This adds device tree bindings for the Immersion ISA1200 haptic feedback unit. Cc: phone-devel@xxxxxxxxxxxxxxx Cc: devicetree@xxxxxxxxxxxxxxx Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- .../bindings/input/immersion,isa1200.yaml | 74 +++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/immersion,isa1200.yaml diff --git a/Documentation/devicetree/bindings/input/immersion,isa1200.yaml b/Documentation/devicetree/bindings/input/immersion,isa1200.yaml new file mode 100644 index 000000000000..e6bbefce74a8 --- /dev/null +++ b/Documentation/devicetree/bindings/input/immersion,isa1200.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/immersion,isa1200.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Immersion ISA1200 Haptic Feedback Unit + +maintainers: + - Linus Walleij <linus.walleij@xxxxxxxxxx> + +description: + The Immersion ISA1200 is a haptic feedback chip using two motors of + LRA or ERM type. It can generate a PWM signal to control the motors from + a fixed input clock, or it can amplify and modify an existing PWM + input. It is communicating with the host system using I2C. + +properties: + compatible: + description: One compatible per product using this chip. Each product + need deliberate custom values for things such as LRA resonance + frequency and these are not stored in the device tree, rather we + let the operating system look up the appropriate parameters from a + table. + enum: + - immersion,isa1200-janice + - immersion,isa1200-gavini + + reg: + description: I2C address for the ISA1200 + + hen-gpios: + description: GPIO line that drives the HEN (Motor Hardware Enable) pin + on the chip. + maxItems: 1 + + len-gpios: + description: GPIO line that drives the LEN (LDO Enable) pin on the chip. + maxItems: 1 + + clocks: + description: Clock that drives the chip if using the chip to generate a + PWM from a clock. Either clocks or pwms must be defined. + maxItems: 1 + + pwms: + description: PWM that drives the chip if using an external PWM generator. + Either pwms or clocks must be defined. + maxItems: 1 + +required: + - compatible + - reg + - hen-gpios + - len-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + haptic@49 { + compatible = "immersion,isa1200-janice"; + reg = <0x49>; + hen-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; + len-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; + clocks = <&clkout_clk>; + }; + }; -- 2.35.1
