On Thu, 02 Dec 2021 22:20:19 +1000, Alistair Francis wrote: > From: Mylène Josserand <mylene.josserand@xxxxxxxxxxxxxxxxxx> > > Add the Cypress TrueTouch Generation 5 touchscreen device tree bindings > documentation. It can use I2C or SPI bus. > This touchscreen can handle some defined zone that are designed and > sent as button. To be able to customize the keycode sent, the > "linux,code" property in a "button" sub-node can be used. > > Signed-off-by: Mylène Josserand <mylene.josserand@xxxxxxxxxxxxxxxxxx> > Message-Id: <20170529144538.29187-3-mylene.josserand@xxxxxxxxxxxxxxxxxx> > Signed-off-by: Alistair Francis <alistair@xxxxxxxxxxxxx> > --- > .../input/touchscreen/cypress,tt21000.yaml | 92 +++++++++++++++++++ > 1 file changed, 92 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dts:37.26-39.19: Warning (unit_address_vs_reg): /example-0/i2c/touchscreen@24/button@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dts:41.26-43.19: Warning (unit_address_vs_reg): /example-0/i2c/touchscreen@24/button@1: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dts:45.26-47.19: Warning (unit_address_vs_reg): /example-0/i2c/touchscreen@24/button@2: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dt.yaml:0:0: /example-0/i2c/touchscreen@24: failed to match any schema with compatible: ['cypress,tt2100'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1562669 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
