On Fri, 02 Apr 2021 18:16:26 +0200, Giulio Benetti wrote: > This adds device tree bindings for the Hycon HY46XX touchscreen series. > > Signed-off-by: Giulio Benetti <giulio.benetti@xxxxxxxxxxxxxxxxxxxxxx> > --- > V1->V2: > As suggested by Rob Herring: > * fixed $id: address > * added "hycon," in front of every custom property > * changed all possible property to boolean type > * removed proximity-sensor-switch property since it's not handled in driver > V2->V3: > As suggested by Jonathan Neuschäfer: > * fixed some typo > * fixed description indentation > * improved boolean properties descriptions > * improved hycon,report-speed description > --- > .../input/touchscreen/hycon,hy46xx.yaml | 120 ++++++++++++++++++ > MAINTAINERS | 6 + > 2 files changed, 126 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.example.dt.yaml:0:0: /example-0/i2c/hycon-hy4633@1c: failed to match any schema with compatible: ['hycon,hy4633'] See https://patchwork.ozlabs.org/patch/1461797 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
