This patch adds power_supply functionality to the switch controller driver for its battery. Signed-off-by: Daniel J. Ogorchock <djogorchock@xxxxxxxxx> --- drivers/hid/Kconfig | 1 + drivers/hid/hid-nintendo.c | 134 +++++++++++++++++++++++++++++++++++++ 2 files changed, 135 insertions(+) diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 142656b030b3e..f91e299e480b7 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -735,6 +735,7 @@ config HID_NINTENDO depends on HID depends on NEW_LEDS depends on LEDS_CLASS + select POWER_SUPPLY help Adds support for the Nintendo Switch Joy-Cons and Pro Controller. All controllers support bluetooth, and the Pro Controller also supports diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c index e8f9fb8c3c11b..aea64ea8eb092 100644 --- a/drivers/hid/hid-nintendo.c +++ b/drivers/hid/hid-nintendo.c @@ -11,6 +11,7 @@ * https://github.com/MTCKC/ProconXInput * hid-wiimote kernel hid driver * hid-logitech-hidpp driver + * hid-sony driver * * This driver supports the Nintendo Switch Joy-Cons and Pro Controllers. The * Pro Controllers can either be used over USB or Bluetooth. @@ -27,6 +28,7 @@ #include <linux/input.h> #include <linux/leds.h> #include <linux/module.h> +#include <linux/power_supply.h> #include <linux/spinlock.h> /* @@ -199,6 +201,7 @@ struct joycon_ctlr { struct input_dev *input; struct led_classdev leds[JC_NUM_LEDS]; enum joycon_ctlr_state ctlr_state; + spinlock_t lock; /* The following members are used for synchronous sends/receives */ enum joycon_msg_type msg_type; @@ -216,6 +219,12 @@ struct joycon_ctlr { struct joycon_stick_cal right_stick_cal_x; struct joycon_stick_cal right_stick_cal_y; + /* power supply data */ + struct power_supply *battery; + struct power_supply_desc battery_desc; + u8 battery_capacity; + bool battery_charging; + bool host_powered; }; static int __joycon_hid_send(struct hid_device *hdev, u8 *data, size_t len) @@ -446,9 +455,41 @@ static void joycon_parse_report(struct joycon_ctlr *ctlr, struct joycon_input_report *rep) { struct input_dev *dev = ctlr->input; + unsigned long flags; + u8 tmp; u32 btns; u32 id = ctlr->hdev->product; + /* Parse the battery status */ + tmp = rep->bat_con; + spin_lock_irqsave(&ctlr->lock, flags); + ctlr->host_powered = tmp & BIT(0); + ctlr->battery_charging = tmp & BIT(4); + tmp = tmp >> 5; + switch (tmp) { + case 0: /* empty */ + ctlr->battery_capacity = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; + break; + case 1: /* low */ + ctlr->battery_capacity = POWER_SUPPLY_CAPACITY_LEVEL_LOW; + break; + case 2: /* medium */ + ctlr->battery_capacity = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; + break; + case 3: /* high */ + ctlr->battery_capacity = POWER_SUPPLY_CAPACITY_LEVEL_HIGH; + break; + case 4: /* full */ + ctlr->battery_capacity = POWER_SUPPLY_CAPACITY_LEVEL_FULL; + break; + default: + ctlr->battery_capacity = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN; + hid_warn(ctlr->hdev, "Invalid battery status\n"); + break; + } + spin_unlock_irqrestore(&ctlr->lock, flags); + + /* Parse the buttons and sticks */ btns = hid_field_extract(ctlr->hdev, rep->button_status, 0, 24); if (id != USB_DEVICE_ID_NINTENDO_JOYCONR) { @@ -743,6 +784,91 @@ static int joycon_player_leds_create(struct joycon_ctlr *ctlr) return 0; } +static int joycon_battery_get_property(struct power_supply *supply, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct joycon_ctlr *ctlr = power_supply_get_drvdata(supply); + unsigned long flags; + int ret = 0; + u8 capacity; + bool charging; + bool powered; + + spin_lock_irqsave(&ctlr->lock, flags); + capacity = ctlr->battery_capacity; + charging = ctlr->battery_charging; + powered = ctlr->host_powered; + spin_unlock_irqrestore(&ctlr->lock, flags); + + switch (prop) { + case POWER_SUPPLY_PROP_PRESENT: + val->intval = 1; + break; + case POWER_SUPPLY_PROP_SCOPE: + val->intval = POWER_SUPPLY_SCOPE_DEVICE; + break; + case POWER_SUPPLY_PROP_CAPACITY_LEVEL: + val->intval = capacity; + break; + case POWER_SUPPLY_PROP_STATUS: + if (charging) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else if (capacity == POWER_SUPPLY_CAPACITY_LEVEL_FULL && + powered) + val->intval = POWER_SUPPLY_STATUS_FULL; + else + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static enum power_supply_property joycon_battery_props[] = { + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, + POWER_SUPPLY_PROP_SCOPE, + POWER_SUPPLY_PROP_STATUS, +}; + +static int joycon_power_supply_create(struct joycon_ctlr *ctlr) +{ + struct hid_device *hdev = ctlr->hdev; + struct power_supply_config supply_config = { .drv_data = ctlr, }; + const char * const name_fmt = "nintendo_switch_controller_battery_%s"; + int ret = 0; + + /* Set initially to unknown before receiving first input report */ + ctlr->battery_capacity = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN; + + /* Configure the battery's description */ + ctlr->battery_desc.properties = joycon_battery_props; + ctlr->battery_desc.num_properties = + ARRAY_SIZE(joycon_battery_props); + ctlr->battery_desc.get_property = joycon_battery_get_property; + ctlr->battery_desc.type = POWER_SUPPLY_TYPE_BATTERY; + ctlr->battery_desc.use_for_apm = 0; + ctlr->battery_desc.name = devm_kasprintf(&hdev->dev, GFP_KERNEL, + name_fmt, + dev_name(&hdev->dev)); + if (!ctlr->battery_desc.name) + return -ENOMEM; + + ctlr->battery = devm_power_supply_register(&hdev->dev, + &ctlr->battery_desc, + &supply_config); + if (IS_ERR(ctlr->battery)) { + ret = PTR_ERR(ctlr->battery); + hid_err(hdev, "Failed to register battery; ret=%d\n", ret); + return ret; + } + + return power_supply_powers(ctlr->battery, &hdev->dev); +} + /* Common handler for parsing inputs */ static int joycon_ctlr_read_handler(struct joycon_ctlr *ctlr, u8 *data, int size) @@ -834,6 +960,7 @@ static int nintendo_hid_probe(struct hid_device *hdev, hid_set_drvdata(hdev, ctlr); mutex_init(&ctlr->output_mutex); init_waitqueue_head(&ctlr->wait); + spin_lock_init(&ctlr->lock); ret = hid_parse(hdev); if (ret) { @@ -906,6 +1033,13 @@ static int nintendo_hid_probe(struct hid_device *hdev, goto err_close; } + /* Initialize the battery power supply */ + ret = joycon_power_supply_create(ctlr); + if (ret) { + hid_err(hdev, "Failed to create power_supply; ret=%d\n", ret); + goto err_close; + } + ret = joycon_input_create(ctlr); if (ret) { hid_err(hdev, "Failed to create input device; ret=%d\n", ret); -- 2.32.0
