,
+ AW8695_CONT_CTRL_EN_CLOSE_MASK, AW8695_CONT_CTRL_OPEN_PLAYBACK);
+ if (err)
+ return err;
+ err = regmap_update_bits(haptics->regmap, AW8695_CONT_CTRL,
+ AW8695_CONT_CTRL_F0_DETECT_ENABLE, AW8695_CONT_CTRL_F0_DETECT_ENABLE);
+ if (err)
+ return err;
+
+ /* LPF */
+ err = regmap_update_bits(haptics->regmap, AW8695_DATCTRL,
+ AW8695_DATCTRL_FC_MASK, AW8695_DATCTRL_FC_1000HZ);
+ if (err)
+ return err;
+ err = regmap_update_bits(haptics->regmap, AW8695_DATCTRL,
+ AW8695_DATCTRL_LPF_ENABLE_MASK, AW8695_DATCTRL_LPF_ENABLE);
+ if (err)
+ return err;
+
+ /* LRA OSC Source */
+ err = regmap_update_bits(haptics->regmap, AW8695_ANACTRL,
+ AW8695_ANACTRL_LRA_SRC_MASK, AW8695_ANACTRL_LRA_SRC_REG);
+ if (err)
+ return err;
+
+ /* preset f0 */
+ f0_reg = 1000000000 / (haptics->f0_preset * haptics->f0_coefficient);
+ err = regmap_write(haptics->regmap, AW8695_F_PRE_H,
+ FIELD_GET(AW8695_HIGH_MASK, f0_reg));
+ if (err)
+ return err;
+ err = regmap_write(haptics->regmap, AW8695_F_PRE_L,
+ FIELD_GET(AW8695_LOW_MASK, f0_reg));
+ if (err)
+ return err;
+
+ /* f0 driver level */
+ err = regmap_write(haptics->regmap, AW8695_DRV_LVL, haptics->drive_level);
+ if (err)
+ return err;
+
+ /* f0 trace parameter */
+ err = regmap_write(haptics->regmap, AW8695_NUM_F0_1,
+ FIELD_PREP(AW8695_NUM_F0_1_PRE_MASK, haptics->f0_det_play) |
+ FIELD_PREP(AW8695_NUM_F0_1_WAIT_MASK, haptics->f0_det_wait));
+ if (err)
+ return err;
+ err = regmap_write(haptics->regmap, AW8695_NUM_F0_2, haptics->f0_det_repeat);
+ if (err)
+ return err;
+ err = regmap_write(haptics->regmap, AW8695_NUM_F0_3, haptics->f0_det_trace);
+ if (err)
+ return err;
+
+ err = aw8695_interrupt_clear(haptics);
+ if (err)
+ return err;
+
+ /* play go and start f0 calibration */
+ err = regmap_update_bits(haptics->regmap, AW8695_GO,
+ AW8695_GO_ENABLE, AW8695_GO_ENABLE);
+ if (err)
+ return err;
+
+ /* f0 trace time */
+ f0_trace_ms =
+ (1000 * 10 / haptics->f0_preset) * (haptics->f0_det_play + haptics->f0_det_wait +
+ (haptics->f0_det_trace + haptics->f0_det_wait) * (haptics->f0_det_repeat - 1));
+ usleep_range(f0_trace_ms * 1000, f0_trace_ms * 1000 + 500);
+
+ err = regmap_read_poll_timeout(haptics->regmap, AW8695_GLB_STATE, read_buf,
+ (read_buf & 0x0f) == 0, 10000, 10000 * 50);
+ if (err) {
+ dev_err(dev, "Did not enter standby: %d\n", err);
+ return err;
+ }
+
+ f0 = aw8695_haptic_read_f0(haptics);
+
+ /* restore default config */
+ err = regmap_update_bits(haptics->regmap, AW8695_CONT_CTRL,
+ AW8695_CONT_CTRL_EN_CLOSE_MASK, AW8695_CONT_CTRL_CLOSE_PLAYBACK);
+ if (err)
+ return err;
+ err = regmap_update_bits(haptics->regmap, AW8695_CONT_CTRL,
+ AW8695_CONT_CTRL_F0_DETECT_ENABLE, 0);
+ if (err)
+ return err;
+
+ return f0;
+}
+
+
+static int aw8695_haptic_f0_calibration(struct aw8695_data *haptics)
+{
+ struct device *dev = &haptics->client->dev;
+ unsigned int read_buf;
+ int f0_cali_step, f0_limit, f0;
+ char f0_cali_lra;
+ int err;
+
+
+ f0 = aw8695_haptic_get_f0(haptics);
+ if (f0 < 0) {
+ dev_err(dev, "Failed to read f0: %d\n", f0);
+ return f0;
+ }
+
+ /* make sure the f0_limit is not more than f0_cali_percent % away from read f0 */
+ if (f0 * 100 < haptics->f0_preset * (100 - haptics->f0_cali_percent) ||
+ f0 * 100 > haptics->f0_preset * (100 + haptics->f0_cali_percent)) {
