From: Johnny Chuang <johnny.chuang.emc@xxxxxxxxx> [ Upstream commit 4ebfee2bbc1a9c343dd50565ba5ae249fac32267 ] The eKTH3900/eKTH5312 series do not support the firmware update rules of Remark ID. Exclude these two series from checking it when updating the firmware in touch controllers. Signed-off-by: Johnny Chuang <johnny.chuang.emc@xxxxxxxxx> Link: https://lore.kernel.org/r/1639619603-20616-1-git-send-email-johnny.chuang.emc@xxxxxxxxx Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/input/touchscreen/elants_i2c.c | 46 +++++++++++++++++++++++++- 1 file changed, 45 insertions(+), 1 deletion(-) diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c index 68f542bb809f4..b9e2219efbb8f 100644 --- a/drivers/input/touchscreen/elants_i2c.c +++ b/drivers/input/touchscreen/elants_i2c.c @@ -117,6 +117,19 @@ #define ELAN_POWERON_DELAY_USEC 500 #define ELAN_RESET_DELAY_MSEC 20 +/* FW boot code version */ +#define BC_VER_H_BYTE_FOR_EKTH3900x1_I2C 0x72 +#define BC_VER_H_BYTE_FOR_EKTH3900x2_I2C 0x82 +#define BC_VER_H_BYTE_FOR_EKTH3900x3_I2C 0x92 +#define BC_VER_H_BYTE_FOR_EKTH5312x1_I2C 0x6D +#define BC_VER_H_BYTE_FOR_EKTH5312x2_I2C 0x6E +#define BC_VER_H_BYTE_FOR_EKTH5312cx1_I2C 0x77 +#define BC_VER_H_BYTE_FOR_EKTH5312cx2_I2C 0x78 +#define BC_VER_H_BYTE_FOR_EKTH5312x1_I2C_USB 0x67 +#define BC_VER_H_BYTE_FOR_EKTH5312x2_I2C_USB 0x68 +#define BC_VER_H_BYTE_FOR_EKTH5312cx1_I2C_USB 0x74 +#define BC_VER_H_BYTE_FOR_EKTH5312cx2_I2C_USB 0x75 + enum elants_chip_id { EKTH3500, EKTF3624, @@ -736,6 +749,37 @@ static int elants_i2c_validate_remark_id(struct elants_data *ts, return 0; } +static bool elants_i2c_should_check_remark_id(struct elants_data *ts) +{ + struct i2c_client *client = ts->client; + const u8 bootcode_version = ts->iap_version; + bool check; + + /* I2C eKTH3900 and eKTH5312 are NOT support Remark ID */ + if ((bootcode_version == BC_VER_H_BYTE_FOR_EKTH3900x1_I2C) || + (bootcode_version == BC_VER_H_BYTE_FOR_EKTH3900x2_I2C) || + (bootcode_version == BC_VER_H_BYTE_FOR_EKTH3900x3_I2C) || + (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312x1_I2C) || + (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312x2_I2C) || + (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312cx1_I2C) || + (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312cx2_I2C) || + (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312x1_I2C_USB) || + (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312x2_I2C_USB) || + (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312cx1_I2C_USB) || + (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312cx2_I2C_USB)) { + dev_dbg(&client->dev, + "eKTH3900/eKTH5312(0x%02x) are not support remark id\n", + bootcode_version); + check = false; + } else if (bootcode_version >= 0x60) { + check = true; + } else { + check = false; + } + + return check; +} + static int elants_i2c_do_update_firmware(struct i2c_client *client, const struct firmware *fw, bool force) @@ -749,7 +793,7 @@ static int elants_i2c_do_update_firmware(struct i2c_client *client, u16 send_id; int page, n_fw_pages; int error; - bool check_remark_id = ts->iap_version >= 0x60; + bool check_remark_id = elants_i2c_should_check_remark_id(ts); /* Recovery mode detection! */ if (force) { -- 2.34.1
