Re: [PATCH 16/22] dvb-usb: Replace comments with C99 initializers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Em Sat, 26 Mar 2022 15:11:46 -0500
Larry Finger <Larry.Finger@xxxxxxxxxxxx> escreveu:

> On 3/26/22 14:51, Joe Perches wrote:
> > On Sat, 2022-03-26 at 19:27 +0100, Mauro Carvalho Chehab wrote:  
> >> Em Sat, 26 Mar 2022 19:24:54 +0100
> >> Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> escreveu:
> >>  
> >>> Em Sat, 26 Mar 2022 17:59:03 +0100
> >>> Benjamin Stürz <benni@xxxxxxxxxx> escreveu:
> >>>  
> >>>> This replaces comments with C99's designated
> >>>> initializers because the kernel supports them now.
> >>>>
> >>>> Signed-off-by: Benjamin Stürz <benni@xxxxxxxxxx>
> >>>> ---
> >>>>   drivers/media/usb/dvb-usb/dibusb-mb.c | 62 +++++++++++++--------------
> >>>>   drivers/media/usb/dvb-usb/dibusb-mc.c | 34 +++++++--------
> >>>>   2 files changed, 48 insertions(+), 48 deletions(-)
> >>>>
> >>>> diff --git a/drivers/media/usb/dvb-usb/dibusb-mb.c b/drivers/media/usb/dvb-usb/dibusb-mb.c
> >>>> index e9dc27f73970..f188e07f518b 100644
> >>>> --- a/drivers/media/usb/dvb-usb/dibusb-mb.c
> >>>> +++ b/drivers/media/usb/dvb-usb/dibusb-mb.c
> >>>> @@ -122,40 +122,40 @@ static int dibusb_probe(struct usb_interface *intf,
> >>>>   
> >>>>   /* do not change the order of the ID table */
> >>>>   static struct usb_device_id dibusb_dib3000mb_table [] = {
> >>>> -/* 00 */	{ USB_DEVICE(USB_VID_WIDEVIEW,		USB_PID_AVERMEDIA_DVBT_USB_COLD) },
> >>>> -/* 01 */	{ USB_DEVICE(USB_VID_WIDEVIEW,		USB_PID_AVERMEDIA_DVBT_USB_WARM) },
> >>>> -/* 02 */	{ USB_DEVICE(USB_VID_COMPRO,		USB_PID_COMPRO_DVBU2000_COLD) },
> >>>> -/* 03 */	{ USB_DEVICE(USB_VID_COMPRO,		USB_PID_COMPRO_DVBU2000_WARM) },
> >>>> -/* 04 */	{ USB_DEVICE(USB_VID_COMPRO_UNK,	USB_PID_COMPRO_DVBU2000_UNK_COLD) },
> >>>> -/* 05 */	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3000_COLD) },
> >>>> -/* 06 */	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3000_WARM) },
> >>>> -/* 07 */	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_KWORLD_VSTREAM_COLD) },
> >>>> -/* 08 */	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_KWORLD_VSTREAM_WARM) },
> >>>> -/* 09 */	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_GRANDTEC_DVBT_USB_COLD) },
> >>>> -/* 10 */	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_GRANDTEC_DVBT_USB_WARM) },
> >>>> -/* 11 */	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_DIBCOM_MOD3000_COLD) },
> >>>> -/* 12 */	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_DIBCOM_MOD3000_WARM) },
> >>>> -/* 13 */	{ USB_DEVICE(USB_VID_HYPER_PALTEK,	USB_PID_UNK_HYPER_PALTEK_COLD) },
> >>>> -/* 14 */	{ USB_DEVICE(USB_VID_HYPER_PALTEK,	USB_PID_UNK_HYPER_PALTEK_WARM) },
> >>>> -/* 15 */	{ USB_DEVICE(USB_VID_VISIONPLUS,	USB_PID_TWINHAN_VP7041_COLD) },
> >>>> -/* 16 */	{ USB_DEVICE(USB_VID_VISIONPLUS,	USB_PID_TWINHAN_VP7041_WARM) },
> >>>> -/* 17 */	{ USB_DEVICE(USB_VID_TWINHAN,		USB_PID_TWINHAN_VP7041_COLD) },
> >>>> -/* 18 */	{ USB_DEVICE(USB_VID_TWINHAN,		USB_PID_TWINHAN_VP7041_WARM) },
> >>>> -/* 19 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_COLD) },
> >>>> -/* 20 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_WARM) },
> >>>> -/* 21 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_AN2235_COLD) },
> >>>> -/* 22 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_AN2235_WARM) },
> >>>> -/* 23 */	{ USB_DEVICE(USB_VID_ADSTECH,		USB_PID_ADSTECH_USB2_COLD) },
> >>>> +[0]  =	{ USB_DEVICE(USB_VID_WIDEVIEW,		USB_PID_AVERMEDIA_DVBT_USB_COLD) },
> >>>> +[1]  =	{ USB_DEVICE(USB_VID_WIDEVIEW,		USB_PID_AVERMEDIA_DVBT_USB_WARM) },  
> >>>
> >>> While here, please properly indent this table, and respect the 80-columns limit,
> >>> e. g.:
> >>>
> >>> static struct usb_device_id dibusb_dib3000mb_table [] = {
> >>> 	[0] = { USB_DEVICE(USB_VID_WIDEVIEW
> >>> 			   USB_PID_AVERMEDIA_DVBT_USB_COLD)
> >>> 	},
> >>> 	[1]  =	{ USB_DEVICE(USB_VID_WIDEVIEW,
> >>> 			     USB_PID_AVERMEDIA_DVBT_USB_WARM)
> >>> 	},
> >>> 	...  
> >>
> >> Err.... something went wrong with my space bar and I ended hitting send to
> >> soon... I meant:
> >>
> >> static struct usb_device_id dibusb_dib3000mb_table [] = {
> >>   	[0] = { USB_DEVICE(USB_VID_WIDEVIEW
> >>   			   USB_PID_AVERMEDIA_DVBT_USB_COLD)
> >>   	},
> >>   	[1] = { USB_DEVICE(USB_VID_WIDEVIEW,
> >>   			   USB_PID_AVERMEDIA_DVBT_USB_WARM)
> >>   	},
> >> 	...
> >> };  
> > 
> > maybe static const too
> > 
> > and
> > 
> > maybe
> > 
> > #define DIB_DEVICE(vid, pid)	\
> > 	{ USB_DEVICE(USB_VID_ ## vid, USB_PID_ ## pid) }
> > 
> > so maybe
> > 
> > static const struct usb_device_id dibusb_dib3000mb_table[] = {
> > 	[0] = DIB_DEVICE(WIDEVIEW, AVERMEDIA_DVBT_USB_COLD),
> > 	[1] = DIB_DEVICE(WIDEVIEW, AVERMEDIA_DVBT_USB_WARM),
> > 	...
> > };
> > 
> > though I _really_ doubt the value of the specific indexing.
> > 
> > I think this isn't really worth changing at all.  
> 
> I agree. For the drivers that I maintain, I try to keep the vendor and device 
> ids in numerical order. As this table does not require a special order, adding a 
> new one in the middle would require redoing all of then after that point. That 
> would be pointless work!