+ f0_limit = (int)haptics->f0_preset;
+ } else {
+ f0_limit = (int)f0;
+ }
+
+ /* calculate cali step */
+ f0_cali_step = 100000 * (f0_limit - (int)haptics->f0_preset) /
+ (f0_limit * 25);
+
+ if (f0_cali_step >= 0) {
+ if (f0_cali_step % 10 >= 5)
+ f0_cali_step = f0_cali_step / 10 + 1 + 32;
+ else
+ f0_cali_step = f0_cali_step / 10 + 32;
+ } else {
+ if (f0_cali_step % 10 <= -5)
+ f0_cali_step = 32 + (f0_cali_step / 10 - 1);
+ else
+ f0_cali_step = 32 + f0_cali_step / 10;
+ }
+
+ if (f0_cali_step > 31)
+ f0_cali_lra = (char)f0_cali_step - 32;
+ else
+ f0_cali_lra = (char)f0_cali_step + 32;
+
+ err = regmap_write(haptics->regmap, AW8695_TRIM_LRA, f0_cali_lra);
+ if (err)
+ return err;
+
+ err = regmap_read(haptics->regmap, AW8695_TRIM_LRA, &read_buf);
+ if (err)
+ return err;
+
+ dev_dbg(dev, "Calibrated TRIM_LRA: %x\n", read_buf);
+
+ /* restore default work mode */
+ err = aw8695_set_work_mode(haptics, AW8695_STANDBY_MODE);
+ if (err)
+ return err;
+ err = regmap_update_bits(haptics->regmap, AW8695_SYSCTRL,
+ AW8695_SYSCTRL_PLAY_MODE_MASK, AW8695_SYSCTRL_PLAY_MODE_RAM);
+ if (err)
+ return err;
+
+ return aw8695_haptics_stop(haptics);
+}
+
+static int aw8695_init(struct aw8695_data *haptics)
+{
+ int err;
+ unsigned int read_buf;
+ struct device *dev = &haptics->client->dev;
+
+ aw8695_hw_reset(haptics);
+
+ err = regmap_read(haptics->regmap, AW8695_ID, &read_buf);
+ if (err) {
+ dev_err(dev, "Failed to read ID register: %d\n", err);
+ return err;
+ }
+
+ if (read_buf != AW8695_CHIPID) {
+ dev_err(dev, "Chip ID mismatch: expected %x, got %x\n",
+ AW8695_CHIPID, read_buf);
+ return -ENODEV;
+ }
+
+ err = regmap_write(haptics->regmap, AW8695_ID, AW8695_RESET);
+ if (err) {
+ dev_err(dev, "Failed to reset: %d\n", err);
+ return err;
+ }
+
+ /* Wait ~1ms after reset */
+ usleep_range(1000, 1500);
+
+ /* Clear UVLI bit by reading register */
+ err = aw8695_interrupt_clear(haptics);
+ if (err) {
+ dev_err(dev, "Failed to clear interrupt: %d\n", err);
+ return err;
+ }
+
+ /* Set interrupt mode to edge */
+ err = regmap_update_bits(haptics->regmap, AW8695_DBGCTRL,
+ AW8695_DBGCTRL_INT_MODE_MASK,
+ AW8695_DBGCTRL_INT_MODE_EDGE);
+ if (err) {
+ dev_err(dev, "Failed to set interrupt mode: %d\n", err);
+ return err;
+ }
+
+ /* Configure interrupts */
+ err = regmap_update_bits(haptics->regmap, AW8695_SYSINTM,
+ AW8695_SYSINTM_BSTERR_OFF, AW8695_SYSINTM_BSTERR_OFF);
+ if (err)
+ return err;
+ err = regmap_update_bits(haptics->regmap, AW8695_SYSINTM,
+ AW8695_SYSINTM_OV_OFF, 0);
+ if (err)
+ return err;
+ err = regmap_update_bits(haptics->regmap, AW8695_SYSINTM,
+ AW8695_SYSINTM_UVLO_OFF, 0);
+ if (err)
+ return err;
+ err = regmap_update_bits(haptics->regmap, AW8695_SYSINTM,
+ AW8695_SYSINTM_OCD_OFF, 0);
+ if (err)
+ return err;
+ err = regmap_update_bits(haptics->regmap, AW8695_SYSINTM,
+ AW8695_SYSINTM_OT_OFF, 0);
+ if (err)
+ return err;
+
+ err = aw8695_set_work_mode(haptics, AW8695_STANDBY_MODE);
+ if (err)
+ return err;
+
+ err = regmap_update_bits(haptics->regmap, AW8695_PWMDBG,
+ AW8695_PWMDBG_PWM_MODE_MASK, AW8695_PWMDBG_PWM_24K);
+ if (err)
+ return err;
+
+ err = regmap_write(haptics->regmap, AW8695_BSTDBG1, haptics->boost_debug[0]);
+ if (err)
+ return err;
+ err = regmap_write(haptics->regmap, AW8695_BSTDBG2, haptics->boost_debug[1]);
