On Mon, Mar 22, 2021 at 09:10:05PM -0500, Jeff LaBundy wrote: > The device's hardware reset pin is only required if the platform > must be able to update the device's firmware. > > As such, demote the reset GPIO to optional in support of devices > that ship with pre-programmed firmware and don't route the reset > pin back to the SoC. > > In that case, the 'fw_file' attribute is hidden because there is > no way to open the bootloader. The logic is extended to the case > in which the device does not advertise bootloader support in the > first place. > > Last but not least, remove the hardware reset performed at probe > because there is no reason to reset the device manually. A power > on reset function already ensures a clean reset at start-up. > > Signed-off-by: Jeff LaBundy <jeff@xxxxxxxxxxx> Applied, thank you. -- Dmitry
