The power button on Cherry Trail systems with an AXP288 PMIC is connected
to both the power button pin of the PMIC as well as to a power button GPIO
on the Cherry Trail SoC itself. This leads to double power button event
reporting which is a problem.
Since reporting power button presses through the PMIC is not supported on
all PMICs used on Cherry Trail systems, we want to keep the GPIO
power button events, so the axp20x-pek code checks for the presence of
a GPIO power button and in that case does not register its input-device.
On most systems the GPIO power button also can wake-up the system from
suspend, so the axp20x-pek driver would also not register its interrupt
handler. But on some systems there was a bug causing wakeup by the GPIO
power button handler to not work.
Commit 9747070c11d6 ("Input: axp20x-pek - always register interrupt
handlers") was added as a work around for this registering the axp20x-pek
interrupts, but not the input-device on Cherry Trail systems.
In the mean time the root-cause of the GPIO power button wakeup events
not working has been found and fixed by the "pinctrl: cherryview: Do not
allow the same interrupt line to be used by 2 pins" patch,
so this is no longer necessary.
This reverts the workaround going back to only registering the
interrupt handlers on systems where we also register the input-device.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/input/misc/axp20x-pek.c | 72 ++++++++++++++++-----------------
1 file changed, 35 insertions(+), 37 deletions(-)
diff --git a/drivers/input/misc/axp20x-pek.c b/drivers/input/misc/axp20x-pek.c
index e09b1fae42e1..04da7916eb70 100644
--- a/drivers/input/misc/axp20x-pek.c
+++ b/drivers/input/misc/axp20x-pek.c
@@ -206,11 +206,8 @@ ATTRIBUTE_GROUPS(axp20x);
static irqreturn_t axp20x_pek_irq(int irq, void *pwr)
{
- struct axp20x_pek *axp20x_pek = pwr;
- struct input_dev *idev = axp20x_pek->input;
-
- if (!idev)
- return IRQ_HANDLED;
+ struct input_dev *idev = pwr;
+ struct axp20x_pek *axp20x_pek = input_get_drvdata(idev);
/*
* The power-button is connected to ground so a falling edge (dbf)
@@ -229,9 +226,22 @@ static irqreturn_t axp20x_pek_irq(int irq, void *pwr)
static int axp20x_pek_probe_input_device(struct axp20x_pek *axp20x_pek,
struct platform_device *pdev)
{
+ struct axp20x_dev *axp20x = axp20x_pek->axp20x;
struct input_dev *idev;
int error;
+ axp20x_pek->irq_dbr = platform_get_irq_byname(pdev, "PEK_DBR");
+ if (axp20x_pek->irq_dbr < 0)
+ return axp20x_pek->irq_dbr;
+ axp20x_pek->irq_dbr = regmap_irq_get_virq(axp20x->regmap_irqc,
+ axp20x_pek->irq_dbr);
+
+ axp20x_pek->irq_dbf = platform_get_irq_byname(pdev, "PEK_DBF");
+ if (axp20x_pek->irq_dbf < 0)
+ return axp20x_pek->irq_dbf;
+ axp20x_pek->irq_dbf = regmap_irq_get_virq(axp20x->regmap_irqc,
+ axp20x_pek->irq_dbf);
+
axp20x_pek->input = devm_input_allocate_device(&pdev->dev);
if (!axp20x_pek->input)
return -ENOMEM;
@@ -246,6 +256,24 @@ static int axp20x_pek_probe_input_device(struct axp20x_pek *axp20x_pek,
input_set_drvdata(idev, axp20x_pek);
+ error = devm_request_any_context_irq(&pdev->dev, axp20x_pek->irq_dbr,
+ axp20x_pek_irq, 0,
+ "axp20x-pek-dbr", idev);
+ if (error < 0) {
+ dev_err(&pdev->dev, "Failed to request dbr IRQ#%d: %d\n",
+ axp20x_pek->irq_dbr, error);
+ return error;
+ }
+
+ error = devm_request_any_context_irq(&pdev->dev, axp20x_pek->irq_dbf,
+ axp20x_pek_irq, 0,
+ "axp20x-pek-dbf", idev);
+ if (error < 0) {
+ dev_err(&pdev->dev, "Failed to request dbf IRQ#%d: %d\n",
+ axp20x_pek->irq_dbf, error);
+ return error;
+ }
+
error = input_register_device(idev);
if (error) {
dev_err(&pdev->dev, "Can't register input device: %d\n",
@@ -253,6 +281,8 @@ static int axp20x_pek_probe_input_device(struct axp20x_pek *axp20x_pek,
return error;
}
+ device_init_wakeup(&pdev->dev, true);
+
return 0;
}
@@ -293,18 +323,6 @@ static int axp20x_pek_probe(struct platform_device *pdev)
axp20x_pek->axp20x = dev_get_drvdata(pdev->dev.parent);
- axp20x_pek->irq_dbr = platform_get_irq_byname(pdev, "PEK_DBR");
- if (axp20x_pek->irq_dbr < 0)
- return axp20x_pek->irq_dbr;
- axp20x_pek->irq_dbr = regmap_irq_get_virq(
- axp20x_pek->axp20x->regmap_irqc, axp20x_pek->irq_dbr);
-
- axp20x_pek->irq_dbf = platform_get_irq_byname(pdev, "PEK_DBF");
- if (axp20x_pek->irq_dbf < 0)
- return axp20x_pek->irq_dbf;
- axp20x_pek->irq_dbf = regmap_irq_get_virq(
- axp20x_pek->axp20x->regmap_irqc, axp20x_pek->irq_dbf);
-
if (axp20x_pek_should_register_input(axp20x_pek)) {
error = axp20x_pek_probe_input_device(axp20x_pek, pdev);
if (error)
@@ -313,26 +331,6 @@ static int axp20x_pek_probe(struct platform_device *pdev)
axp20x_pek->info = (struct axp20x_info *)match->driver_data;
- error = devm_request_any_context_irq(&pdev->dev, axp20x_pek->irq_dbr,
- axp20x_pek_irq, 0,
- "axp20x-pek-dbr", axp20x_pek);
- if (error < 0) {
- dev_err(&pdev->dev, "Failed to request dbr IRQ#%d: %d\n",
- axp20x_pek->irq_dbr, error);
- return error;
- }
-
- error = devm_request_any_context_irq(&pdev->dev, axp20x_pek->irq_dbf,
- axp20x_pek_irq, 0,
- "axp20x-pek-dbf", axp20x_pek);
- if (error < 0) {
- dev_err(&pdev->dev, "Failed to request dbf IRQ#%d: %d\n",
- axp20x_pek->irq_dbf, error);
- return error;
- }
-
- device_init_wakeup(&pdev->dev, true);
-
platform_set_drvdata(pdev, axp20x_pek);
return 0;
--
2.33.1