+ if (err)
+ return err;
+ err = regmap_write(haptics->regmap, AW8695_BSTDBG3, haptics->boost_debug[2]);
+ if (err)
+ return err;
+ err = regmap_write(haptics->regmap, AW8695_TSET, haptics->tset);
+ if (err)
+ return err;
+ err = regmap_write(haptics->regmap, AW8695_R_SPARE, haptics->r_spare);
+ if (err)
+ return err;
+
+ err = regmap_update_bits(haptics->regmap, AW8695_ANADBG,
+ AW8695_ANADBG_IOC_MASK, AW8695_ANADBG_IOC_4P65A);
+ if (err)
+ return err;
+
+ /* Set boost peak current */
+ err = regmap_update_bits(haptics->regmap, AW8695_BSTCFG,
+ AW8695_BSTCFG_PEAKCUR_MASK, AW8695_BSTCFG_PEAKCUR_2A);
+ if (err)
+ return err;
+
+ /* Adjust motorprotect config */
+ err = regmap_update_bits(haptics->regmap, AW8695_DETCTRL,
+ AW8695_DETCTRL_PROTECT_MASK, AW8695_DETCTRL_PROTECT_NO_ACTION);
+ if (err)
+ return err;
+ err = regmap_update_bits(haptics->regmap, AW8695_PWMPRC,
+ AW8695_PWMPRC_PRC_ENABLE, 0);
+ if (err)
+ return err;
+ err = regmap_update_bits(haptics->regmap, AW8695_PRLVL,
+ AW8695_PRLVL_PR_ENABLE, 0);
+ if (err)
+ return err;
+
+ /* Adjust auto boost config */
+ err = regmap_update_bits(haptics->regmap, AW8695_BST_AUTO,
+ AW8695_BST_AUTO_BST_AUTOSW_MASK,
+ AW8695_BST_AUTO_BST_MANUAL_BOOST);
+ if (err)
+ return err;
+
+ err = aw8695_haptic_offset_calibration(haptics);
+ if (err)
+ return err;
+
+ /* Set vbat compensation mode */
+ err = regmap_update_bits(haptics->regmap, AW8695_ADCTEST,
+ AW8695_ADCTEST_VBAT_MODE_MASK, AW8695_ADCTEST_VBAT_HW_COMP);
+ if (err)
+ return err;
+
+ err = aw8695_haptic_f0_calibration(haptics);
+ if (err)
+ return err;
+
+ /* beme config */
+ err = regmap_write(haptics->regmap, AW8695_BEMF_VTHH_H,
+ FIELD_GET(AW8695_HIGH_MASK, haptics->bemf_vthh));
+ if (err)
+ return err;
+ err = regmap_write(haptics->regmap, AW8695_BEMF_VTHH_L,
+ FIELD_GET(AW8695_LOW_MASK, haptics->bemf_vthh));
+ if (err)
+ return err;
+ err = regmap_write(haptics->regmap, AW8695_BEMF_VTHL_H,
+ FIELD_GET(AW8695_HIGH_MASK, haptics->bemf_vthl));
+ if (err)
+ return err;
+ return regmap_write(haptics->regmap, AW8695_BEMF_VTHL_L,
+ FIELD_GET(AW8695_LOW_MASK, haptics->bemf_vthl));
+}
+
+static int aw8695_ram_init(struct aw8695_data *haptics)
+{
+ unsigned char *ptr;
+ int err;
+ int i;
+
+ /* Enable SRAM init */
+ err = regmap_update_bits(haptics->regmap, AW8695_SYSCTRL,
+ AW8695_SYSCTRL_RAMINIT_EN, AW8695_SYSCTRL_RAMINIT_EN);
+ if (err)
+ return err;
+
+ /* Set RAMDATA write address */
+ err = regmap_write(haptics->regmap, AW8695_RAMADDRH,
+ FIELD_GET(AW8695_HIGH_MASK, AW8695_RAM_BASE_ADDR));
+ if (err)
+ return err;
+ err = regmap_write(haptics->regmap, AW8695_RAMADDRL,
+ FIELD_GET(AW8695_LOW_MASK, AW8695_RAM_BASE_ADDR));
+ if (err)
+ return err;
+
+ /* Write waveform header */
+ ptr = (unsigned char *) &sram_waveform_header;
+ for (i = 0; i < sizeof(sram_waveform_header); i++) {
+ err = regmap_write(haptics->regmap, AW8695_RAMDATA,
+ ptr[i]);
+ if (err)
+ return err;
+ }
+
+ /* Write waveform data */
+ for (i = 0; i < ARRAY_SIZE(aw8695_sine_waveform); i++) {
+ err = regmap_write(haptics->regmap, AW8695_RAMDATA,
+ aw8695_sine_waveform[i]);
+ if (err)
+ return err;
+ }
+
+ /* Disable SRAM init */
+ return regmap_update_bits(haptics->regmap, AW8695_SYSCTRL,
+ AW8695_SYSCTRL_RAMINIT_EN, 0);
+}
+
