On Sun, 11 Apr 2021 at 18:21, Johnny Chuang <johnny.chuang.emc@xxxxxxxxx> wrote:
>
> Previous commit 43b7029f475e ("HID: i2c-hid:
> Send power-on command after reset"), it fixed issue for SIS touchscreen.
>
> For ELAN touchscreen, we found our boot code of IC was not flexible enough
> to receive and handle this command.
> Once the FW main code of our controller is crashed for some reason,
> the controller could not be enumerated successfully to be recognized
> by the system host. therefore, it lost touch functionality.
>
> Add quirk for skip send power-on command after reset.
> It will impact to ELAN touchscreen and touchpad on HID over I2C projects.
>
> Signed-off-by: Johnny Chuang <johnny.chuang.emc@xxxxxxxxx>
It's probably a good idea to add a Fixes: tag, like so:
Fixes: 43b7029f475e ("HID: i2c-hid: Send power-on command after reset")
Other than that,
Reviewed-by: Harry Cutts <hcutts@xxxxxxxxxxxx>
Harry Cutts
Chrome OS Touch/Input team
> ---
> Changes in v2:
> - move comment to quirk entry
> ---
> drivers/hid/i2c-hid/i2c-hid-core.c | 10 +++++++++-
> 1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
> index 9993133..957d865 100644
> --- a/drivers/hid/i2c-hid/i2c-hid-core.c
> +++ b/drivers/hid/i2c-hid/i2c-hid-core.c
> @@ -45,6 +45,7 @@
> #define I2C_HID_QUIRK_BOGUS_IRQ BIT(4)
> #define I2C_HID_QUIRK_RESET_ON_RESUME BIT(5)
> #define I2C_HID_QUIRK_BAD_INPUT_SIZE BIT(6)
> +#define I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET BIT(7)
>
>
> /* flags */
> @@ -178,6 +179,12 @@ static const struct i2c_hid_quirks {
> I2C_HID_QUIRK_RESET_ON_RESUME },
> { USB_VENDOR_ID_ITE, I2C_DEVICE_ID_ITE_LENOVO_LEGION_Y720,
> I2C_HID_QUIRK_BAD_INPUT_SIZE },
> +/*
> + * Sending the wakeup after reset actually break ELAN touchscreen controller
> + * Add I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET to skip wakeup after reset
> + */
> + { USB_VENDOR_ID_ELAN, HID_ANY_ID,
> + I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET },
> { 0, 0 }
> };
>
> @@ -461,7 +468,8 @@ static int i2c_hid_hwreset(struct i2c_client *client)
> }
>
> /* At least some SIS devices need this after reset */
> - ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
> + if (!(ihid->quirks & I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET))
> + ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
>
> out_unlock:
> mutex_unlock(&ihid->reset_lock);
> --
> 2.7.4
>
