Re: [PATCH v2] Input: i8042 - Add deferred probe support

[Samuel Čavoj <samuel@xxxxxxxxx>]

Hi Takashi,

On 2021-11-17 07:37, Takashi Iwai wrote:
> [...]
> The deferred probe mode is enabled either via the new option
> i8042.probe_defer or via the quirk table entry.  As of this patch, the
> quirk table contains only ASUS ZenBook UX425UA.

I own the ASUS ZenBook UX325UA and it has the exact same problem.
Would you add it to the quirk table, or should I just submit another
patch based on this one?

The output of `dmidecode` is as follows:

    Handle 0x0001, DMI type 1, 27 bytes
    System Information
            Manufacturer: ASUSTeK COMPUTER INC.
            Product Name: ZenBook UX325UA_UM325UA

Thank you for tracking down this problem.

> The deferred probe part is based on Fabio's initial work.
>
> BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1190256
> Link: https://lore.kernel.org/r/s5ho890n1rh.wl-tiwai@xxxxxxx
> Cc: Fabio Estevam <festevam@xxxxxxxxx>
> Signed-off-by: Takashi Iwai <tiwai@xxxxxxx>

Tested-by: Samuel Čavoj <samuel@xxxxxxxxx>

Regards,
Samuel

> ---
>
> v1->v2: Fix a typo in MODULE_PARM_DESC()
>
>  .../admin-guide/kernel-parameters.txt         |  2 +
>  drivers/input/serio/i8042-x86ia64io.h         | 14 +++++
>  drivers/input/serio/i8042.c                   | 54 ++++++++++++-------
>  3 files changed, 51 insertions(+), 19 deletions(-)
>
> diff --git a/Documentation/admin-guide/kernel-parameters.txt
> b/Documentation/admin-guide/kernel-parameters.txt
> index 9725c546a0d4..7f09fbd73245 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -1689,6 +1689,8 @@
>  			architectures force reset to be always executed
>  	i8042.unlock	[HW] Unlock (ignore) the keylock
>  	i8042.kbdreset	[HW] Reset device connected to KBD port
> +	i8042.probe_defer
> +			[HW] Allow deferred probing upon i8042 probe errors
>
>  	i810=		[HW,DRM]
>
> diff --git a/drivers/input/serio/i8042-x86ia64io.h
> b/drivers/input/serio/i8042-x86ia64io.h
> index aedd05541044..1acc7c844929 100644
> --- a/drivers/input/serio/i8042-x86ia64io.h
> +++ b/drivers/input/serio/i8042-x86ia64io.h
> @@ -995,6 +995,17 @@ static const struct dmi_system_id __initconst
> i8042_dmi_kbdreset_table[] = {
>  	{ }
>  };
>
> +static const struct dmi_system_id i8042_dmi_probe_defer_table[] 
> __initconst = {
> +	{
> +		/* ASUS ZenBook UX425UA */
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX425UA"),
> +		},
> +	},
> +	{ }
> +};
> +
>  #endif /* CONFIG_X86 */
>
>  #ifdef CONFIG_PNP
> @@ -1315,6 +1326,9 @@ static int __init i8042_platform_init(void)
>  	if (dmi_check_system(i8042_dmi_kbdreset_table))
>  		i8042_kbdreset = true;
>
> +	if (dmi_check_system(i8042_dmi_probe_defer_table))
> +		i8042_probe_defer = true;
> +
>  	/*
>  	 * A20 was already enabled during early kernel init. But some buggy
>  	 * BIOSes (in MSI Laptops) require A20 to be enabled using 8042 to
> diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
> index 0b9f1d0a8f8b..3fc0a89cc785 100644
> --- a/drivers/input/serio/i8042.c
> +++ b/drivers/input/serio/i8042.c
> @@ -45,6 +45,10 @@ static bool i8042_unlock;
>  module_param_named(unlock, i8042_unlock, bool, 0);
>  MODULE_PARM_DESC(unlock, "Ignore keyboard lock.");
>
> +static bool i8042_probe_defer;
> +module_param_named(probe_defer, i8042_probe_defer, bool, 0);
> +MODULE_PARM_DESC(probe_defer, "Allow deferred probing.");
> +
>  enum i8042_controller_reset_mode {
>  	I8042_RESET_NEVER,
>  	I8042_RESET_ALWAYS,
> @@ -711,7 +715,7 @@ static int i8042_set_mux_mode(bool multiplex,
> unsigned char *mux_version)
>   * LCS/Telegraphics.
>   */
>
> -static int __init i8042_check_mux(void)
> +static int i8042_check_mux(void)
>  {
>  	unsigned char mux_version;
>
> @@ -740,10 +744,10 @@ static int __init i8042_check_mux(void)
>  /*
>   * The following is used to test AUX IRQ delivery.
>   */
> -static struct completion i8042_aux_irq_delivered __initdata;
> -static bool i8042_irq_being_tested __initdata;
> +static struct completion i8042_aux_irq_delivered;
> +static bool i8042_irq_being_tested;
>
> -static irqreturn_t __init i8042_aux_test_irq(int irq, void *dev_id)
> +static irqreturn_t i8042_aux_test_irq(int irq, void *dev_id)
>  {
>  	unsigned long flags;