+static irqreturn_t aw8695_irq(int irq, void *data)
+{
+ struct aw8695_data *haptics = data;
+ struct device *dev = &haptics->client->dev;
+ unsigned int read_buf;
+ int err;
+
+ err = regmap_read(haptics->regmap, AW8695_SYSINT, &read_buf);
+ if (err) {
+ dev_err(dev, "Failed to read SYSINT register: %d\n", err);
+ return err;
+ }
+ dev_dbg(dev, "Interrupt: SYSINT=0x%x\n", read_buf);
+
+ if (read_buf & AW8695_SYSINT_BSTERRI)
+ dev_err(dev, "Received boost short circuit protection or over-voltage protection interrupt!\n");
+ if (read_buf & AW8695_SYSINT_OVI)
+ dev_err(dev, "Received wave data overflow or DPWM DC error interrupt!\n");
+ if (read_buf & AW8695_SYSINT_UVLI)
+ dev_err(dev, "Received under voltage lock out interrupt!\n");
+ if (read_buf & AW8695_SYSINT_OCDI)
+ dev_err(dev, "Received over current interrupt!\n");
+ if (read_buf & AW8695_SYSINT_OTI)
+ dev_err(dev, "Received over temperature interrupt!\n");
+
+ if (read_buf & AW8695_SYSINT_DONEI)
+ dev_dbg(dev, "Received playback done interrupt\n");
+ /* FIFO mode is not (yet) implemented in this driver */
+ if (read_buf & AW8695_SYSINT_FF_AEI)
+ dev_dbg(dev, "Received FIFO almost empty interrupt\n");
+ if (read_buf & AW8695_SYSINT_FF_AFI)
+ dev_dbg(dev, "Received FIFO almost full interrupt\n");
+
+ err = regmap_read(haptics->regmap, AW8695_DBGSTAT, &read_buf);
+ if (err) {
+ dev_err(dev, "Failed to read DBGSTAT register: %d\n", err);
+ return err;
+ }
+ dev_dbg(dev, "Interrupt: DBGSTAT=0x%x\n", read_buf);
+
+ err = regmap_read(haptics->regmap, AW8695_SYSST, &read_buf);
+ if (err) {
+ dev_err(dev, "Failed to read SYSST register: %d\n", err);
+ return err;
+ }
+ dev_dbg(dev, "Interrupt: SYSST=0x%x\n", read_buf);
+
+ return IRQ_HANDLED;
+}
+
+static const struct regmap_config aw8695_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = AW8695_MAX_REG,
+ .cache_type = REGCACHE_NONE,
+};
+
+static int aw8695_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct aw8695_data *haptics;
+ int err;
+
+ haptics = devm_kzalloc(dev, sizeof(*haptics), GFP_KERNEL);
+ if (!haptics)
+ return -ENOMEM;
+
+ err = of_property_read_u32(dev->of_node, "awinic,f0-preset", &haptics->f0_preset);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to read awinic,f0-preset\n");
+
+ err = of_property_read_u32(dev->of_node, "awinic,f0-coefficient",
+ &haptics->f0_coefficient);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to read awinic,f0-coefficient\n");
+
+ err = of_property_read_u32(dev->of_node, "awinic,f0-calibration-percent",
+ &haptics->f0_cali_percent);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to read awinic,f0-coefficient\n");
+
+ err = of_property_read_u32(dev->of_node, "awinic,drive-level", &haptics->drive_level);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to read awinic,drive-level\n");
+
+ err = of_property_read_u32(dev->of_node, "awinic,f0-detection-play-time",
+ &haptics->f0_det_play);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to read awinic,f0-detection-play-time\n");
+
+ err = of_property_read_u32(dev->of_node, "awinic,f0-detection-wait-time",
+ &haptics->f0_det_wait);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to read awinic,f0-detection-wait-time\n");
+
+ err = of_property_read_u32(dev->of_node, "awinic,f0-detection-repeat",
