Hi Tero, [just a quick note, I am supposed to be on holiday this week] On Thu, Nov 4, 2021 at 2:38 PM Tero Kristo <tero.kristo@xxxxxxxxxxxxxxx> wrote: > > Hi, > > This series is an RFC for USI (Universal Stylus Interface) style pen > support. This is based on documentation from USB org describing the HID > usage tables for digitizers (page 0x0D) and experimentation with actual > USI capable controllers. > > This series introduces the USI support with a new HID driver, which > applies the controller specific quirks. The most problematic part of the > USI support is handling of the pen parameters (color, line width, line > style), which are not immediately available from the controller from pen > down event, but must be cached and queried separately from the controller. > In addition to that, when a get-feature report is sent to the > controller, there is a delay before the proper value is reported out; it > is not part of the feature report coming back immediately. > Most of the code in the driver is to handle this (otherwise we could > just use hid-generic.) > > This also boils down to the reason why this series is an RFC, I would like > to receive some feedback which option to pick for programming of the new > values for the programmable pen parameters; whether to parse the input > events so userspace can directly write the new values to the input event > file handle, or whether to use IOCTL. Patches #7 / #8 are sort of optional > choices towards this, but are there to show that both approaches can be > done. Direct write to evdev causes some confusion on the driver level > though, thus patch #7 is there to avoid some of that introducing new > input events for writing the parameters. IOCTL might be the cleanest > approach and I am slightly leaning towards that myself (see patch #8, > this would need to be squashed and cleaned up a bit though but would > effectively get rid of some code from patch #6 and completely rid patch #7.) This series unfortunately raised quite a few red flags for me, and I am glad this is just an RFC. Let me enumerate them first and discuss a little bit more about those: 1. USI is supposed to be generic, so why is there a new driver for it instead of being handled by hid-input.c? 2. new MSC_EVENTS are created without Dmitry or Peter being CC-ed 3. new ioctls??? 4. direct write to evdev to write parameters 5. patch 1/8 doesn't compile without 5/8 6. no tests :) 1. new driver After quickly reading the RFC, I think the main issue there is that we are now having a transducer index which is incompatible with the way input and evedev works nowadays. Yay, we have a new hid-multitouch for pen :( Wacom has been dealing with that situation for years by tweaking the protocol and by just emitting a different serial number (roughly). I think the safest approach would be to keep the existing protocol running so that our user space can handle it properly. I'd need to read the rest of the code more carefully, but if we could have a basic generic handling (without the fancy features like changing the pen style/color) I'd be happier. 2. MSC_* events there is an issue with those: they are not cached like the ABS_* ones. Meaning that each report will wake up userspace for something which basically doesn't change. I know ABS_* is saturated, but I'd like to have reviews from others on what could be done here instead of just using MSC_* as a new ABS_* 3. ioctls this is problematic to me. Any new kernel ABI is problematic to me, and I'd much rather not add any new ones. My new set of mind is because of the recent work I have been conducting regarding eBPF. Basically I managed to have eBPF programs handling the device configuration and event processing in a local branch. I should be able to push a WIP next week, but basically this should allow me to not have to deal with new kernel APIs besides the generic eBPF one. We can imagine a generic hid-input.c processing for those tablets, and have a new userspace component that loads an eBPF program with its own userspace API which is capable of the fancy features. For instance, my current playground is setting the haptic feedback of the Surface Dial depending on the resolution I set on it. Furthermore, ioctls on a new cdev means that the classic userspace libraries will not have access to it without some heavy tuning in the systemd space (libinput only has read/write access to /dev/input/event*). 4. direct write to evdev We enabled that once for LEDs, and it's a pain to maintain. Maybe we can make a use case for it but given that you don't seem very enthusiastic about it too, I wonder if this is not a dead end. 5. patch ordering doesn't compile I guess this is just a rebase hiccup. Not an issue for an RFC 6. tests For these kinds of new classes of devices, I'd like to have tests in the https://gitlab.freedesktop.org/libevdev/hid-tools repository. There is already an initial MR for tablet support (!115 in this project), and we should extend it with more tests. I'd happily help with those tests if you could share the report descriptors and some device dumps made with the hid-recorder tool from that repository. > > The driver has been tested with chromebooks that contain either Goodix > or Elan manufactured USI capable touchscreen controllers in them. > > Any feedback appreciated! I'll try to have a deeper look next week (though it seems a few bits stacked up during my week off, sigh). Cheers, Benjamin > > -Tero > >
