Refactor reset handling a bit, change the main reset handler into a new goodix_reset_no_int_sync() helper and add a goodix_reset() wrapper which calls goodix_int_sync() separately. Also push the dev_err() call on reset failure into the goodix_reset_no_int_sync() and goodix_int_sync() functions, so that we don't need to have separate dev_err() calls in all their callers. This is a preparation patch for adding support for controllers without flash, which need to have their firmware uploaded and need some other special handling too. Reviewed-by: Bastien Nocera <hadess@xxxxxxxxxx> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- drivers/input/touchscreen/goodix.c | 46 +++++++++++++++++++----------- drivers/input/touchscreen/goodix.h | 1 + 2 files changed, 31 insertions(+), 16 deletions(-) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index ecd2e4dcaf53..7ab4a19fb2bf 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -595,56 +595,74 @@ int goodix_int_sync(struct goodix_ts_data *ts) error = goodix_irq_direction_output(ts, 0); if (error) - return error; + goto error; msleep(50); /* T5: 50ms */ error = goodix_irq_direction_input(ts); if (error) - return error; + goto error; return 0; +error: + dev_err(&ts->client->dev, "Controller irq sync failed.\n"); + return error; } /** - * goodix_reset - Reset device during power on + * goodix_reset_no_int_sync - Reset device, leaving interrupt line in output mode * * @ts: goodix_ts_data pointer */ -static int goodix_reset(struct goodix_ts_data *ts) +int goodix_reset_no_int_sync(struct goodix_ts_data *ts) { int error; /* begin select I2C slave addr */ error = gpiod_direction_output(ts->gpiod_rst, 0); if (error) - return error; + goto error; msleep(20); /* T2: > 10ms */ /* HIGH: 0x28/0x29, LOW: 0xBA/0xBB */ error = goodix_irq_direction_output(ts, ts->client->addr == 0x14); if (error) - return error; + goto error; usleep_range(100, 2000); /* T3: > 100us */ error = gpiod_direction_output(ts->gpiod_rst, 1); if (error) - return error; + goto error; usleep_range(6000, 10000); /* T4: > 5ms */ /* end select I2C slave addr */ error = gpiod_direction_input(ts->gpiod_rst); if (error) - return error; + goto error; - error = goodix_int_sync(ts); + return 0; +error: + dev_err(&ts->client->dev, "Controller reset failed.\n"); + return error; +} + +/** + * goodix_reset - Reset device during power on + * + * @ts: goodix_ts_data pointer + */ +static int goodix_reset(struct goodix_ts_data *ts) +{ + int error; + + error = goodix_reset_no_int_sync(ts); if (error) return error; - return 0; + return goodix_int_sync(ts); } #ifdef ACPI_GPIO_SUPPORT @@ -1143,10 +1161,8 @@ static int goodix_ts_probe(struct i2c_client *client, if (ts->reset_controller_at_probe) { /* reset the controller */ error = goodix_reset(ts); - if (error) { - dev_err(&client->dev, "Controller reset failed.\n"); + if (error) return error; - } } error = goodix_i2c_test(client); @@ -1288,10 +1304,8 @@ static int __maybe_unused goodix_resume(struct device *dev) if (error != 0 || config_ver != ts->config[0]) { error = goodix_reset(ts); - if (error) { - dev_err(dev, "Controller reset failed.\n"); + if (error) return error; - } error = goodix_send_cfg(ts, ts->config, ts->chip->config_len); if (error) diff --git a/drivers/input/touchscreen/goodix.h b/drivers/input/touchscreen/goodix.h index cdaced4f2980..0b88554ba2ae 100644 --- a/drivers/input/touchscreen/goodix.h +++ b/drivers/input/touchscreen/goodix.h @@ -69,5 +69,6 @@ int goodix_i2c_write(struct i2c_client *client, u16 reg, const u8 *buf, int len) int goodix_i2c_write_u8(struct i2c_client *client, u16 reg, u8 value); int goodix_send_cfg(struct goodix_ts_data *ts, const u8 *cfg, int len); int goodix_int_sync(struct goodix_ts_data *ts); +int goodix_reset_no_int_sync(struct goodix_ts_data *ts); #endif -- 2.31.1