+ &haptics->f0_det_repeat);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to read awinic,f0-detection-repeat\n");
+
+ err = of_property_read_u32(dev->of_node, "awinic,f0-detection-trace",
+ &haptics->f0_det_trace);
+ if (err)
+ dev_err_probe(dev, err, "Failed to read awinic,f0-detection-trace\n");
+
+ err = of_property_read_u8_array(dev->of_node, "awinic,boost-debug",
+ haptics->boost_debug, ARRAY_SIZE(haptics->boost_debug));
+ if (err)
+ return dev_err_probe(dev, err, "Failed to read awinic,boost-debug\n");
+
+ err = of_property_read_u8(dev->of_node, "awinic,tset", &haptics->tset);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to read awinic,tset\n");
+
+ err = of_property_read_u8(dev->of_node, "awinic,r-spare", &haptics->r_spare);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to read awinic,r-spare\n");
+
+ err = of_property_read_u32(dev->of_node, "awinic,bemf-upper-threshold",
+ &haptics->bemf_vthh);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to read awinic,bemf-upper-threshold\n");
+
+ err = of_property_read_u32(dev->of_node, "awinic,bemf-lower-threshold",
+ &haptics->bemf_vthl);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to read awinic,bemf-lower-threshold\n");
+
+ haptics->input_dev = devm_input_allocate_device(dev);
+ if (!haptics->input_dev)
+ return -ENOMEM;
+
+ haptics->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(haptics->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(haptics->reset_gpio),
+ "Failed to get reset gpio\n");
+
+ err = devm_request_threaded_irq(dev, client->irq, NULL, aw8695_irq,
+ IRQF_ONESHOT, NULL, haptics);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to request interrupt\n");
+
+ INIT_WORK(&haptics->play_work, aw8695_haptics_play_work);
+
+ haptics->input_dev->name = "aw8695-haptics";
+ haptics->input_dev->close = aw8695_close;
+
+ input_set_drvdata(haptics->input_dev, haptics);
+ input_set_capability(haptics->input_dev, EV_FF, FF_RUMBLE);
+
+ err = input_ff_create_memless(haptics->input_dev, NULL,
+ aw8695_haptics_play);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to create FF dev\n");
+
+ haptics->client = client;
+ i2c_set_clientdata(client, haptics);
+
+ haptics->regmap = devm_regmap_init_i2c(client, &aw8695_regmap_config);
+ if (IS_ERR(haptics->regmap))
+ return dev_err_probe(dev, PTR_ERR(haptics->regmap),
+ "Failed to allocate register map\n");
+
+ err = aw8695_init(haptics);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to init aw8695\n");
+
+ err = aw8695_ram_init(haptics);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to init aw8695 sram\n");
+
+ err = input_register_device(haptics->input_dev);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to register input device\n");
+
+ return 0;
+}
+
+static const struct of_device_id aw8695_of_id[] = {
+ { .compatible = "awinic,aw8695", },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, aw8695_of_id);
+
+static struct i2c_driver aw8695_driver = {
+ .driver = {
+ .name = "aw8695-haptics",
+ .of_match_table = aw8695_of_id,
+ },
+ .probe = aw8695_probe,
+};
+
+module_i2c_driver(aw8695_driver);
+
+MODULE_AUTHOR("Luca Weiss <luca.weiss@xxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("AW8695 LRA Haptic Driver");
+MODULE_LICENSE("GPL");
--
2.35.1