Unfortunately, that's not the case for drivers that use the legacy dvb-usb
core, as it has other tables that reference the device IDs from this table
by number.

The best here would be to do something like:

enum {
	AVERMEDIA_DVBT_USB_COLD,
	AVERMEDIA_DVBT_USB_WARM,
	COMPRO_DVBU2000_COLD,
	COMPRO_DVBU2000_WARM,
	COMPRO_DVBU2000_UNK_COLD,
	DIBCOM_MOD3000_COLD,
	DIBCOM_MOD3000_WARM,
	KWORLD_VSTREAM_COLD,
	KWORLD_VSTREAM_WARM,
	GRANDTEC_DVBT_USB_COLD,
	GRANDTEC_DVBT_USB_WARM,
	DIBCOM_MOD3000_COLD,
	DIBCOM_MOD3000_WARM,
	UNK_HYPER_PALTEK_COLD,
	UNK_HYPER_PALTEK_WARM,
	TWINHAN_VP7041_COLD,
	TWINHAN_VP7041_WARM,
	TWINHAN_VP7041_COLD,
	TWINHAN_VP7041_WARM,
	ULTIMA_TVBOX_COLD,
	ULTIMA_TVBOX_WARM,
	ULTIMA_TVBOX_AN2235_COLD,
	ULTIMA_TVBOX_AN2235_WARM,
	ADSTECH_USB2_COLD,
	ADSTECH_USB2_WARM,
	KYE_DVB_T_COLD,
	KYE_DVB_T_WARM,
	KWORLD_VSTREAM_COLD,
	ULTIMA_TVBOX_USB2_COLD,
	ULTIMA_TVBOX_USB2_WARM,
	ULTIMA_TVBOX_ANCHOR_COLD,
};

Then define the table as:

static const struct usb_device_id dibusb_dib3000mb_table[] 
{
  	[AVERMEDIA_DVBT_USB_COLD] = { USB_DEVICE(USB_VID_WIDEVIEW,
				      USB_PID_AVERMEDIA_DVBT_USB_COLD)
  	},
  	[AVERMEDIA_DVBT_USB_WARM] = { USB_DEVICE(USB_VID_WIDEVIEW,
				      USB_PID_AVERMEDIA_DVBT_USB_WARM)
  	},
	...
}

(eventually, using some macro to help defining them)

Finally, change the other static tables to also use the same name,
e. g.:

static const struct dvb_usb_device_properties dibusb1_1_properties = {
	...
	.num_device_descs = 9,
	.devices = {
		{	"AVerMedia AverTV DVBT USB1.1",
			{ &dibusb_dib3000mb_table[AVERMEDIA_DVBT_USB_COLD],  NULL },
			{ &dibusb_dib3000mb_table[AVERMEDIA_DVBT_USB_WARM],  NULL },
		},

	...
};

The same applies to other drivers inside drivers/media/usb/dvb-usb/.

Alternatively, the drivers there should be ported to the newer DVB USB
core (dvb-usb-v2).

Thanks,
Mauro




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux