On Wed, Sep 29, 2021 at 5:26 PM John Keeping <john@xxxxxxxxxxxx> wrote:
> I have a ST1633 touch controller which fails to probe due to a timeout
> waiting for the controller to become ready. Increasing the minimum
> delay to 100ms ensures that the probe sequence completes successfully.
>
> The ST1633 datasheet says nothing about the maximum delay here and the
> ST1232 I2C protocol document says "wait until" with no notion of a
> timeout.
>
> Since this only runs once during probe, being generous with the timout
> seems reasonable and most likely the device will become ready
> eventually.
>
> (It may be worth noting that I saw this issue with a PREEMPT_RT patched
> kernel which probably has tighter wakeups from usleep_range() than other
> preemption models.)
>
> Fixes: f605be6a57b4 ("Input: st1232 - wait until device is ready before reading resolution")
> Signed-off-by: John Keeping <john@xxxxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