>  	unsigned char str, data;
> @@ -770,7 +774,7 @@ static irqreturn_t __init i8042_aux_test_irq(int
> irq, void *dev_id)
>   * verifies success by readinng CTR. Used when testing for presence of 
> AUX
>   * port.
>   */
> -static int __init i8042_toggle_aux(bool on)
> +static int i8042_toggle_aux(bool on)
>  {
>  	unsigned char param;
>  	int i;
> @@ -798,7 +802,7 @@ static int __init i8042_toggle_aux(bool on)
>   * the presence of an AUX interface.
>   */
>
> -static int __init i8042_check_aux(void)
> +static int i8042_check_aux(void)
>  {
>  	int retval = -1;
>  	bool irq_registered = false;
> @@ -1005,7 +1009,7 @@ static int i8042_controller_init(void)
>
>  		if (i8042_command(&ctr[n++ % 2], I8042_CMD_CTL_RCTR)) {
>  			pr_err("Can't read CTR while initializing i8042\n");
> -			return -EIO;
> +			return i8042_probe_defer ? -EPROBE_DEFER : -EIO;
>  		}
>
>  	} while (n < 2 || ctr[0] != ctr[1]);
> @@ -1320,7 +1324,7 @@ static void i8042_shutdown(struct platform_device 
> *dev)
>  	i8042_controller_reset(false);
>  }
>
> -static int __init i8042_create_kbd_port(void)
> +static int i8042_create_kbd_port(void)
>  {
>  	struct serio *serio;
>  	struct i8042_port *port = &i8042_ports[I8042_KBD_PORT_NO];
> @@ -1349,7 +1353,7 @@ static int __init i8042_create_kbd_port(void)
>  	return 0;
>  }
>
> -static int __init i8042_create_aux_port(int idx)
> +static int i8042_create_aux_port(int idx)
>  {
>  	struct serio *serio;
>  	int port_no = idx < 0 ? I8042_AUX_PORT_NO : I8042_MUX_PORT_NO + idx;
> @@ -1386,13 +1390,13 @@ static int __init i8042_create_aux_port(int 
> idx)
>  	return 0;
>  }
>
> -static void __init i8042_free_kbd_port(void)
> +static void i8042_free_kbd_port(void)
>  {
>  	kfree(i8042_ports[I8042_KBD_PORT_NO].serio);
>  	i8042_ports[I8042_KBD_PORT_NO].serio = NULL;
>  }
>
> -static void __init i8042_free_aux_ports(void)
> +static void i8042_free_aux_ports(void)
>  {
>  	int i;
>
> @@ -1402,7 +1406,7 @@ static void __init i8042_free_aux_ports(void)
>  	}
>  }
>
> -static void __init i8042_register_ports(void)
> +static void i8042_register_ports(void)
>  {
>  	int i;
>
> @@ -1443,7 +1447,7 @@ static void i8042_free_irqs(void)
>  	i8042_aux_irq_registered = i8042_kbd_irq_registered = false;
>  }
>
> -static int __init i8042_setup_aux(void)
> +static int i8042_setup_aux(void)
>  {
>  	int (*aux_enable)(void);
>  	int error;
> @@ -1485,7 +1489,7 @@ static int __init i8042_setup_aux(void)
>  	return error;
>  }
>
> -static int __init i8042_setup_kbd(void)
> +static int i8042_setup_kbd(void)
>  {
>  	int error;
>
> @@ -1535,7 +1539,7 @@ static int i8042_kbd_bind_notifier(struct
> notifier_block *nb,
>  	return 0;
>  }
>
> -static int __init i8042_probe(struct platform_device *dev)
> +static int i8042_probe(struct platform_device *dev)
>  {
>  	int error;
>
> @@ -1600,6 +1604,7 @@ static struct platform_driver i8042_driver = {
>  		.pm	= &i8042_pm_ops,
>  #endif
>  	},
> +	.probe		= i8042_probe,
>  	.remove		= i8042_remove,
>  	.shutdown	= i8042_shutdown,
>  };
> @@ -1610,7 +1615,6 @@ static struct notifier_block
> i8042_kbd_bind_notifier_block = {
>
>  static int __init i8042_init(void)
>  {
> -	struct platform_device *pdev;
>  	int err;
>
>  	dbg_init();
> @@ -1626,17 +1630,29 @@ static int __init i8042_init(void)
>  	/* Set this before creating the dev to allow i8042_command to work
> right away */
>  	i8042_present = true;
>
> -	pdev = platform_create_bundle(&i8042_driver, i8042_probe, NULL, 0, 
> NULL, 0);
> -	if (IS_ERR(pdev)) {
> -		err = PTR_ERR(pdev);
> +	err = platform_driver_register(&i8042_driver);
> +	if (err)
>  		goto err_platform_exit;
> +
> +	i8042_platform_device = platform_device_alloc("i8042", -1);
> +	if (!i8042_platform_device) {
> +		err = -ENOMEM;
> +		goto err_unregister_driver;
>  	}
>
> +	err = platform_device_add(i8042_platform_device);
> +	if (err)
> +		goto err_free_device;
> +
>  	bus_register_notifier(&serio_bus, &i8042_kbd_bind_notifier_block);
>  	panic_blink = i8042_panic_blink;
>
>  	return 0;
>
> +err_free_device:
> +	platform_device_put(i8042_platform_device);
> +err_unregister_driver:
> +	platform_driver_unregister(&i8042_driver);
>   err_platform_exit:
>  	i8042_platform_exit();
>  	return err;