Re: [PATCH 20/40] mfd: ti_am335x_tscadc: Gather the ctrl register logic at one place

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 25 Aug 2021 17:24:58 +0200
Miquel Raynal <miquel.raynal@xxxxxxxxxxx> wrote:

> Instead of deriving in the probe and in the resume path the value of the
> ctrl register, let's do it only once in the probe, save the value of
> this register in the driver's structure and use it from the resume
> callback.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
A few minor things inline.

J

> ---
>  drivers/mfd/ti_am335x_tscadc.c       | 31 ++++++++--------------------
>  include/linux/mfd/ti_am335x_tscadc.h |  2 +-
>  2 files changed, 10 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
> index 7071344ad18e..d661e8ae66c9 100644
> --- a/drivers/mfd/ti_am335x_tscadc.c
> +++ b/drivers/mfd/ti_am335x_tscadc.c
> @@ -122,7 +122,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
>  	struct clk *clk;
>  	u32 val;
>  	int tsc_wires = 0, adc_channels = 0, readouts = 0, cell_idx = 0;
> -	int total_channels, ctrl, err;
> +	int total_channels, err;
>  
>  	/* Allocate memory for device */
>  	tscadc = devm_kzalloc(&pdev->dev, sizeof(*tscadc), GFP_KERNEL);
> @@ -215,22 +215,21 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
>  	regmap_write(tscadc->regmap, REG_CLKDIV, tscadc->clk_div);
>  
>  	/* Set the control register bits */
> -	ctrl = CNTRLREG_STEPCONFIGWRT |	CNTRLREG_STEPID;
> -	regmap_write(tscadc->regmap, REG_CTRL, ctrl);
> +	tscadc->ctrl = CNTRLREG_STEPCONFIGWRT | CNTRLREG_STEPID;
> +	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);
>  
>  	if (tsc_wires > 0) {
> -		tscadc->tsc_wires = tsc_wires;
> +		tscadc->ctrl |= CNTRLREG_TSCENB;
>  		if (tsc_wires == 5)
> -			ctrl |= CNTRLREG_5WIRE | CNTRLREG_TSCENB;
> +			tscadc->ctrl |= CNTRLREG_5WIRE;
>  		else
> -			ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB;
> +			tscadc->ctrl |= CNTRLREG_4WIRE;
>  	}
>  
>  	tscadc_idle_config(tscadc);
>  
>  	/* Enable the TSC module enable bit */
> -	ctrl |= CNTRLREG_TSCSSENB;
> -	regmap_write(tscadc->regmap, REG_CTRL, ctrl);
> +	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl | CNTRLREG_TSCSSENB);
>  
>  	/* TSC Cell */
>  	if (tsc_wires > 0) {
> @@ -305,25 +304,13 @@ static int __maybe_unused tscadc_suspend(struct device *dev)
>  static int __maybe_unused tscadc_resume(struct device *dev)
>  {
>  	struct ti_tscadc_dev *tscadc = dev_get_drvdata(dev);
> -	u32 ctrl;
>  
>  	pm_runtime_get_sync(dev);
>  
> -	/* context restore */
> -	ctrl = CNTRLREG_STEPCONFIGWRT |	CNTRLREG_STEPID;
> -	regmap_write(tscadc->regmap, REG_CTRL, ctrl);
> -
> -	if (tscadc->tsc_wires > 0) {
> -		if (tscadc->tsc_wires == 5)
> -			ctrl |= CNTRLREG_5WIRE | CNTRLREG_TSCENB;
> -		else
> -			ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB;
> -	}
> -	ctrl |= CNTRLREG_TSCSSENB;
> -	regmap_write(tscadc->regmap, REG_CTRL, ctrl);
> -
>  	regmap_write(tscadc->regmap, REG_CLKDIV, tscadc->clk_div);
> +	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);

Patch description should mention why this ordering change is here.

>  	tscadc_idle_config(tscadc);
> +	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl | CNTRLREG_TSCSSENB);

As the value of tscadc->ctrl is not the same as REG_CTRL this is a bit non obvious.

You might be better off keeping them in sync, but masking that bit out and then resetting
it as appropriate.

>  
>  	return 0;
>  }
> diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
> index e734fb97dff8..02963b6ebbac 100644
> --- a/include/linux/mfd/ti_am335x_tscadc.h
> +++ b/include/linux/mfd/ti_am335x_tscadc.h
> @@ -177,8 +177,8 @@ struct ti_tscadc_dev {
>  	phys_addr_t tscadc_phys_base;
>  	const struct ti_tscadc_data *data;
>  	int irq;
> -	int tsc_wires;
>  	struct mfd_cell cells[TSCADC_CELLS];
> +	u32 ctrl;
>  	u32 reg_se_cache;
>  	bool adc_waiting;
>  	bool adc_in_use;




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux