This patch converts the legacy text-based binding document to YAML format. Extraneous details and touchscreen properties that weren't actually supported have been dropped. The reset GPIO has since been made optional in the driver; this is now reflected here as well. Signed-off-by: Jeff LaBundy <jeff@xxxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> --- Changes in v3: - None Changes in v2: - Added vendor prefix to filename and $id - Added Reviewed-by trailer .../input/touchscreen/azoteq,iqs5xx.yaml | 75 +++++++++++++++++ .../bindings/input/touchscreen/iqs5xx.txt | 80 ------------------- 2 files changed, 75 insertions(+), 80 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/iqs5xx.txt diff --git a/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml b/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml new file mode 100644 index 000000000000..b5f377215c09 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/azoteq,iqs5xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Azoteq IQS550/572/525 Trackpad/Touchscreen Controller + +maintainers: + - Jeff LaBundy <jeff@xxxxxxxxxxx> + +description: | + The Azoteq IQS550, IQS572 and IQS525 trackpad and touchscreen controllers + employ projected-capacitance sensing and can track up to five independent + contacts. + + Link to datasheet: https://www.azoteq.com/ + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - azoteq,iqs550 + - azoteq,iqs572 + - azoteq,iqs525 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + wakeup-source: true + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@74 { + compatible = "azoteq,iqs550"; + reg = <0x74>; + interrupt-parent = <&gpio>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + reset-gpios = <&gpio 22 (GPIO_ACTIVE_LOW | + GPIO_PUSH_PULL)>; + + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/iqs5xx.txt b/Documentation/devicetree/bindings/input/touchscreen/iqs5xx.txt deleted file mode 100644 index efa0820e2469..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/iqs5xx.txt +++ /dev/null @@ -1,80 +0,0 @@ -Azoteq IQS550/572/525 Trackpad/Touchscreen Controller - -Required properties: - -- compatible : Must be equal to one of the following: - "azoteq,iqs550" - "azoteq,iqs572" - "azoteq,iqs525" - -- reg : I2C slave address for the device. - -- interrupts : GPIO to which the device's active-high RDY - output is connected (see [0]). - -- reset-gpios : GPIO to which the device's active-low NRST - input is connected (see [1]). - -Optional properties: - -- touchscreen-min-x : See [2]. - -- touchscreen-min-y : See [2]. - -- touchscreen-size-x : See [2]. If this property is omitted, the - maximum x-coordinate is specified by the - device's "X Resolution" register. - -- touchscreen-size-y : See [2]. If this property is omitted, the - maximum y-coordinate is specified by the - device's "Y Resolution" register. - -- touchscreen-max-pressure : See [2]. Pressure is expressed as the sum of - the deltas across all channels impacted by a - touch event. A channel's delta is calculated - as its count value minus a reference, where - the count value is inversely proportional to - the channel's capacitance. - -- touchscreen-fuzz-x : See [2]. - -- touchscreen-fuzz-y : See [2]. - -- touchscreen-fuzz-pressure : See [2]. - -- touchscreen-inverted-x : See [2]. Inversion is applied relative to that - which may already be specified by the device's - FLIP_X and FLIP_Y register fields. - -- touchscreen-inverted-y : See [2]. Inversion is applied relative to that - which may already be specified by the device's - FLIP_X and FLIP_Y register fields. - -- touchscreen-swapped-x-y : See [2]. Swapping is applied relative to that - which may already be specified by the device's - SWITCH_XY_AXIS register field. - -[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt -[1]: Documentation/devicetree/bindings/gpio/gpio.txt -[2]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt - -Example: - - &i2c1 { - /* ... */ - - touchscreen@74 { - compatible = "azoteq,iqs550"; - reg = <0x74>; - interrupt-parent = <&gpio>; - interrupts = <17 4>; - reset-gpios = <&gpio 27 1>; - - touchscreen-size-x = <640>; - touchscreen-size-y = <480>; - - touchscreen-max-pressure = <16000>; - }; - - /* ... */ - }; -- 2.17.1
