Since commit 37548659bb22 ("Input: elantech - query the min/max information beforehand too")
moved the querying of the x_max/y_max values from
elantech_set_input_params to elantech_query_info,
the returned x_max/y_max values are different than before,
at least for some firmware versions.
The reason is likely that this is now done before
elantech_set_absolute_mode does run. So it may happen that
the returned values are exactly half of what they used to be,
which makes input_report_abs in PS/2 mode report ABS_X values which
exceed the x_max value, which is very annoying since the mouse stops
to move then, and ABS_Y value become negative, which is benign.
This was observed with a MSI GX70 laptop:
elantech: assuming hardware version 3 (with firmware version 0x250f01)
elantech: Synaptics capabilities query result 0x18, 0x17, 0x0b.
elantech: Elan sample query result 05, 0e, 00
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio...
This patch moves the code sending the ETP_FW_ID_QUERY command to
the function elantech_set_range and calls this function in
elantech_query_info for hw_version == 4, but for hw_version < 4 it is
called in elantech_setup_ps2 after the function elantech_set_absolute_mode.
It is right to switch the touchpad into absolute mode first to get valid
results from the ID query call in hardware version 2 and 3.
There is no way how this change can affect the state of the firmware
when elantech_setup_smbus is called later, since that can only happen for
hardware version 4, see elantech_init_smbusand elantech_use_host_notify
which uses ETP_NEW_IC_SMBUS_HOST_NOTIFY and info->bus.
The macro ETP_NEW_IC_SMBUS_HOST_NOTIFY can only return true
for (fw_version & 0x0f0000) == 0x0f0000 which implies v4 hardware.
The value info->bus can only be unequal to ETP_BUS_PS2_ONLY,
if elantech_get_resolution_v4 was called from elantech_query_info,
which is again guarded by info->hw_version == 4.
Fixes: 37548659bb22 ("Input: elantech - query the min/max information beforehand too")
Signed-off-by: Bernd Edlinger <bernd.edlinger@xxxxxxxxxx>
---
v3: Do the ID_QUEERY after set absoulute mode for hw_version < 4.
Note: It turned out to be more difficult to call elantech_set_absolute_mode
from elantech_query_info.
drivers/input/mouse/elantech.c | 172 ++++++++++++++++++++++-------------------
1 file changed, 94 insertions(+), 78 deletions(-)
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 97381e2..5f4a1a4 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1078,6 +1078,94 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
return rc;
}
+static int elantech_set_range(struct psmouse *psmouse,
+ struct elantech_device_info *info)
+{
+ unsigned char param[3];
+ unsigned char traces;
+
+ /* query range information */
+ switch (info->hw_version) {
+ case 1:
+ info->x_min = ETP_XMIN_V1;
+ info->y_min = ETP_YMIN_V1;
+ info->x_max = ETP_XMAX_V1;
+ info->y_max = ETP_YMAX_V1;
+ break;
+
+ case 2:
+ if (info->fw_version == 0x020800 ||
+ info->fw_version == 0x020b00 ||
+ info->fw_version == 0x020030) {
+ info->x_min = ETP_XMIN_V2;
+ info->y_min = ETP_YMIN_V2;
+ info->x_max = ETP_XMAX_V2;
+ info->y_max = ETP_YMAX_V2;
+ } else {
+ int i;
+ int fixed_dpi;
+
+ i = (info->fw_version > 0x020800 &&
+ info->fw_version < 0x020900) ? 1 : 2;
+
+ if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
+ return -EINVAL;
+
+ fixed_dpi = param[1] & 0x10;
+
+ if (((info->fw_version >> 16) == 0x14) && fixed_dpi) {
+ if (info->send_cmd(psmouse, ETP_SAMPLE_QUERY, param))
+ return -EINVAL;
+
+ info->x_max = (info->capabilities[1] - i) * param[1] / 2;
+ info->y_max = (info->capabilities[2] - i) * param[2] / 2;
+ } else if (info->fw_version == 0x040216) {
+ info->x_max = 819;
+ info->y_max = 405;
+ } else if (info->fw_version == 0x040219 || info->fw_version == 0x040215) {
+ info->x_max = 900;
+ info->y_max = 500;
+ } else {
+ info->x_max = (info->capabilities[1] - i) * 64;
+ info->y_max = (info->capabilities[2] - i) * 64;
+ }
+ }
+ break;
+
+ case 3:
+ if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
+ return -EINVAL;
+
+ info->x_max = (0x0f & param[0]) << 8 | param[1];
+ info->y_max = (0xf0 & param[0]) << 4 | param[2];
+ break;
+
+ case 4:
+ if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
+ return -EINVAL;
+
+ info->x_max = (0x0f & param[0]) << 8 | param[1];
+ info->y_max = (0xf0 & param[0]) << 4 | param[2];
+ traces = info->capabilities[1];
+ if ((traces < 2) || (traces > info->x_max))
+ return -EINVAL;
+
+ info->width = info->x_max / (traces - 1);
+
+ /* column number of traces */
+ info->x_traces = traces;
+
+ /* row number of traces */
+ traces = info->capabilities[2];
+ if ((traces >= 2) && (traces <= info->y_max))
+ info->y_traces = traces;
+
+ break;
+ }
+
+ return 0;
+}
+
/*
* (value from firmware) * 10 + 790 = dpi
* we also have to convert dpi to dots/mm (*10/254 to avoid floating point)
@@ -1659,7 +1747,6 @@ static int elantech_query_info(struct psmouse *psmouse,
struct elantech_device_info *info)
{
unsigned char param[3];
- unsigned char traces;
unsigned char ic_body[3];
memset(info, 0, sizeof(*info));
@@ -1759,85 +1846,9 @@ static int elantech_query_info(struct psmouse *psmouse,
psmouse_warn(psmouse,
"failed to query resolution data.\n");
}
- }
-
- /* query range information */
- switch (info->hw_version) {
- case 1:
- info->x_min = ETP_XMIN_V1;
- info->y_min = ETP_YMIN_V1;
- info->x_max = ETP_XMAX_V1;
- info->y_max = ETP_YMAX_V1;
- break;
-
- case 2:
- if (info->fw_version == 0x020800 ||
- info->fw_version == 0x020b00 ||
- info->fw_version == 0x020030) {
- info->x_min = ETP_XMIN_V2;
- info->y_min = ETP_YMIN_V2;
- info->x_max = ETP_XMAX_V2;
- info->y_max = ETP_YMAX_V2;
- } else {
- int i;
- int fixed_dpi;
-
- i = (info->fw_version > 0x020800 &&
- info->fw_version < 0x020900) ? 1 : 2;
-
- if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
- return -EINVAL;
- fixed_dpi = param[1] & 0x10;
-
- if (((info->fw_version >> 16) == 0x14) && fixed_dpi) {
- if (info->send_cmd(psmouse, ETP_SAMPLE_QUERY, param))
- return -EINVAL;
-
- info->x_max = (info->capabilities[1] - i) * param[1] / 2;
- info->y_max = (info->capabilities[2] - i) * param[2] / 2;
- } else if (info->fw_version == 0x040216) {
- info->x_max = 819;
- info->y_max = 405;
- } else if (info->fw_version == 0x040219 || info->fw_version == 0x040215) {
- info->x_max = 900;
- info->y_max = 500;
- } else {
- info->x_max = (info->capabilities[1] - i) * 64;
- info->y_max = (info->capabilities[2] - i) * 64;
- }
- }
- break;
-
- case 3:
- if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
- return -EINVAL;
-
- info->x_max = (0x0f & param[0]) << 8 | param[1];
- info->y_max = (0xf0 & param[0]) << 4 | param[2];
- break;
-
- case 4:
- if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
+ if (elantech_set_range(psmouse, info))
return -EINVAL;
-
- info->x_max = (0x0f & param[0]) << 8 | param[1];
- info->y_max = (0xf0 & param[0]) << 4 | param[2];
- traces = info->capabilities[1];
- if ((traces < 2) || (traces > info->x_max))
- return -EINVAL;
-
- info->width = info->x_max / (traces - 1);
-
- /* column number of traces */
- info->x_traces = traces;
-
- /* row number of traces */
- traces = info->capabilities[2];
- if ((traces >= 2) && (traces <= info->y_max))
- info->y_traces = traces;
-
- break;
}
/* check for the middle button: DMI matching or new v4 firmwares */
@@ -2037,6 +2048,11 @@ static int elantech_setup_ps2(struct psmouse *psmouse,
goto init_fail;
}
+ if (info->hw_version < 4) {
+ if (elantech_set_range(psmouse, &etd->info))
+ goto init_fail;
+ }
+
if (info->fw_version == 0x381f17) {
etd->original_set_rate = psmouse->set_rate;
psmouse->set_rate = elantech_set_rate_restore_reg_07;
--
1.9.1
